- Low-profile rugged alternative to a 1/4 wave whip mobile antenna
- When mounted on a horizontal surface, maximum radiation is omnidirectional and vertically polarized
- Impact-resistant ABS radome
-
Ideal for low clearance applications such as those found on trains, public transit vehicles.
-
Our Bandpass preselector filters are designed to improve selectivity in a compact package. They represent an optimized solution for receiver and transmitter. This construction with solid welded cavities, gold Alodine finish, silver-plated loops, and silver-plated tuning rods offers a minimum insertion loss and good stability in temperature. These filters are the ideal solution to be used in crowded RF environment site where the noise is an important factor. DOWNLOAD PDF
-
Our Bandpass preselector filters are designed to improve selectivity in a compact package. They represent an optimized solution for receiver and transmitter. This construction with solid welded cavities, gold Alodine finish, silver-plated loops, and silver-plated tuning rods offers a minimum insertion loss and good stability in temperature. These filters are the ideal solution to be used in crowded RF environment site where the noise is an important factor. DOWNLOAD PDF
-
The (2)987-70 Yagi Antenna is an array of two stacked 987-70 yagi antennas. All our antennas can be completely customized to your particular applications. Our antennas can be black anodized, vertically or horizontally polarized.
- Each antenna has a rugged design to withstand harsh environmental conditions.
- The mounting hardware supplied will permit either vertical or horizontal polarization.
- Support pipe to hold the 2 antennas together is supplied.
- All 980 Series Yagi antennas are fully welded.
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building.
- Designed to be installed on hard surfaces such as concrete or metal structures.
- A layer of Kydex 6200 of 0.3’’ thickness is added to meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
The Enclosed Dipoles with Black Anodized Reflector are available in 2-, 4-, or 8- dipole configurations. These antennas can be adjusted from 60º to 160º. All our antennas can be completely customized to your particular applications. • These antennas have 1/4 wave spacing to the reflector. • Broadband antennas are ideal for trunking or cellular applications. • Reflector is field adjustable and has 6 positions: 60º, 75º, 90º, 105º, 130º and 160º. • Weatherproof radome to ensure continuous service during severe environmental conditions. • Heavy-duty versions are available. Please, contact our Technical Support team for consultation. DOWNLOAD PDF
-
The Enclosed Dipoles with Black Anodized Reflector are available in 2-, 4-, or 8- dipole configurations. These antennas can be adjusted from 60º to 160º. All our antennas can be completely customized to your particular applications. • These antennas have 1/4 wave spacing to the reflector. • Broadband antennas are ideal for trunking or cellular applications. • Reflector is field adjustable and has 6 positions: 60º, 75º, 90º, 105º, 130º and 160º. • Weatherproof radome to ensure continuous service during severe environmental conditions. • Heavy-duty versions are available. Please, contact our Technical Support team for consultation. DOWNLOAD PDF
-
The Enclosed Dipoles with Black Anodized Reflector are available in 2-, 4-, or 8- dipole configurations. These antennas can be adjusted from 60º to 160º. All our antennas can be completely customized to your particular applications. • These antennas have 1/4 wave spacing to the reflector. • Broadband antennas are ideal for trunking or cellular applications. • Reflector is field adjustable and has 6 positions: 60º, 75º, 90º, 105º, 130º and 160º. • Weatherproof radome to ensure continuous service during severe environmental conditions. • Heavy-duty versions are available. Please, contact our Technical Support team for consultation. DOWNLOAD PDF
-
Rugged design to withstand harsh environmental conditions. The 290-70-HD is heavy duty VHF Yagi Antenna. The 290-70-HD has 2 versions: the Center Boom (CB) or End Boom (EB).
- Vertical or horizontal polarization
- DC ground for lightning protection
-
Rugged design to withstand harsh environmental conditions
- Vertical or horizontal polarization
- DC ground for lightning protection
- Black anodized version available
-
Rugged design to withstand harsh environmental conditions
- Vertical or horizontal polarization
- DC ground for lightning protection
- Black anodized version available
-
Ideal for trunking or cellular applications
- This antenna is offered in an offset pattern, 1/4 wave versions.
- This antenna is also available in an offset pattern, 1/2 versions.
- Broadband antennas are ideal for trunking or cellular applications.
