Antennas & Clamps

Renowned for their superior performance, quality and reliability, Comprod’s antennas are designed to excel in the most hostile environments. Manufactured with the highest quality electrical and mechanical components, built with precision and strength, they feature sealed cable connections, crimped and soldered connectors, moisture-resistant wire harnesses and welded junctions which make them ideally suited for Mission-Critical applications. Our antennas can also be tailored to fit specific needs, based on unique RF network or product applications (e.g. : increased mast height for higher elevation mounting, customized mast separated into two sections for easier handling inside elevators, etc.).
 
KEY FEATURES AND OPTIONS:
• Heavy-duty – Oversized, hyper-strengthened and designed to exceed specifications
• Welded – Ideal for high winds and icing conditions
• Black Anodized – An electrically-plated protective coating particularly good for heavy icing and corrosive environments
• Cable Lengths – Usually 2 feet is standard but the feed line length can be adapted to your needs (up to 125ft.)
• Connectors – Type N is our usual standard connector, but this can be factory-altered as required
• Custom Mounting Configurations
• Custom Antennas
• Low PIM – Our new line of low PIM antennas dramatically reduces mechanical junctions. They also use double-shielded coaxial cable (multiple versions are available).

  • Circular Polarized Antenna
    205-70

    Frequency Range: 138-174, 406-512, 764-806, 806-866, 900-960 MHz
    Gain: Unity
    Constructed from high strength, corrosion resistant aluminum alloy and stainless steel
    • Available in VHF, UHF, 800/900 MHz configurations
    • Rugged design to withstand harsh environmental conditions
    • Circular polarization
    • DC ground for lightning protection
    This antennas are available in both Right Hand Circular Polarization (RHCP) and Left Hand Circular Polarization (LHCP). SPEC SHEET VHF SPEC SHEET UHF SPEC SHEET 700/800/900
  • 470-70 VHF Corner Reflector Antenna

    Frequency Range: 132-174 MHz
    Gain: 7 dBd
    Broadband, ideal for point-to-point applications
    • Available in VHF, UHF, 700/800/900 MHz configurations
    • Good directivity, very high front-to-back ratio
    • Performance is constant throughout the band
    • Rugged design to withstand harsh environmental conditions
    • Ultra-low VSWR ratings
    • Vertical or horizontal polarization
    • DC ground for lightning protection
    • Heavy-duty versions available
    DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
  • 471-70 VHF Corner Reflector Antenna

    471-70 VHF Corner Reflector Antenna

    Frequency Range: 132-174 MHz
    Gain: 10 dBd
    Broadband, ideal for point-to-point applications
    • Available in VHF, UHF, 700/800/900 MHz configurations
    • Good directivity, very high front-to-back ratio
    • Performance is constant throughout the band
    • Rugged design to withstand harsh environmental conditions
    • Ultra-low VSWR ratings
    • Vertical or horizontal polarization
    • DC ground for lightning protection
    • Heavy-duty versions available
    DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
  • 250-70 VHF Yagi Antenna

    Frequency Range: 138-174 MHz
    Gain: 7 dBd
    The 290 Series VHF Yagi antennas are available in 2, 3, and 6 element configurations. All of our antennas can be completely customized to your applications. Our antennas can be black anodized, vertically or horizontally polarized, and heavy-duty versions are available. This antenna is extended boom. A center mount model is also available. Rugged design to withstand harsh environmental conditions
    • Vertical or horizontal polarization
    • DC ground for lightning protection
    • Black anodized and heavy-duty versions available
    DOWNLOAD PDF DOWNLOAD DIGITAL PATTERN
  • F-3647 Dual Antenna Array

    F-3647 Dual Antenna Array

    Frequency Range: 138-174 / 406-470 MHz
    Gain: 2.0-2.5 dBd
    Ideal for applications where costs are calculated per antenna
    • Available in many configurations
    • VHF, UHF or 700/800/900 MHz antennas can be combined onto one mast
    • Mix and match with our 770, 790 and 870 series antennas
    • Can be configured for side or top mount
    • Low VSWR version with maximum gain over the specified frequencies
    • Heavy-duty versions available
    DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS  
  • F-3661 Dual Antenna Array

