- Low-profile rugged alternative to a 1/4 wave whip mobile antenna
- When mounted on a horizontal surface, maximum radiation is omnidirectional and vertically polarized
- Impact-resistant ABS radome
-
Ideal for low clearance applications such as those found on trains, public transit vehicles. -
Our Bandpass preselector filters are designed to improve selectivity in a compact package. They represent an optimized solution for receiver and transmitter. This construction with solid welded cavities, gold Alodine finish, silver-plated loops, and silver-plated tuning rods offers a minimum insertion loss and good stability in temperature. These filters are the ideal solution to be used in crowded RF environment site where the noise is an important factor. DOWNLOAD PDF
-
Our Bandpass preselector filters are designed to improve selectivity in a compact package. They represent an optimized solution for receiver and transmitter. This construction with solid welded cavities, gold Alodine finish, silver-plated loops, and silver-plated tuning rods offers a minimum insertion loss and good stability in temperature. These filters are the ideal solution to be used in crowded RF environment site where the noise is an important factor. DOWNLOAD PDF
-
Designed for minimizing interference from adjacent channels and outside systems
- Available in single, dual, triple or additional units
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Adjustable loops: each cavity has a calibration index for easy field tuning
-
Designed for minimizing interference from adjacent channels and outside systems
- Available in single, dual, triple or additional units
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Adjustable loops: each cavity has a calibration index for easy field tuning
-
Designed for minimizing interference from adjacent channels and outside systems
- Available in single, dual, triple or additional units
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Adjustable loops: each cavity has a calibration index for easy field tuning
-
Designed for minimizing interference from adjacent channels and outside systems
- Available in single, dual, triple or additional units
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Adjustable loops: each cavity has a calibration index for easy field tuning
-
- Frequency range of 138-174 MHz
- Unity gain achieved over its operating bandwidth
- Used for vehicles, such as ambulances, where vertical clearance is critical
- This antenna is ideal for a vehicle that enters areas with reduced headroom
- Combined with a matching circuit that is mounted inside the vehicle
- Each antenna assembly is individually calibrated on the roof of a vehicle
-
Adjustable, fixed, side or top mount antenna
- Offered in a 1/4, 3/8 or 1/2 wave spacing version
- The 871A-70-2 has external cabling and a field-adjustable pattern.
- The 871F-70-2 has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
- Offered in a 1/4, 3/8 or 1/2 wave spacing version
- The 878F-70 has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
Adjustable, fixed, side or top mount antenna
- Offered in a 1/4, 3/8 or 1/2 wave spacing version
- The 874A-70 has external cabling and a field-adjustable pattern.
- The 874F-70 has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
Adjustable, fixed, side or top mount antenna
- Offered in a 1/4, 3/8 or 1/2 wave spacing version
- The 872A-70 has external cabling and a field-adjustable pattern.
- The 872F-70 has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
The 872/872F-70-2TM antenna is a wide band dual band antenna designed for multicoupled systems. The antenna covers the 138-174 MHz and 215-225 MHz band, and offers a choice of radiation patterns that are determined by the dipole-to-mast spacing. This antenna is very rugged. It has an internal cabling; it is not field adjustable. The 872/872F-70-2TM antenna is well suited for use in severe environmental conditions. The antenna is offered in a ¼, ⅜ or ½ wave pattern spacing versions. DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS FOR VHF band DOWNLOAD DIGITAL PATTERNS FOR 215-225 MHz
-
Dual, Triple, and Quad Feed Exposed Dipole Array The (2)871F-70, (3)871F-70, and (4)871F-70 are wide band multiple antennas designed for multicoupled systems. The antenna offers a choice of radiation patterns that are determined by the dipole-to-mast spacing. • These antennas have internal cabling and are not field adjustable. • Each antenna is offered in a 1/4, 3/8, or 1/2 wave pattern spacing versions. • Typical antenna to antenna isolation is 30dB, versions with 40 dB of isolation are also available. • Heavy duty versions are available. Please contact Comprod Inc. Technical support technician for consultation. DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
-
Adjustable, fixed, side or top mount antenna
- Offered in a 1/4, 3/8 or 1/2 wave spacing version
- The 871A-70 has external cabling and a field-adjustable pattern.
- The 871F-70 has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
Adjustable-only, side mount or top mount antenna
- External cabling and field adjustable pattern
- Heavy-duty and black anodized versions available
-
Adjustable-only, side mount or top mount antenna
- External cabling and field adjustable pattern
- Heavy-duty and black anodized versions available
-
Adjustable-only, side mount or top mount antenna
- External cabling and field adjustable pattern
- Heavy-duty and black anodized versions available
-
Ideal for state or country borders
- Offered in a 3/8 wave version
- Fully welded
- The reflectors provide more directivity and greater front-to-back ratios.
- The exposed dipoles have internal cabling and fixed dipole- mast spacing.
- Side or top mount, heavy-duty and black anodized versions available
-
Ideal for state or country borders
- Offered in a 3/8 wave version
- Fully welded
- The reflectors provide more directivity and greater front-to-back ratios.
- The exposed dipoles have internal cabling and fixed dipole- mast spacing.
- Side or top mount, heavy-duty and black anodized versions available
-
Ideal for state or country borders
- Offered in a 3/8 wave version
- Fully welded
- The reflectors provide more directivity and greater front-to-back ratios.
- The exposed dipoles have internal cabling and fixed dipole- mast spacing.
- Side or top mount, heavy-duty and black anodized versions available
-
The 876F-70-HDWTM40-1/2 Dual Exposed Dipole is well suited for multicoupled systems due to its wide bandwidth. It has an extremely rugged design for use in severe environmental conditions. The 876F-70-HDWTM40-1/2 has internal cabling and a fix dipole-to-mast spacing. The 876F-70-HDWTM40-1/2 is a special version of the 876F-70 with increased spacing between the two antennas, giving an isolation of 40 dB. This antenna can be black anodized, please contact technical support for more information.
- The 1/4 wave and 3/8 wave versions of the antenna are also available.
- The Side Mount version is available.
-
Ideal for applications where costs are calculated per antenna
- Available in many configurations
- VHF, UHF or 700/800/900 MHz antennas can be combined onto one mast
- Mix and match with our 770, 790, 840, 870 and 880 series antennas
- Can be configured for side or top mount
- Low VSWR version with maximum gain over specified frequency
- Certain versions of antennas have an adjustable pattern for 3 dBd omnidirectional or 6 dBd offset coverage
- Heavy-duty versions available
-
Offered in omnidirectional or bi-directional versions
- Internal cabling, fixed dipole-mast spacing and adjustable pattern control
- Heavy-duty, black anodized and top mount only versions available
