- Can easily support 100 kHz Tx-Tx spacing or 75 kHz spacing while using 10” cavities
- Flexible design: from 1-21 channel capacity
- Expandable: 1 or more additional channels at a time; re-configurable equipment
- 215-300 MHz, 85 MHz of operating bandwidth
- Temperature compensation to ensure frequency stability
- High attenuation to minimize desense and interference
- Ultra-low insertion losses; low coupling and bridging losses
- Continuous high-power handling capability; 150 watts – 24/7
-
Incorporates expandability, close frequency spacing and some of the lowest insertion losses in the industry -
Incorporates expandability, close frequency spacing and some of the lowest insertion losses in the industry
- Can easily support 100 kHz Tx-Tx spacing or 75 kHz spacing while using 10” cavities
- Flexible design: from 1-21 channel capacity
- Expandable: 1 or more additional channels at a time; re-configurable equipment
- 215-300 MHz, 85 MHz of operating bandwidth
- Temperature compensation to ensure frequency stability
- High attenuation to minimize desense and interference
- Ultra-low insertion losses; low coupling and bridging losses
- Continuous high-power handling capability; 150 watts – 24/7
-
Ideal for combining multiple Rx frequencies onto the same antenna
- Available in 2, 4, 8, 12, 16 and 32 port configurations
- Simple and cost-effective design
- Standard 19” Rack Mount (RM) or cavity-mounted (CM) versions
- Each unit consists of a power splitter and an RF amplifier.
- Plug-in Power Supply (PS) optional
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building.
- Mounting on a ceiling or gyprock wall, without need of a ground plane
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building. The antenna’s main application includes usage for:
- Distributed Antenna Systems (DAS) for Public Safety
- LTE communication
- Cellular bands in multiple stories of a building
- Mounting on a ceiling or gyprock wall, without need of a ground plane
-
DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNThe F-33324 is a dual yagi array mounted in a back-to-back configuration. The antennas are welded and are supplied with phasing harness. All of our antennas can be completely customized to your particular applications. Our antennas can be Vertically or Horizontally Polarized.
- Each antenna has a rugged design to withstand harsh environmental conditions.
- The mounting hardware supplied will permit either vertical or horizontal polarization.
- Heavy duty versions are available.
- DC ground for lightning protection.
-
The 876F-70-2HBSP40DF1/2 Black Anodized Heavy Duty Dual Exposed Dipole is well suited for multicoupled RF system. It has an extremely rugged design for use in severe environmental conditions. It has internal cabling and a fix dipole-to-mast spacing. This antenna is a special version of the 876F-70 with increased spacing between the two antennas, giving an isolation of 40 dB. It’s heavy duty and Low PIM design. Our antennas can be configured for side mount or top mount. This antenna is configured for side mount. The 1/2 wave pattern spacing version offer bidirectional pattern with more than 5 dBd Gain at 220 MHz. The 1/4 wave and 3/8 wave versions of the antenna are also available. DOWNLOAD PDF
-
Adjustable, fixed, side or top mount antenna
- Offered in a 1/4, 3/8 or 1/2 wave spacing version
- The 874A-70-2 has external cabling and a field-adjustable pattern.
- The 874F-70-2 has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
Adjustable, fixed, side or top mount antenna
- Offered in a 1/4, 3/8 or 1/2 wave spacing version
- The 872A-70-2 has external cabling and a field-adjustable pattern.
- The 872F-70-2 has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
The 872/872F-70-2TM antenna is a wide band dual band antenna designed for multicoupled systems. The antenna covers the 138-174 MHz and 215-225 MHz band, and offers a choice of radiation patterns that are determined by the dipole-to-mast spacing. This antenna is very rugged. It has an internal cabling; it is not field adjustable. The 872/872F-70-2TM antenna is well suited for use in severe environmental conditions. The antenna is offered in a ¼, ⅜ or ½ wave pattern spacing versions. DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS FOR VHF band DOWNLOAD DIGITAL PATTERNS FOR 215-225 MHz
-
Adjustable, fixed, side or top mount antenna
- Offered in a 1/4, 3/8 or 1/2 wave spacing version
- The 871A-70-2 has external cabling and a field-adjustable pattern.
- The 871F-70-2 has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
Unity gain in a wideband design for heavy-duty service
- Manufactured using the best corrosion-resistant materials and finishes available
- Ultrasonically-welded brass insert and a gold-plated spring-loaded contact
- Shipped with a factory tuned whip cut to size based on the customer specified frequency range between 136 MHz and 960 MHz
- Standard Motorola NMO type mount providing an excellent moisture seal even when the antenna is removed