    F-3661 Dual Antenna Array

    Frequency Range: 138-174 / 406-470 MHz
    Gain: 5.0-5.5 dBd
    Ideal for applications where costs are calculated per antenna
    • Available in many configurations
    • VHF, UHF or 700/800/900 MHz antennas can be combined onto one mast
    • Mix and match with our 770, 790 and 870 series antennas
    • Can be configured for side or top mount
    • Low VSWR version with maximum gain over the specified frequencies
    • Heavy-duty versions available
    DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS  
  • F-3676 Dual Antenna Array

    F-3676 Dual Antenna Array

    Frequency Range: 138-174 / 406-470 MHz
    Gain: 8.0-8.5 dBd
    Ideal for applications where costs are calculated per antenna
    • Available in many configurations
    • VHF, UHF or 700/800/900 MHz antennas can be combined onto one mast
    • Mix and match with our 770, 790 and 870 series antennas
    • Can be configured for side or top mount
    • Low VSWR version with maximum gain over the specified frequencies
    • Heavy-duty versions available
    DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
  • 884-70 VHF Exposed Dipole Array

    Frequency Range: 138-174 MHz
    Gain: 6.0/8.5 dBd
    Offered in Omnidirectional or Bi-directional versions
    • Internal cabling, fixed dipole-mast spacing and adjustable pattern control
    • Heavy-duty, black anodized  and top mount only versions available
    DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
  • F-33029D-SM-1/2 Wideband Antenna with Black Anodized Boom and Dipoles

    Frequency Range: 138-174 MHz
    Gain: 8.0 - 8.5 dBd
    The F-33029D-SM-1/2 is is a Wide Band Antenna with Black Anodized boom and dipoles. It is specifically designed for trunked Multicoupler such as X-pass systems. The 1/2 Wavelength dipole to mast spacing offers a bidirectional radiation pattern. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-SM-1/2 has internal cabling design and is not field adjustable.
    • 1/4 wavelength dipole-to-mast spacing is also available for the offset radiation pattern.
    • 3/8 wavelength dipole-to-mast spacing is also available for a radiation pattern between the elliptic and the offset.
    DOWNLOAD PDF  
  • F-33029D-SM-1/4 Wideband Antenna with Black Anodized Boom and Dipoles

    Frequency Range: 138-174 MHz
    Gain: 8.0 - 8.5 dBd
    The F-33029D-SM-1/4 is is a Wide Band Antenna with Black Anodized boom and dipoles. It is specifically designed for trunked Multicoupler such as X-pass systems. The 1/4 Wavelength dipole to mast spacing offers an offset radiation pattern. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-SM-1/4 has internal cabling design and is not field adjustable.
    • 1/2 wavelength dipole-to-mast spacing is also available for the bidirectional radiation pattern.
    • 3/8 wavelength dipole-to-mast spacing is also available for a radiation pattern between the elliptic and the offset.
    DOWNLOAD PDF  
  • F-33029D-SM-3/8 Wideband Antenna with Black Anodized Boom and Dipoles

    Frequency Range: 138-174 MHz
    Gain: 8.0 - 8.5 dBd
    The F-33029D-SM-3/8 is is a Wide Band Antenna with Black Anodized boom and dipoles. It is specifically designed for trunked Multicoupler such as X-pass systems. The 3/8 Wavelength dipole to mast spacing offers a radiation pattern between the elliptic and the offset. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-SM-3/8 has internal cabling design and is not field adjustable.
    • 1/4 wavelength dipole-to-mast spacing is also available for the offset radiation pattern.
    • 1/2 wavelength dipole-to-mast spacing is also available for a bidirectional radiation pattern.
    DOWNLOAD PDF  
  • F-33029D-TM-1/2 Wideband Black Anodized Antenna

