- Can easily support 125 kHz Tx-Tx spacing or 75 kHz spacing while using 10” cavities
- Flexible design: from 1-21 channel capacity
- Expandable: 1 or more additional channels at a time; re-configurable equipment
- 380-512 MHz, 132 MHz of operating bandwidth
- Temperature compensation to ensure frequency stability
- High attenuation to minimize desense and interference
- Ultra-low insertion losses; low coupling and bridging losses
- Continuous high-power handling capability; 150 watts – 24/7
-
Incorporates expandability, close frequency spacing and some of the lowest insertion losses in the industry -
Incorporates expandability, close frequency spacing and some of the lowest insertion losses in the industry
- Can easily support 125 kHz Tx-Tx spacing or 75 kHz spacing while using 10” cavities
- Flexible design: from 1-21 channel capacity
- Expandable: 1 or more additional channels at a time; re-configurable equipment
- 380-512 MHz, 132 MHz of operating bandwidth
- Temperature compensation to ensure frequency stability
- High attenuation to minimize desense and interference
- Ultra-low insertion losses; low coupling and bridging losses
- Continuous high-power handling capability; 150 watts – 24/7
-
Ideal for combining multiple Rx frequencies onto the same antenna
- Available in 2, 4, 8, 12 , 16 and 32 port configurations
- Simple and cost-effective design
- Standard 19” Rack Mount (RM) or cavity-mounted (CM) versions
- Each unit consists of a power splitter and an RF amplifier.
- Plug-in Power Supply (PS) optional
-
Combines multiple receiver frequencies onto the same antenna
- A low noise amplifier provides gain across the frequency band
- Low noise figure and low intermodulation generation
- Features up to 16 ports (24 and 32 port versions are available)
- -30 dB signal sampler port that can also be used to inject a signal
-
Designed for easy installation, reducing coaxial runs, and in-building applications with multi-band antennas
- Allows multiple bands to share the same transmission lines
- Available in VHF, UHF and 800/900 MHz bands
- Can be Tower-Mounted (TM), Rack-Mounted (RM) or stand alone
-
Designed for easy installation, reducing coaxial runs, and in-building applications with multi-band antennas
- Allows multiple bands to share the same transmission lines
- Available in VHF, UHF and 800/900 MHz bands
- Can be Tower-Mounted (TM), Rack-Mounted (RM) or stand alone
-
Fully expandable and reconfigurable
- Features X-Pass, plug-and-play technology
- Designed to offer engineers and technicians many options when designing or upgrading a site
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building.
- Mounting on a ceiling or gyprock wall, without need of a ground plane
-
Produc short description before changes Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building. The antenna’s main application includes usage for:
- Distributed Antenna Systems (DAS) for Public Safety
- LTE communication
- Cellular bands in multiple stories of a building
- Mounting on a ceiling or gyprock wall, without need of a ground plane
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building.
- Designed to be installed on hard surfaces such as concrete or metal structures.
- A layer of Kydex 6200 of 0.3’’ thickness is added to meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building.
- Mounting on a ceiling or gyprock wall, without need of a ground plane
- An extra protection can be added to meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Designed for compact, close frequency installations. Ideal for very closely spaced frequency transmitters
- Ideal for intermodulation panels, providing extra protection with their second harmonic filters, when physical space is at a premium or is constrained, and for providing extra isolation between two very close transmitters
- High isolation: minimizes intermodulation products
- Low loss: maximizes system performance
- Continuous power:
- Physical size and materials used maximizes the performance across the operating band
-
Designed for compact, close frequency installations. Ideal for very closely spaced frequency transmitters
- Ideal for intermodulation panels, providing extra protection with their second harmonic filters, when physical space is at a premium or is constrained, and for providing extra isolation between two very close transmitters
- High isolation: minimizes intermodulation products
- Low loss: maximizes system performance
- Continuous power:
- Physical size and materials used maximizes the performance across the operating band
-
Designed for compact, close frequency installations. Ideal for very closely spaced frequency transmitters
- Ideal for intermodulation panels, providing extra protection with their second harmonic filters, when physical space is at a premium or is constrained, and for providing extra isolation between two very close transmitters
- High isolation: minimizes intermodulation products
- Low loss: maximizes system performance
- Continuous power:
- Physical size and materials used maximizes the performance across the operating band
-
Designed for compact, close frequency installations. Ideal for very closely spaced frequency transmitters
- Ideal for intermodulation panels, providing extra protection with their second harmonic filters, when physical space is at a premium or is constrained, and for providing extra isolation between two very close transmitters
- High isolation: minimizes intermodulation products
- Low loss: maximizes system performance
- Continuous power:
- Physical size and materials used maximizes the performance across the operating band
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Aluminium painted
-
The F-3980 is a wide band dual antenna with an 871F-70 on the base and a 792-70 on the top. The antenna offers for the 871F-70 a choice of radiation patterns that are determined by the dipole-to-mast spacing. The F-3980 has an internal cabling and is not field adjustable. The 871F-70 antenna is offered in a ¼, 3/8, or ½ wave pattern spacing versions. SPEC Sheet
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Multiple frequency bands
- Aluminum painted
-
Rugged design to withstand harsh environmental conditions
- Available in the UHF configuration (3 frequency splits)
- Available in 2, 3, 7 element and 70 MHz wideband configurations
- Vertical or horizontal polarization
- DC ground for lightning protection
- Fully welded for added durability
- Black anodized and heavy-duty versions available
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meets the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
- The F-3749B Antenna is available in custom colors for orders of 150 or more.
