- Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
- Low noise figure, wide dynamic range
- Visual alarms and remote failure monitoring with Graphical User Interface
- FCC and IC certified
- FCC ID: WDM-BDA138174
- IC: 7755A-BDA138174
-
Designed and engineered to meet the fire protection codes (NFPA and IFC standards). Please, note that BDA138174 is a generic number. Actual order number will be assigned to a system design. Specific frequencies are required for this product design. -
Designed and engineered to meet the fire protection codes (NFPA and IFC standards). Please, note that BDA380512 is a generic number. Actual order number will be assigned to a system design. Specific frequencies are required for this product design.
- Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
- Low noise figure, wide dynamic range
- Visual alarms and remote failure monitoring with Graphical User Interface
- FCC and IC certified
- FCC ID: WDM-BDA380512
- IC: 7755A-BDA380512
-
Constructed from high strength, corrosion resistant aluminum alloy and stainless steel
- Available in VHF, UHF, 800/900 MHz configurations
- Rugged design to withstand harsh environmental conditions
- Circular polarization
- DC ground for lightning protection
-
Individually calibrated to ensure the best performance in a disguised appearance
- Two or three separate frequency segments in a given mobile band
- Cross-channel operation in two mobile bands with one antenna
- Alternative antennas will be recommended, where required (e.g. Euro-style, or universal mount traditional whip)
-
The F-3980 is a wide band dual antenna with an 871F-70 on the base and a 792-70 on the top. The antenna offers for the 871F-70 a choice of radiation patterns that are determined by the dipole-to-mast spacing. The F-3980 has an internal cabling and is not field adjustable. The 871F-70 antenna is offered in a ¼, 3/8, or ½ wave pattern spacing versions. SPEC Sheet
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building.
- Mounting on a ceiling or gyprock wall, without need of a ground plane
- An extra protection can be added to meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building.
- Designed to be installed on hard surfaces such as concrete or metal structures.
- A layer of Kydex 6200 of 0.3’’ thickness is added to meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building. The antenna’s main application includes usage for:
- Distributed Antenna Systems (DAS) for Public Safety
- LTE communication
- Cellular bands in multiple stories of a building
- Mounting on a ceiling or gyprock wall, without need of a ground plane
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building.
- Mounting on a ceiling or gyprock wall, without need of a ground plane
-
Broadband, ideal for point-to-point applications
- Available in VHF, UHF, 700/800/900 MHz configurations
- Good directivity, very high front-to-back ratio
- Performance is constant throughout the band
- Rugged design to withstand harsh environmental conditions
- Ultra-low VSWR ratings
- Vertical or horizontal polarization
- DC ground for lightning protection
- Heavy-duty versions available
-
Broadband, ideal for point-to-point applications
- Available in VHF, UHF, 700/800/900 MHz configurations
- Good directivity, very high front-to-back ratio
- Performance is constant throughout the band
- Rugged design to withstand harsh environmental conditions
- Ultra-low VSWR ratings
- Vertical or horizontal polarization
- DC ground for lightning protection
- Heavy-duty versions available
-
The 290 Series VHF Yagi antennas are available in 2, 3, and 6 element configurations. All of our antennas can be completely customized to your applications. Our antennas can be black anodized, vertically or horizontally polarized, and heavy-duty versions are available. This antenna is extended boom. A center mount model is also available. Rugged design to withstand harsh environmental conditions
- Vertical or horizontal polarization
- DC ground for lightning protection
- Black anodized and heavy-duty versions available
-
Ideal for applications where costs are calculated per antenna
- Available in many configurations
- VHF, UHF or 700/800/900 MHz antennas can be combined onto one mast
- Mix and match with our 770, 790 and 870 series antennas
- Can be configured for side or top mount
- Low VSWR version with maximum gain over the specified frequencies
- Heavy-duty versions available
-
Ideal for applications where costs are calculated per antenna
- Available in many configurations
- VHF, UHF or 700/800/900 MHz antennas can be combined onto one mast
- Mix and match with our 770, 790 and 870 series antennas
- Can be configured for side or top mount
- Low VSWR version with maximum gain over the specified frequencies
- Heavy-duty versions available
-
Ideal for applications where costs are calculated per antenna
- Available in many configurations
- VHF, UHF or 700/800/900 MHz antennas can be combined onto one mast
- Mix and match with our 770, 790 and 870 series antennas
- Can be configured for side or top mount
- Low VSWR version with maximum gain over the specified frequencies
- Heavy-duty versions available
-
Offered in Omnidirectional or Bi-directional versions
- Internal cabling, fixed dipole-mast spacing and adjustable pattern control
- Heavy-duty, black anodized and top mount only versions available
-
The F-33029D-SM-1/2 is is a Wide Band Antenna with Black Anodized boom and dipoles. It is specifically designed for trunked Multicoupler such as X-pass systems. The 1/2 Wavelength dipole to mast spacing offers a bidirectional radiation pattern. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-SM-1/2 has internal cabling design and is not field adjustable.