    Frequency Range: 138-174 MHz
    Gain: 8.0 - 8.5 dBd
    The F-33029D-TM-1/2 is is a Wideband Black Anodized Antenna. It is specifically designed for trunked Multicoupler such as X-pass systems. The 1/2 Wavelength dipole to mast spacing offers a bidirectional radiation pattern. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-TM-1/2 has internal cabling design and is not field adjustable.
    • 1/4 wavelength dipole-to-mast spacing is also available for the offset radiation pattern.
    • 3/8 wavelength dipole-to-mast spacing is also available for a radiation pattern between the elliptic and the offset.
    DOWNLOAD PDF  
  • F-33029D-TM-1/4 Wideband Black Anodized Antenna

    Frequency Range: 138-174 MHz
    Gain: 8.0 - 8.5 dBd
    The F-33029D-TM-1/4 is is a Wideband Black Anodized Antenna. It is specifically designed for trunked Multicoupler such as X-pass systems. The 1/4 Wavelength dipole to mast spacing offers an offset radiation pattern. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-TM-1/4 has internal cabling design and is not field adjustable.
    • 1/2 wavelength dipole-to-mast spacing is also available for the bidirectional radiation pattern.
    • 3/8 wavelength dipole-to-mast spacing is also available for a radiation pattern between the elliptic and the offset.
    DOWNLOAD PDF  
  • F-33029D-TM-3/8 Wideband Black Anodized Antenna

    Frequency Range: 138-174 MHz
    Gain: 8.0 - 8.5 dBd
    The F-33029D-TM-3/8 is is a Wideband Black Anodized Antenna. It is specifically designed for trunked Multicoupler such as X-pass systems. The 3/8 Wavelength dipole to mast spacing offers a radiation pattern between the elliptic and the offset. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-TM-3/8 has internal cabling design and is not field adjustable.
    • 1/4 wavelength dipole-to-mast spacing is also available for the offset radiation pattern.
    • 1/2 wavelength dipole-to-mast spacing is also available for a bidirectional radiation pattern.
    DOWNLOAD PDF  
  • F-33030-D Wideband Ultra Heavy Duty Omnidirectional Antenna

    Frequency Range: 138-174 MHz
    Gain: 6.0 dBd
    The F-33030-D is a Wide Band Ultra Heavy Duty Omnidirectional Antenna specifically designed for trunked multicoupled and X-pass systems applications. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints.
    • The F-33030-D has internal cabling design and is not field adjustable.
    • Mast 4,5" (114.3 mm) O.D.
    • Passive Intermodulation Specification is measured in the third order intermodulation products, using two 20 watts (+43 dBm) Carriers.
    DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
  • F-33031-D Wideband Heavy Duty Omnidirectional Antenna

    Frequency Range: 138-174 MHz
    Gain: 6.0 dBd
    The F-33031-D is a Wide Band Heavy Duty Omnidirectional Antenna specifically designed for trunked multicoupled and X-pass systems applications. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints.
    • The F-33031-D has internal cabling design and is not field adjustable.
    • Mast 3,5" (88.9 mm) O.D.
    • Passive Intermodulation Specification is measured in the third order intermodulation products, using two 20 watts (+43 dBm) Carriers.
    DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
  • F-3647 Wideband Dual Antenna

    Frequency Range: 138-174 (871F-70), 406-512 (771-70) MHz
    Gain: 2.0-2.5 dBd
    The F-3647 is a wideband dual antenna with an 871F-70 on the base and a 771-70 on the top. The antenna offers for the 871F-70 & 771-70 a choice of radiation patterns that are determined by the dipole-to-mast spacing. The F-3647 has an internal cabling and is not field adjustable. The 871F-70 & 771-70 antenna is offered in a ¼, 3/8, or ½ wave pattern spacing versions. The antenna can be black anodized. Heavy Duty version of the antenna is also available. DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
  • F-3647-HD Heavy Duty Wideband Dual Antenna

    Frequency Range: 138-174 (871F-70), 406-512 (771-70) MHz
    Gain: 2.0-2.5 dBd
    The F-3647 is a heavy duty wideband dual antenna with an 871F-70 on the base and a 771-70 on the top. The antenna offers for the 871F-70 & 771-70 a choice of radiation patterns that are determined by the dipole-to-mast spacing. The F-3647 has an internal cabling and is not field adjustable. The 871F-70 & 771-70 antenna is offered in a ¼, 3/8, or ½ wave pattern spacing versions. The antenna can be black anodized. Heavy Duty version of the antenna is also available. DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
  • 882-70 VHF Exposed Dipole Array