- Weatherproof radome to ensure continuous service during severe environmental conditions.
- Versions with 3, 6, and 9-degree downtilt are also available.
- This antenna is Low-PIM (-150 dBc; two 20W carriers).
-
Ideal for trunking or cellular applications.
- This antenna is offered in an offset pattern, 1/4 wave versions.
- Each antenna is also available in an offset pattern, 1/2 wave versions.
- Broadband antennas are ideal for trunking or cellular applications.
- Weatherproof radome to ensure continuous service during severe environmental conditions.
- Versions with 3, 6, and 9-degree downtilt are also available.
-
Ideal for trunking or cellular applications
- This antenna is offered in an offset pattern, 1/4 wave versions.
- Each antenna is also available in an offset pattern, 1/2 wave versions.
- Broadband antennas are ideal for trunking or cellular applications.
- Weatherproof radome to ensure continuous service during severe environmental conditions.
- Versions with 3, 6, and 9-degree downtilt are also available.
-
Our Control Station Combiners (CSC) is an ideal solution to reduce the number of antennas required on a communications site by maintaining a high radio-to-radio isolation at all times. It can significantly reduce tower clutter and loading, and simplify cabling installation at control center facilities. This product provides frequency-agile operation across a frequency range from 136 up to 174 MHz. This combiner has the possibilities to be connected to two antennas TX and RX. In case of only one antenna is used for TX and RX, an external duplexer is required. DOWNLOAD PDF
-
Our Control Station Combiners (CSC) is an ideal solution to reduce the number of antennas required on a communications site by maintaining a high radio-to-radio isolation at all times. It can significantly reduce tower clutter and loading, and simplify cabling installation at control center facilities. This product provides frequency-agile operation across a frequency range from 746 up to 869 MHz covering the public safety bands 700 and 800. This combiner has the possibilities to be connected to two antennas TX and RX. In case of only one antenna is used for TX and RX, an external duplexer is required. This unit is also available in 8, 12, 16 and 32 ports configuration. DOWNLOAD PDF
-
For optimal performance two bumper antennas are installed in a vehicle: one at the front of the vehicle and one at the rear. The Comprod power splitter (SPLT-BUMP-400900) is designed to help to create an omnidirectional pattern around the vehicle and enable better network coverage. DOWNLOAD PDF
-
The 884-70-HDLM is a Wide Band, Omnidirectional Antenna specifically designed for trunked multicoupled and X-pass systems with an internal cabling design. It is extremely rugged and is well suited for use in severe environmental conditions.
- This antenna is field adjustable for Omni or Bidirectional coverage.
-
Ideal for high power, close frequency separation installations
- Designed for combining two frequencies that require extra isolation. Can also be used as efficient pre-selectors
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Adjustable loops
-
Ideal for high power, close frequency separation installations
- Designed for combining two frequencies that require extra isolation. Can also be used as efficient pre-selectors
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Adjustable loops
-
Designed for covert operations which require an effectively invisible antenna hidden inside the bumper of a vehicle. Installed at the front and rear of the vehicle, this dual kit will help you create an omnidirectional pattern around the vehicle allowing better network coverage and an optimal performance.
- Bumper Antenna for covert applications
- No tuning required
- Fits all vehicles
- Waterproof housing
- Flexible material for easy installation
- 17 feet RG-8X feed cable and connector included
-
Designed for covert operations which require an effectively invisible antenna hidden inside the bumper of a vehicle. Installed at the front and rear of the vehicle, this dual kit will help you create an omnidirectional pattern around the vehicle allowing better network coverage and an optimal performance.
- Front and Rear Antenna for covert applications
- No tuning required
- Fits all vehicles
- Waterproof housing
- Flexible material for easy installation
- 25 feet RG-8X feed cable and connector included
-
Designed for covert operations which require an effectively invisible antenna hidden inside the bumper of a vehicle.
- Front and Rear Antenna for covert applications
- Easy field tunable
- Fits all vehicles
- Waterproof housing
- Flexible material for easy installation
-
Our new mounting solution UWB-MOUNT-KIT for UWB1301000-NF and UWB1304000-NF has been designed for applications where the antenna will be installed on a surface other than a ceiling or gyprock wall, such as: wood, metal or concrete. DOWNLOAD PDF