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
- The F-3749 Antenna is available in custom colors for orders of 150 or more.
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Designed for mounting on a concrete surface to meet full bandwidth specifications
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
- Flame resistant and self-extinguishing polycarbonate tubing is used for the radome
-
Ideal for applications where costs are calculated per antenna
- Available in many configurations
- VHF, UHF or 700/800/900 MHz antennas can be combined onto one mast
- Mix and match with our 770, 790 and 870 series antennas
- Can be configured for side or top mount
- Low VSWR version with maximum gain over the specified frequencies
- Heavy-duty versions available
-
Ideal for applications where costs are calculated per antenna
- Available in many configurations
- VHF, UHF or 700/800/900 MHz antennas can be combined onto one mast
- Mix and match with our 770, 790 and 870 series antennas
- Can be configured for side or top mount
- Low VSWR version with maximum gain over the specified frequencies
- Heavy-duty versions available
-
The F-3647 is a heavy duty wideband dual antenna with an 871F-70 on the base and a 771-70 on the top. The antenna offers for the 871F-70 & 771-70 a choice of radiation patterns that are determined by the dipole-to-mast spacing. The F-3647 has an internal cabling and is not field adjustable. The 871F-70 & 771-70 antenna is offered in a ¼, 3/8, or ½ wave pattern spacing versions. The antenna can be black anodized. Heavy Duty version of the antenna is also available. DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
-
The F-3647 is a wideband dual antenna with an 871F-70 on the base and a 771-70 on the top. The antenna offers for the 871F-70 & 771-70 a choice of radiation patterns that are determined by the dipole-to-mast spacing. The F-3647 has an internal cabling and is not field adjustable. The 871F-70 & 771-70 antenna is offered in a ¼, 3/8, or ½ wave pattern spacing versions. The antenna can be black anodized. Heavy Duty version of the antenna is also available. DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
-
Ideal for applications where costs are calculated per antenna
- Available in many configurations
- VHF, UHF or 700/800/900 MHz antennas can be combined onto one mast
- Mix and match with our 770, 790 and 870 series antennas
- Can be configured for side or top mount
- Low VSWR version with maximum gain over the specified frequencies
- Heavy-duty versions available
-
Constructed from high strength, corrosion resistant aluminum alloy and stainless steel
- Available in VHF, UHF, 800/900 MHz configurations
- Rugged design to withstand harsh environmental conditions
- Circular polarization
- DC ground for lightning protection
-
Offered in Omni or bi-directional versions
- Available in 2 and 4 dipole set configurations
- Complete internal cabling, fixed dipole-mast spacing, and adjustable pattern control
- Heavy-duty, black anodized and top mount configuration only versions available
-
DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNSOffered in Omni or bi-directional versions
- Available in 2 and 4 dipole set configurations
- Complete internal cabling, fixed dipole-mast spacing, and adjustable pattern control
- Heavy-duty, black anodized and top mount configuration only versions available
-
Adjustable or fixed, side mount or top mount antenna
- Available in 1, 2, 4, 8 and dual dipole configurations
- Offered in a 1/4, 3/8, or 1/2 wave versions
- Internal cabling and fixed dipole-mast spacing
- Heavy-duty and black anodized versions available
-
DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNSIdeal for applications where costs are calculated per antenna
- Available in many configurations
- VHF, UHF or 700/800/900 MHz antennas can be combined onto one mast
- Mix and match with our 770, 790, 840, 870 and 880 series antennas
- Can be configured for side or top mount
- Low VSWR version with maximum gain over specified frequency
- Certain versions of antennas have an adjustable pattern for 3 dBd omnidirectional or 6 dBd offset coverage
- Heavy-duty versions available
-
The 774-70-HDBWTM-1/4 is a Wide Band, Black Anodized, Heavy Duty Welded, UHF Antenna. It is an extremely rugged 4 dipole Antenna designed for multicoupled systems. All our antennas can be customized to your particular applications. Our antennas can be configured for side mount or top mount. This antenna is configured for top mount. The 774-70-HDBWTM-1/4 antenna has internal cabling and fixed dipole-mast spacing. The antenna has either 406-470 MHz or 450-512 MHz split.
- Low VSWR version with maximum gain over specified frequency.
- Heavy Duty and Black Anodized version.
- This antenna is 1/4 wavelength spacing version offering offset radiation pattern.
- Standard connector is N-Male and optional 7/16 DIN or 4.3-10 is also available.
-
The 774-70-HDBWTM-1/2 is a Wide Band, Black Anodized, Heavy Duty Welded, UHF Antenna. It is an extremely rugged 4 dipole Antenna designed for multicoupled systems. All our antennas can be customized to your particular applications. Our antennas can be configured for side mount or top mount. This antenna is configured for top mount. The 774-70-HDBWTM-1/2 antenna has internal cabling and fixed dipole-mast spacing. The antenna has either 406-470 MHz or 450-512 MHz split.
- Low VSWR version with maximum gain over specified frequency.
- Heavy Duty and Black Anodized version.
- This antenna is 1/2 wavelength spacing version offering bidirectional radiation pattern.
- Standard connector is N-Male and optional 7/16 DIN or 4.3-10 is also available.
-
Adjustable or fixed, side mount or top mount antenna
- Available in 1, 2, 4, 8 and dual dipole configurations
- Offered in a 1/4, 3/8, or 1/2 wave versions
- Internal cabling and fixed dipole-mast spacing
- Heavy-duty and black anodized versions available
