- Offered with Fire Retardant 6200 Kydex or ABS radomes
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
-
Unity gain, base-loaded antenna with a power handling capacity of 200 Watts
- Manufactured using the best corrosion-resistant materials and finishes available
- Triple-plated chrome brass with a large insert, molded low-loss coil form and spring-loaded gold-plated contact
- Large diameter coil form which allows for a wider operational bandwidth and better matching characteristics
- O-ring seals and overlap construction to ensure a moisture-proof installation
-
Broadband 1/2-wave antenna - no ground plane needed
- Manufactured using the best corrosion-resistant materials and finishes available
- Triple-plated chrome brass with a large insert, molded low-loss coil form and spring-loaded gold-plated contact
- Rubber boot to ensure a moisture-proof installation/avoid scratching or rusting of the vehicle
-
No ground plane antenna
- 2.0 dBd of gain over its operating bandwidth
- Manufactured using the best corrosion-resistant materials and finishes available
- Triple-plated chrome brass with a large insert molded low-loss coil form and spring-loaded, gold-plated contact
- Rubber boot ensures a moisture-proof installation
- Standard Motorola C, M type mount
-
- 3.0 dBd gain achieved by featuring a 5/8-wave whip with a base loaded matching coil
- Manufactured using the best corrosion-resistant materials and finishes available
- Triple-plated chrome brass with a large insert molded low-loss coil form and spring-loaded, gold-plated contact
- O-ring seals and overlap construction to ensure a moisture-proof installation
- Standard Motorola NMO type mount
-
Omnidirectional antenna for wide frequency band applications. Ideal for mounting on buildings
- Available in UHF configuration (3 frequency splits)
- Rugged design to withstand the most extreme environmental conditions.
- The mounting hardware supplied will permit 0.75” to 2.38” O.D. pipe installation.
- DC ground for lightning protection
-
Omnidirectional antenna for wide frequency band applications. Ideal for mounting on buildings
- Available in VHF configuration (1 frequency split)
- Rugged design to withstand the most extreme environmental conditions.
- The mounting hardware supplied will permit 0.75” to 2.38” O.D. pipe installation.
- DC ground for lightning protection
-
Omnidirectional antenna for wide frequency band applications. Ideal for mounting on buildings
- Available in VHF configuration (2 frequency splits)
- Rugged design to withstand the most extreme environmental conditions.
- The mounting hardware supplied will permit 0.75” to 2.38” O.D. pipe installation.
- DC ground for lightning protection
-
Omnidirectional antenna for wide frequency band applications. Ideal for mounting on buildings
- Available in VHF configuration (3 frequency splits)
- Rugged design to withstand the most extreme environmental conditions.
- The mounting hardware supplied will permit 0.75” to 2.38” O.D. pipe installation.
- DC ground for lightning protection
-
Very large bandwidth which make it ideal for emergency use or resale
- Rugged design to withstand the most extreme environmental conditions
- The mounting hardware supplied will permit 0.75” to 2.3/8” O.D. pipe installation.
- DC ground for lightning protection
-
Adjustable, fixed, side or top mount antenna
- Offered in a 1/4, 3/8 or 1/2 wave spacing version
- The 871A-70-2 has external cabling and a field-adjustable pattern.
- The 871F-70-2 has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
- Offered in a 1/4, 3/8 or 1/2 wave spacing version
- The 878F-70 has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
Adjustable, fixed, side or top mount antenna
- Offered in a 1/4, 3/8 or 1/2 wave spacing version
- The 874A-70 has external cabling and a field-adjustable pattern.
- The 874F-70 has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
Adjustable, fixed, side or top mount antenna
- Offered in a 1/4, 3/8 or 1/2 wave spacing version
- The 872A-70 has external cabling and a field-adjustable pattern.
- The 872F-70 has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
The 872/872F-70-2TM antenna is a wide band dual band antenna designed for multicoupled systems. The antenna covers the 138-174 MHz and 215-225 MHz band, and offers a choice of radiation patterns that are determined by the dipole-to-mast spacing. This antenna is very rugged. It has an internal cabling; it is not field adjustable. The 872/872F-70-2TM antenna is well suited for use in severe environmental conditions. The antenna is offered in a ¼, ⅜ or ½ wave pattern spacing versions. DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS FOR VHF band DOWNLOAD DIGITAL PATTERNS FOR 215-225 MHz
-
Dual, Triple, and Quad Feed Exposed Dipole Array The (2)871F-70, (3)871F-70, and (4)871F-70 are wide band multiple antennas designed for multicoupled systems. The antenna offers a choice of radiation patterns that are determined by the dipole-to-mast spacing. • These antennas have internal cabling and are not field adjustable. • Each antenna is offered in a 1/4, 3/8, or 1/2 wave pattern spacing versions. • Typical antenna to antenna isolation is 30dB, versions with 40 dB of isolation are also available. • Heavy duty versions are available. Please contact Comprod Inc. Technical support technician for consultation. DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
-
Adjustable, fixed, side or top mount antenna
- Offered in a 1/4, 3/8 or 1/2 wave spacing version
- The 871A-70 has external cabling and a field-adjustable pattern.