- 1/4 wavelength dipole-to-mast spacing is also available for the offset radiation pattern.
- 3/8 wavelength dipole-to-mast spacing is also available for a radiation pattern between the elliptic and the offset.
-
The F-33029D-SM-1/4 is is a Wide Band Antenna with Black Anodized boom and dipoles. It is specifically designed for trunked Multicoupler such as X-pass systems. The 1/4 Wavelength dipole to mast spacing offers an offset radiation pattern. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-SM-1/4 has internal cabling design and is not field adjustable.
- 1/2 wavelength dipole-to-mast spacing is also available for the bidirectional radiation pattern.
- 3/8 wavelength dipole-to-mast spacing is also available for a radiation pattern between the elliptic and the offset.
-
The F-33029D-SM-3/8 is is a Wide Band Antenna with Black Anodized boom and dipoles. It is specifically designed for trunked Multicoupler such as X-pass systems. The 3/8 Wavelength dipole to mast spacing offers a radiation pattern between the elliptic and the offset. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-SM-3/8 has internal cabling design and is not field adjustable.
- 1/4 wavelength dipole-to-mast spacing is also available for the offset radiation pattern.
- 1/2 wavelength dipole-to-mast spacing is also available for a bidirectional radiation pattern.
-
The F-33029D-TM-1/2 is is a Wideband Black Anodized Antenna. It is specifically designed for trunked Multicoupler such as X-pass systems. The 1/2 Wavelength dipole to mast spacing offers a bidirectional radiation pattern. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-TM-1/2 has internal cabling design and is not field adjustable.
- 1/4 wavelength dipole-to-mast spacing is also available for the offset radiation pattern.
- 3/8 wavelength dipole-to-mast spacing is also available for a radiation pattern between the elliptic and the offset.
-
The F-33029D-TM-1/4 is is a Wideband Black Anodized Antenna. It is specifically designed for trunked Multicoupler such as X-pass systems. The 1/4 Wavelength dipole to mast spacing offers an offset radiation pattern. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-TM-1/4 has internal cabling design and is not field adjustable.
- 1/2 wavelength dipole-to-mast spacing is also available for the bidirectional radiation pattern.
- 3/8 wavelength dipole-to-mast spacing is also available for a radiation pattern between the elliptic and the offset.
-
The F-33029D-TM-3/8 is is a Wideband Black Anodized Antenna. It is specifically designed for trunked Multicoupler such as X-pass systems. The 3/8 Wavelength dipole to mast spacing offers a radiation pattern between the elliptic and the offset. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-TM-3/8 has internal cabling design and is not field adjustable.
- 1/4 wavelength dipole-to-mast spacing is also available for the offset radiation pattern.
- 1/2 wavelength dipole-to-mast spacing is also available for a bidirectional radiation pattern.
-
The F-33030-D is a Wide Band Ultra Heavy Duty Omnidirectional Antenna specifically designed for trunked multicoupled and X-pass systems applications. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints.
- The F-33030-D has internal cabling design and is not field adjustable.
- Mast 4,5" (114.3 mm) O.D.
