- Available in single, dual, triple or additional units
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Adjustable loops: each cavity has a calibration index for easy field tuning
-
Designed for minimizing interference from adjacent channels and outside systems
-
Designed to minimize interference from adjacent channels and outside systems
- Available in single, dual or triple units
- Temperature compensated to ensure frequency stability
- High attenuation
- Adjustable loops: each cavity has a calibration index to reference insertion loss
-
Designed to pass a frequency band and reject a narrow band of frequencies
- Can reject frequencies on either the high or low side of the pass frequency
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference
-
Designed to reject one narrow band of frequencies, while letting all others pass in the operating band
- Can be cascaded or added to one another in order to sharpen the attenuation of the rejection curve
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Adjustable loops: each cavity has a calibration index
-
Ideal for high power, close frequency separation installations
- Designed for combining two frequencies that require extra isolation. Can also be used as efficient pre-selectors
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Adjustable loops
-
Ideal for compact high performance applications
- Designed for the combination of two frequencies that require extra isolation. Can also be used as efficient pre-selectors
- A six and an eight cavity configuration is also available for a higher level of isolation and selectivity
- Can be retuned in the field
-
Ideal for high power, close frequency separation installations
- Designed for combining two frequencies that require extra isolation. Can also be used as efficient pre-selectors
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Adjustable loops
-
Ideal for compact high performance applications
- Designed for the combination of two frequencies that require extra isolation. Can also be used as efficient pre-selectors
- An eight cavity configuration is also available for a higher level of isolation and selectivity
- Can be retuned in the field
-
Designed for quick and easy installations
- Designed for the combination of two frequencies requiring extra isolation. Can also be used as efficient pre-selectors
- Available in 4 or 6 cavity configurations
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Adjustable loops: each cavity has a calibration index for easy field tuning
-
Designed for quick and easy installations
- Designed for the combination of two frequencies requiring extra isolation. Can also be used as efficient pre-selectors
- Available in 4 or 6 cavity configurations
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Adjustable loops: each cavity has a calibration index for easy field tuning
-
Light duty VHF exposed dipole
- Available in a VHF configuration (2 frequency splits)
- Low VSWR version with maximum gain over specified frequency
- External cabling and fixed dipole-mast spacing
- Adjustable pattern for omnidirectional or offset coverage
-
Light duty VHF exposed dipole
- Available in a VHF configuration (2 frequency splits)
- Low VSWR version with maximum gain over specified frequency
- External cabling and fixed dipole-mast spacing
- Adjustable pattern for omnidirectional or offset coverage
- The 834-70 antenna is shipped in two sections to be assembled on site.
-
Adjustable-only, side mount or top mount antenna
- External cabling and field adjustable pattern
- Heavy-duty and black anodized versions available
-
Adjustable, fixed, side or top mount antenna
- Offered in a 1/4, 3/8 or 1/2 wave spacing version
- The 871A-70 has external cabling and a field-adjustable pattern.
- The 871F-70 has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
Adjustable-only, side mount or top mount antenna
- External cabling and field adjustable pattern
- Heavy-duty and black anodized versions available
-
Adjustable, fixed, side or top mount antenna
- Offered in a 1/4, 3/8 or 1/2 wave spacing version
- The 872A-70 has external cabling and a field-adjustable pattern.
- The 872F-70 has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
Adjustable-only, side mount or top mount antenna
- External cabling and field adjustable pattern
- Heavy-duty and black anodized versions available
-
Adjustable, fixed, side or top mount antenna
- Offered in a 1/4, 3/8 or 1/2 wave spacing version
- The 874A-70 has external cabling and a field-adjustable pattern.
- The 874F-70 has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
Ideal for applications where costs are calculated per antenna
- Available in many configurations
- VHF, UHF or 700/800/900 MHz antennas can be combined onto one mast
- Mix and match with our 770, 790, 840, 870 and 880 series antennas
- Can be configured for side or top mount
- Low VSWR version with maximum gain over specified frequency
- Certain versions of antennas have an adjustable pattern for 3 dBd omnidirectional or 6 dBd offset coverage
- Heavy-duty versions available
-
Offered in omnidirectional or bi-directional versions
- Internal cabling, fixed dipole-mast spacing and adjustable pattern control
- Heavy-duty, black anodized and top mount only versions available
-
Offered in Omnidirectional or Bi-directional versions
- Internal cabling, fixed dipole-mast spacing and adjustable pattern control
- Heavy-duty, black anodized and top mount only versions available
-
Designed and engineered to meet the fire protection codes (NFPA and IFC standards). Please, note that BDA138174 is a generic number. Actual order number will be assigned to a system design. Specific frequencies are required for this product design.
- Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
- Low noise figure, wide dynamic range
- Visual alarms and remote failure monitoring with Graphical User Interface
- FCC and IC certified
- FCC ID: WDM-BDA138174
- IC: 7755A-BDA138174
-
Designed and engineered to meet the fire protection codes (NFPA and IFC standards). Please, note that BDA380512 is a generic number. Actual order number will be assigned to a system design. Specific frequencies are required for this product design.
- Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
- Low noise figure, wide dynamic range
- Visual alarms and remote failure monitoring with Graphical User Interface
- FCC and IC certified
- FCC ID: WDM-BDA380512
- IC: 7755A-BDA380512
-
Constructed from high strength, corrosion resistant aluminum alloy and stainless steel
- Available in VHF, UHF, 800/900 MHz configurations
- Rugged design to withstand harsh environmental conditions
- Circular polarization
- DC ground for lightning protection
-
Dual, Triple, and Quad Feed Exposed Dipole Array The (2)871F-70, (3)871F-70, and (4)871F-70 are wide band multiple antennas designed for multicoupled systems. The antenna offers a choice of radiation patterns that are determined by the dipole-to-mast spacing. • These antennas have internal cabling and are not field adjustable. • Each antenna is offered in a 1/4, 3/8, or 1/2 wave pattern spacing versions. • Typical antenna to antenna isolation is 30dB, versions with 40 dB of isolation are also available. • Heavy duty versions are available. Please contact Comprod Inc. Technical support technician for consultation. DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
-
The F-33029D-SM-1/2 is is a Wide Band Antenna with Black Anodized boom and dipoles. It is specifically designed for trunked Multicoupler such as X-pass systems. The 1/2 Wavelength dipole to mast spacing offers a bidirectional radiation pattern. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-SM-1/2 has internal cabling design and is not field adjustable.
- 1/4 wavelength dipole-to-mast spacing is also available for the offset radiation pattern.
- 3/8 wavelength dipole-to-mast spacing is also available for a radiation pattern between the elliptic and the offset.
-
The F-33029D-SM-1/4 is is a Wide Band Antenna with Black Anodized boom and dipoles. It is specifically designed for trunked Multicoupler such as X-pass systems. The 1/4 Wavelength dipole to mast spacing offers an offset radiation pattern. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-SM-1/4 has internal cabling design and is not field adjustable.
- 1/2 wavelength dipole-to-mast spacing is also available for the bidirectional radiation pattern.
- 3/8 wavelength dipole-to-mast spacing is also available for a radiation pattern between the elliptic and the offset.
-
The F-33029D-SM-3/8 is is a Wide Band Antenna with Black Anodized boom and dipoles. It is specifically designed for trunked Multicoupler such as X-pass systems. The 3/8 Wavelength dipole to mast spacing offers a radiation pattern between the elliptic and the offset. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-SM-3/8 has internal cabling design and is not field adjustable.
- 1/4 wavelength dipole-to-mast spacing is also available for the offset radiation pattern.
- 1/2 wavelength dipole-to-mast spacing is also available for a bidirectional radiation pattern.
-
The F-33029D-TM-1/2 is is a Wideband Black Anodized Antenna. It is specifically designed for trunked Multicoupler such as X-pass systems. The 1/2 Wavelength dipole to mast spacing offers a bidirectional radiation pattern. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-TM-1/2 has internal cabling design and is not field adjustable.
- 1/4 wavelength dipole-to-mast spacing is also available for the offset radiation pattern.
- 3/8 wavelength dipole-to-mast spacing is also available for a radiation pattern between the elliptic and the offset.
-
The F-33029D-TM-1/4 is is a Wideband Black Anodized Antenna. It is specifically designed for trunked Multicoupler such as X-pass systems. The 1/4 Wavelength dipole to mast spacing offers an offset radiation pattern. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-TM-1/4 has internal cabling design and is not field adjustable.
- 1/2 wavelength dipole-to-mast spacing is also available for the bidirectional radiation pattern.
- 3/8 wavelength dipole-to-mast spacing is also available for a radiation pattern between the elliptic and the offset.
-
The F-33029D-TM-3/8 is is a Wideband Black Anodized Antenna. It is specifically designed for trunked Multicoupler such as X-pass systems. The 3/8 Wavelength dipole to mast spacing offers a radiation pattern between the elliptic and the offset. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-TM-3/8 has internal cabling design and is not field adjustable.
- 1/4 wavelength dipole-to-mast spacing is also available for the offset radiation pattern.
- 1/2 wavelength dipole-to-mast spacing is also available for a bidirectional radiation pattern.
-
The F-33030-D is a Wide Band Ultra Heavy Duty Omnidirectional Antenna specifically designed for trunked multicoupled and X-pass systems applications. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints.
- The F-33030-D has internal cabling design and is not field adjustable.
- Mast 4,5" (114.3 mm) O.D.
- Passive Intermodulation Specification is measured in the third order intermodulation products, using two 20 watts (+43 dBm) Carriers.
-
The F-33031-D is a Wide Band Heavy Duty Omnidirectional Antenna specifically designed for trunked multicoupled and X-pass systems applications. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints.
- The F-33031-D has internal cabling design and is not field adjustable.
- Mast 3,5" (88.9 mm) O.D.
- Passive Intermodulation Specification is measured in the third order intermodulation products, using two 20 watts (+43 dBm) Carriers.
-
- Frequency range of 138-174 MHz
- Unity gain achieved over its operating bandwidth
- Used for vehicles, such as ambulances, where vertical clearance is critical
- This antenna is ideal for a vehicle that enters areas with reduced headroom
- Combined with a matching circuit that is mounted inside the vehicle
- Each antenna assembly is individually calibrated on the roof of a vehicle
-
Individually calibrated to ensure the best performance in a disguised appearance
- Two or three separate frequency segments in a given mobile band
- Cross-channel operation in two mobile bands with one antenna
- Alternative antennas will be recommended, where required (e.g. Euro-style, or universal mount traditional whip)