    Frequency Range: 138-174 MHz
    Gain: 3.0/5.5 dBd
    Offered in omnidirectional or bi-directional versions
    • Internal cabling, fixed dipole-mast spacing and adjustable pattern control
    • Heavy-duty, black anodized  and top mount only versions available
    DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
  • 876-70 Dual Exposed Dipole Array

    876F-70 Dual Exposed Dipole Array

    Frequency Range: 138-174 MHz
    Gain: 5.0-5.5 dBd
    Ideal for applications where costs are calculated per antenna
    • Available in many configurations
    • VHF, UHF or 700/800/900 MHz antennas can be combined onto one mast
    • Mix and match with our 770, 790, 840, 870 and 880 series antennas
    • Can be configured for side or top mount
    • Low VSWR version with maximum gain over specified frequency
    • Certain versions of antennas have an adjustable pattern for 3 dBd omnidirectional or 6 dBd offset coverage
    • Heavy-duty versions available
    DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
  • F-3766 VHF Exposed Dipole with Reflectors

    F-3766 VHF Exposed Dipole with Reflectors

    Frequency Range: 138-174 MHz
    Gain: 9-10 dBd
    Ideal for state or country borders
    • Offered in a 3/8 wave version
    • Fully welded
    • The reflectors provide more directivity and greater front-to-back ratios.
    • The exposed dipoles have internal cabling and fixed dipole- mast spacing.
    • Side or top mount, heavy-duty and black anodized versions available
    DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS  
  • F-3713 VHF Exposed Dipole with Reflectors

    F-3713 VHF Exposed Dipole with Reflectors

    Frequency Range: 138-174 MHz
    Gain: 7 dBd
    Ideal for state or country borders
    • Offered in a 3/8 wave version
    • Fully welded
    • The reflectors provide more directivity and greater front-to-back ratios.
    • The exposed dipoles have internal cabling and fixed dipole- mast spacing.
    • Side or top mount, heavy-duty and black anodized versions available
    DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
  • F-3729 VHF Exposed Dipole with Reflectors

    F-3729 VHF Exposed Dipole with Reflectors

    Frequency Range: 138-174 MHz
    Gain: 2.5-3.0 dBd
    Ideal for state or country borders
    • Offered in a 3/8 wave version
    • Fully welded
    • The reflectors provide more directivity and greater front-to-back ratios.
    • The exposed dipoles have internal cabling and fixed dipole- mast spacing.
    • Side or top mount, heavy-duty and black anodized versions available
    DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
     
  • 874-70-LM VHF Exposed Dipole (Without Mast)

    Frequency Range: 138-174 MHz
    Gain: 8.0-8.5 dBd
    Adjustable-only, side mount or top mount antenna
    • External cabling and field adjustable pattern
    • Heavy-duty and black anodized versions available
    DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
  • 872-70-LM VHF Exposed Dipole (Without Mast)

    Frequency Range: 138-174 MHz
    Gain: 5.0-5.5 dBd
    Adjustable-only, side mount or top mount antenna
    • External cabling and field adjustable pattern
    • Heavy-duty and black anodized versions available
    DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
  • 871-70-LM VHF Exposed Dipole (Without Mast)

    Frequency Range: 138-174 MHz
    Gain: 2.0-2.5 dBd
    Adjustable-only, side mount or top mount antenna
    • External cabling and field adjustable pattern
    • Heavy-duty and black anodized versions available
    DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
  • 871F-70 VHF Exposed Dipole

    871F-70 VHF Exposed Dipole

    Frequency Range: 138-174 MHz
    Gain: 2.0-2.5 dBd
    Adjustable, fixed, side or top mount antenna
    • Offered in a 1/4, 3/8 or 1/2 wave spacing version
    • The 871A-70 has external cabling and a field-adjustable pattern.
    • The 871F-70 has internal cabling and fixed dipole-mast spacing.
    • Heavy-duty and black anodized versions available
      DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
  • Dual, Triple and Quad Feed Exposed Dipole Array