- The 871F-70 has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
870 Aviation Series. Adjustable, fixed, side or top mount antenna
- Offered in a 1/4 or 3/8 wave spacing version
- The 874A-70-A has external cabling and a field-adjustable pattern.
- The 874F-70-A has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
870 Aviation Series. Adjustable, fixed, side or top mount antenna
- Offered in a 1/4 or 3/8 wave spacing version
- The 872A-70-A has external cabling and a field-adjustable pattern.
- The 872F-70-A has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
870 Aviation Series. Adjustable, fixed, side or top mount antenna
- Offered in a 1/4 or 3/8 wave spacing version
- The 871A-70-A has external cabling and a field-adjustable pattern.
- The 871F-70-A has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
Adjustable, fixed, side or top mount antenna
- Offered in a 1/4 or 3/8 wave spacing version
- The 874A-70-F has external cabling and a field-adjustable pattern.
- The 874F-70-F has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
Adjustable, fixed, side or top mount antenna
- Offered in a 1/4 or 3/8 wave spacing version
- The 872A-70-F has external cabling and a field-adjustable pattern.
- The 872F-70-F has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
Adjustable, fixed, side or top mount antenna
- Offered in a 1/4 or 3/8 wave spacing version
- The 871A-70-F has external cabling and a field-adjustable pattern.
- The 871F-70-F has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
Available in single and dual configurations
- Available in a Low Band configuration (8 frequency splits)
- Rugged design to withstand the most extreme environmental conditions
- Constructed from high strength, corrosion-resistant aluminum alloy, hot galvanized steel mounting hardware
- Unique PVC off-set support arms
- Supplied with anti-torque supports
- DC ground for lightning protection
- Black anodized coating available for enhanced anti-corrosion and de-icing properties
-
Available in single and dual configurations
- Available in a Low Band configuration (8 frequency splits)
- Rugged design to withstand the most extreme environmental conditions
- Constructed from high strength, corrosion-resistant aluminum alloy, hot galvanized steel mounting hardware
- Supplied with unique PVC off-set anti-torque support arm
- DC ground for lightning protection
- Black anodized coating available for enhanced anti-corrosion and de-icing properties
-
The Low Band Exposed Dipole Antenna Series are available in our standard or heavy-duty construction. These exposed dipole antennas come in both single and dual configurations, depending on the gain required. They are constructed from high strength, corrosion resistant aluminum alloy, hot galvanized steel mounting hardware, and use unique PVC off-set support arms. Our heavy-duty versions have dual support braces and use a superior anti-torque support. All components are oversized.
- Each antenna has a rugged design to withstand the most extreme environmental conditions.
- Supplied with anti-torque supports.
- DC ground for lightning protection.
- Can be black anodized coating for enhanced anti-corrosion and de-icing properties
-
Available in single and dual configurations
- Available in a Low Band configuration (8 frequency splits)
- Rugged design to withstand the most extreme environmental conditions
- Constructed from high strength, corrosion-resistant aluminum alloy, hot galvanized steel mounting hardware
- Unique PVC off-set support arms
- Supplied with anti-torque supports
- DC ground for lightning protection
- Black anodized coating available for enhanced anti-corrosion and de-icing properties
-
Available in single and dual configurations
- Available in a Low Band configuration (8 frequency splits)
- Rugged design to withstand the most extreme environmental conditions
- Constructed from high strength, corrosion-resistant aluminum alloy, hot galvanized steel mounting hardware
- Supplied with unique PVC off-set anti-torque support arm
- DC ground for lightning protection
- Black anodized coating available for enhanced anti-corrosion and de-icing properties
-
Adjustable, fixed, side or top mount antenna
- Offered in a 1/4, 3/8 or 1/2 wave spacing version
- The 872A-70-2 has external cabling and a field-adjustable pattern.
- The 872F-70-2 has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
Adjustable, fixed, side or top mount antenna
- Offered in a 1/4, 3/8 or 1/2 wave spacing version
- The 874A-70-2 has external cabling and a field-adjustable pattern.
- The 874F-70-2 has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
Adjustable-only, side mount or top mount antenna
- External cabling and field adjustable pattern
- Heavy-duty and black anodized versions available
-
Adjustable-only, side mount or top mount antenna
- External cabling and field adjustable pattern
- Heavy-duty and black anodized versions available
-
Adjustable-only, side mount or top mount antenna
- External cabling and field adjustable pattern
- Heavy-duty and black anodized versions available
-
Ideal for state or country borders
- Offered in a 3/8 wave version
- Fully welded
- The reflectors provide more directivity and greater front-to-back ratios.
- The exposed dipoles have internal cabling and fixed dipole- mast spacing.
- Side or top mount, heavy-duty and black anodized versions available
-
Ideal for state or country borders
- Offered in a 3/8 wave version
- Fully welded
- The reflectors provide more directivity and greater front-to-back ratios.
- The exposed dipoles have internal cabling and fixed dipole- mast spacing.
- Side or top mount, heavy-duty and black anodized versions available
-
Ideal for state or country borders
- Offered in a 3/8 wave version
- Fully welded
- The reflectors provide more directivity and greater front-to-back ratios.
- The exposed dipoles have internal cabling and fixed dipole- mast spacing.
- Side or top mount, heavy-duty and black anodized versions available