- Passive Intermodulation Specification is measured in the third order intermodulation products, using two 20 watts (+43 dBm) Carriers.
-
The F-33031-D is a Wide Band Heavy Duty Omnidirectional Antenna specifically designed for trunked multicoupled and X-pass systems applications. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints.
- The F-33031-D has internal cabling design and is not field adjustable.
- Mast 3,5" (88.9 mm) O.D.
- Passive Intermodulation Specification is measured in the third order intermodulation products, using two 20 watts (+43 dBm) Carriers.
-
Heavy-duty wide band dual dipole array well suited for multicoupled systems due to its wide bandwidth. Fully welded and black anodized design for use in extreme environmental conditions. The F-33068 has internal cabling and a fixed dipole to mast spacing. DOWNLOAD PDF
-
The F-3647-B is a wideband black anodized dual antenna with an 871F-70 on the base and a 771-70 on the top. The antenna offers for the 871F-70 & 771-70 a choice of radiation patterns that are determined by the dipole-to-mast spacing. The F-3647 has an internal cabling and is not field adjustable. The 871F-70 & 771-70 antenna is offered in a ¼, 3/8, or ½ wave pattern spacing versions. The antenna can be black anodized. Heavy Duty version of the antenna is also available. DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
-
The F-3647-HDBTM is a heavy duty wideband dual antenna with an 871F-70 on the base and a 771-70 on the top. The antenna offers for the 871F-70 & 771-70 a choice of radiation patterns that are determined by the dipole-to-mast spacing. The F-3647-HDBTM has an internal cabling and is not field adjustable. The 871F-70 & 771-70 antenna is offered in a ¼, 3/8, or ½ wave pattern spacing versions. The antenna can be black anodized. Heavy Duty version of the antenna is also available. DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
-
The (2) 881-70-HDWBTM is a dual 881-70 bidirectional antenna with two feed cables. This antenna is heavy-duty, black anodized, top mount, well suited for multi-coupled systems due to its wide bandwidth. Fully welded and black anodiezd design for use in extreme environmental conditions. It has internal cabling and a fixed dipole to mast spacing. DOWNLOAD PDF
-
Offered in omnidirectional or bi-directional versions
- Internal cabling, fixed dipole-mast spacing and adjustable pattern control
- Heavy-duty, black anodized and top mount only versions available
-
Ideal for applications where costs are calculated per antenna
- Available in many configurations
- VHF, UHF or 700/800/900 MHz antennas can be combined onto one mast
- Mix and match with our 770, 790, 840, 870 and 880 series antennas
- Can be configured for side or top mount
- Low VSWR version with maximum gain over specified frequency
- Certain versions of antennas have an adjustable pattern for 3 dBd omnidirectional or 6 dBd offset coverage
- Heavy-duty versions available
-
Ideal for state or country borders
- Offered in a 3/8 wave version
- Fully welded
- The reflectors provide more directivity and greater front-to-back ratios.
- The exposed dipoles have internal cabling and fixed dipole- mast spacing.
- Side or top mount, heavy-duty and black anodized versions available
-
Ideal for state or country borders
- Offered in a 3/8 wave version
- Fully welded
- The reflectors provide more directivity and greater front-to-back ratios.
- The exposed dipoles have internal cabling and fixed dipole- mast spacing.
- Side or top mount, heavy-duty and black anodized versions available
-
Ideal for state or country borders
- Offered in a 3/8 wave version
- Fully welded
- The reflectors provide more directivity and greater front-to-back ratios.
- The exposed dipoles have internal cabling and fixed dipole- mast spacing.
- Side or top mount, heavy-duty and black anodized versions available
-
Adjustable-only, side mount or top mount antenna
- External cabling and field adjustable pattern
- Heavy-duty and black anodized versions available
-
Adjustable-only, side mount or top mount antenna
- External cabling and field adjustable pattern
- Heavy-duty and black anodized versions available
-
Adjustable-only, side mount or top mount antenna
- External cabling and field adjustable pattern
- Heavy-duty and black anodized versions available