    Frequency Range: 138-174 MHz
    Gain: 2.0-2.5 dBd
    Dual, Triple, and Quad Feed Exposed Dipole Array The (2)871F-70, (3)871F-70, and (4)871F-70 are wide band multiple antennas designed for multicoupled systems. The antenna offers a choice of radiation patterns that are determined by the dipole-to-mast spacing. • These antennas have internal cabling and are not field adjustable. • Each antenna is offered in a 1/4, 3/8, or 1/2 wave pattern spacing versions. • Typical antenna to antenna isolation is 30dB, versions with 40 dB of isolation are also available. • Heavy duty versions are available. Please contact Comprod Inc. Technical support technician for consultation. DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
  • 872F-70 VHF Exposed Dipole

    Frequency Range: 138-174 MHz
    Gain: 5.0-5.5 dBd
    Adjustable, fixed, side or top mount antenna
    • Offered in a 1/4, 3/8 or 1/2 wave spacing version
    • The 872A-70 has external cabling and a field-adjustable pattern.
    • The 872F-70 has internal cabling and fixed dipole-mast spacing.
    • Heavy-duty and black anodized versions available
    DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
  • 874F-70 VHF Exposed Dipole

    874F-70 VHF Exposed Dipole

    Frequency Range: 138-174 MHz
    Gain: 8.0-8.5 dBd
    Adjustable, fixed, side or top mount antenna
    • Offered in a 1/4, 3/8 or 1/2 wave spacing version
    • The 874A-70 has external cabling and a field-adjustable pattern.
    • The 874F-70 has internal cabling and fixed dipole-mast spacing.
    • Heavy-duty and black anodized versions available
    DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
  • 201-70 Omnidirectional Antenna

    Frequency Range: 25-174 MHz
    Gain: Unity
    Very large bandwidth which make it ideal for emergency use or resale
    • Rugged design to withstand the most extreme environmental conditions
    • The mounting hardware supplied will permit 0.75” to 2.3/8” O.D. pipe installation.
    • DC ground for lightning protection
    DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
  • 265-70 Ground Plane Antenna

    265-70 Ground Plane Antenna

    Frequency Range: 118-174 MHz
    Gain: Unity
    Omnidirectional antenna for wide frequency band applications. Ideal for mounting on buildings
    • Available in VHF configuration (3 frequency splits)
    • Rugged design to withstand the most extreme environmental conditions.
    • The mounting hardware supplied will permit 0.75” to 2.38” O.D. pipe installation.
    • DC ground for lightning protection
    DOWNLOAD PDF DOWNLOAD DIGITAL PATTERN
  • 266-70 Ground Plane Antenna

    266-70 Ground Plane Antenna

    Frequency Range: 118-174 MHz
    Gain: 2-3 dBd
    Omnidirectional antenna for wide frequency band applications. Ideal for mounting on buildings
    • Available in VHF configuration (2 frequency splits)
    • Rugged design to withstand the most extreme environmental conditions.
    • The mounting hardware supplied will permit 0.75” to 2.38” O.D. pipe installation.
    • DC ground for lightning protection
    DOWNLOAD PDF DOWNLOAD DIGITAL PATTERN
  • 832-70 Light Duty VHF Exposed Dipole

    Frequency Range: 148-174 MHz
    Gain: 3.0 or 6.0 dBd
    Light duty VHF exposed dipole
    • Available in a VHF configuration (2 frequency splits)
    • Low VSWR version with maximum gain over specified frequency
    • External cabling and fixed dipole-mast spacing
    • Adjustable pattern for omnidirectional or offset coverage
    DOWNLOAD PDF  
  • 834-70 Light Duty VHF Exposed Dipole

    Frequency Range: 148-174 MHz
    Gain: 6.0 or 9.0 dBd
    Light duty VHF exposed dipole
    • Available in a VHF configuration (2 frequency splits)
    • Low VSWR version with maximum gain over specified frequency
    • External cabling and fixed dipole-mast spacing
    • Adjustable pattern for omnidirectional or offset coverage
    • The 834-70 antenna is shipped in two sections to be assembled on site.
      DOWNLOAD PDF