- Mounting on a ceiling or gyprock wall, without need of a ground plane
- An extra protection can be added to meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building.
-
Designed and engineered to meet the fire protection codes (NFPA and IFC standards). Please, note that BDA138174 is a generic number. Actual order number will be assigned to a system design. Specific frequencies are required for this product design.
- Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
- Low noise figure, wide dynamic range
- Visual alarms and remote failure monitoring with Graphical User Interface
- FCC and IC certified
- FCC ID: WDM-BDA138174
- IC: 7755A-BDA138174
-
Designed and engineered to meet the fire protection codes (NFPA and IFC standards). Please, note that BDA380512 is a generic number. Actual order number will be assigned to a system design. Specific frequencies are required for this product design.
- Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
- Low noise figure, wide dynamic range
- Visual alarms and remote failure monitoring with Graphical User Interface
- FCC and IC certified
- FCC ID: WDM-BDA380512
- IC: 7755A-BDA380512
-
Ideal for compact high performance applications
- Designed for the combination of two frequencies that require extra isolation. Can also be used as efficient pre-selectors
- An eight cavity configuration is also available for a higher level of isolation and selectivity
- Can be retuned in the field
-
The F-3980 is a wide band dual antenna with an 871F-70 on the base and a 792-70 on the top. The antenna offers for the 871F-70 a choice of radiation patterns that are determined by the dipole-to-mast spacing. The F-3980 has an internal cabling and is not field adjustable. The 871F-70 antenna is offered in a ¼, 3/8, or ½ wave pattern spacing versions. SPEC Sheet
-
The Wide-band design series 26-13-0X-NF covers the range of 130-1000 MHz• Available in 2 way, 3-way or 4-way configuration. • 300 Watt power Handling • Airline design to achieve minimum insertion loss • Low PIM Available • Suitable for outdoor and indoor applications • RoHS 2.0 compliant DOWNLOAD PDF
-
Designed for covert operations which require an effectively invisible antenna hidden inside the bumper of a vehicle.
- Antenna for covert applications
- Easy field tunable
- Fits all vehicles
- Waterproof housing
- Flexible material for easy installation
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building.
- Mounting on a ceiling or gyprock wall, without need of a ground plane
-
Frequency Range: 580-6000 MHz Gain: 8-9 dBd
This antenna is a broadband antenna that can be used for public safety as well as in cellular bands. It makes an ideal solution for a donor antenna for a DAS system. Our In-building system antennas are designed to provide excellent coverage solutions in order for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments. Features:- Rugged design to withstand the most extreme environmental conditions.
- Extra wide bandwidth for use in multiple bands.
-
Models: 58-30-32-ATT (380-520 MHz) These amplifiers will provide higher system dynamic range for fixed receiver systems, tower mounted amplifiers, or boosters.
- Designed for unconditionally stable performance in professional communications systems
- Featuring rugged construction
-
Models: 58-70-32-ATT (700-1000 MHz) These amplifiers will provide higher system dynamic range for fixed receiver systems, tower mounted amplifiers, or boosters.
- Designed for unconditionally stable performance in professional communications systems
- Featuring rugged construction
-
Model: 58-70-32-ATT-DC (700-1000 MHz) In case of failure (DC off or out of range), the RF signal is bypassed, dry contact and red LED alarm are activated.
- Designed for unconditionally stable performance in professional communications systems
- Featuring rugged construction
-
Model: 58-30-32-ATT-DC (380-520 MHz) In case of failure (DC off or out of range), the RF signal is bypassed, dry contact and red LED alarm are activated.
- Designed for unconditionally stable performance in professional communications systems
- Featuring rugged construction
-
Model: 58-10-32-ATT-DC (100-225 MHz) In case of failure (DC off or out of range), the RF signal is bypassed, dry contact and red LED alarm are activated.
- Designed for unconditionally stable performance in professional communications systems
- Featuring rugged construction
-
Models: 58-10-32-ATT (100-225 MHz) These amplifiers will provide higher system dynamic range for fixed receiver systems, tower mounted amplifiers, or boosters.
- Designed for unconditionally stable performance in professional communications systems
- Featuring rugged construction
-
The Comprod 544-90*2 is a 1 inch 4 cavity UHF compact size mobile duplexer. Featuring low loss and temperature compensation over the range of -22 F to +140 F. The use of extruded aluminum cavities and solid shield copper jacketed inter-cabling assure excellent mechanical and electrical stability.
- All units are field tunable and rated at 50 watts continuous duty
- BNC connectors are standard.
- Variations on connectors and mountings are available on special order.
-
The Comprod 544-90*1 is a 1 inch 4 cavity UHF compact size mobile duplexer. Featuring low loss and temperature compensation over the range of -22 F to +140 F. The use of extruded aluminum cavities and solid shield copper jacketed inter-cabling assure excellent mechanical and electrical stability.
- All units are field tunable and rated at 50 watts continuous duty
- BNC connectors are standard.
- Variations on connectors and mountings are available on special order.
-
The Comprod 544-90*3 is a 1 inch 4 cavity UHF compact size mobile duplexer. Featuring low loss and temperature compensation over the range of -22 F to +140 F. The use of extruded aluminum cavities and solid shield copper jacketed inter-cabling assure excellent mechanical and electrical stability.
- All units are field tunable and rated at 50 watts continuous duty
- BNC connectors are standard.
- Variations on connectors and mountings are available on special order.
-
Our line of 800 MHz mobile duplexers feature compact size, low loss and temperature compensation over the range of -22 oF to +140 oF. The use of extruded aluminum cavities and solid shield copper jacketed inter-cabling assure excellent mechanical and electrical stability.
- All units are field tunable and rated at 50 watts continuous duty
- BNC connectors are standard.
- Variations on connectors and mountings are available on special order.
-
Designed for minimizing interference from adjacent channels and outside systems
- Available in single, dual, triple or additional units
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Adjustable loops: each cavity has a calibration index for easy field tuning
-
Designed for minimizing interference from adjacent channels and outside systems
- Available in single, dual, triple or additional units
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Adjustable loops: each cavity has a calibration index for easy field tuning
-
Ideal for compact high performance applications
- Designed for the combination of two frequencies that require extra isolation. Can also be used as efficient pre-selectors
- An eight cavity configuration is also available for a higher level of isolation and selectivity
- Can be retuned in the field
-
- Offered in a 1/4, 3/8 or 1/2 wave spacing version
- The 878F-70 has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
We offer a full line of Power Splitters. The 47-02-XXN and 47-35-XXN series is a hybrid design which provides 20 dB or more of port-to-port isolation. They are typically used on receiver multicoupler applications. They provide low loss above the splitting loss and cover a very wide frequency range. N connectors are standard but other connectors are available. Standard finish is gold Alodine. DOWNLOAD PDF