Combines multiple receiver frequencies onto the same antenna
9W-FF-PPCBB
| 9 | Series 90 | |||||||||
| W | 1,2 | Number of Pass Windows | ||||||||
| FF | 79 | 794-806 MHz | ||||||||
| 80 | 806-824 MHz | |||||||||
| First 2 digits of Freq.
38/40/43/45/47 |
380-512 MHz | |||||||||
| PP | 2,4,8,16,24 | Number of Ports | ||||||||
| C | N/B | N or BNC Connectors | ||||||||
| BB | 02/03/06/12/15/18/30 | Bandwidth in MHz | ||||||||
Example: Model # 91-80-8N18
RX Multicoupler, 1 Pass Window, 806MHz,
8 Output Ports, N female, 18 MHz Bandwidth
Our expandable receiver multicoupler provides an affordable means of combining multiple receiver frequencies onto the same antenna. They are available in 2, 4, 8, 12 and 16 port configurations.
| Frequency Range, MHz | UHF / 794-824 |
|---|---|
| Number of Output Ports | 2 to 16 (24 and 32 port versions are available) |
| Input Preselector Bandwidth Options | UHF model: 2 or 3 MHz Bandwidth / 380-512 MHz |
| VSWR | 1.5:1 |
| Amplifier Gain, dB | 19 typical |
| Amplifier Output IP3, dB | +38 min. |
| Amplifier Noise Figure (LNA), dB | 1.9 typical |
| Manual Attenuation Selection | 0 to –10dB in 1 dB steps |
| Rx to Rx Isolation, dB | >20 |
| Tx Band Rejection | UHF model: >40 dB at 2MHz TX-RX |
| Connector, Input | N Female |
| Connector, Output | N Female |
| Connector, Signal Sampler | BNC (Female) |
| Standard Power Input, Volts | 110/220 VAC 50/60Hz 10W |
| AC Power Input Connector | Hardwired 3-wire |
| DC Power (Optional) | 13-28 VDC |
| Mounting | UHF model: EIA Standard 19” 3 RU |
| Temperature Range, ºC | -30 to +60 |
