- Available in VHF configuration (3 frequency splits)
- Rugged design to withstand the most extreme environmental conditions.
- The mounting hardware supplied will permit 0.75” to 2.38” O.D. pipe installation.
- DC ground for lightning protection
Renowned for their superior performance, quality and reliability, Comprod’s antennas are designed to excel in the most hostile environments. Manufactured with the highest quality electrical and mechanical components, built with precision and strength, they feature sealed cable connections, crimped and soldered connectors, moisture-resistant wire harnesses and welded junctions which make them ideally suited for Mission-Critical applications. Our antennas can also be tailored to fit specific needs, based on unique RF network or product applications (e.g. : increased mast height for higher elevation mounting, customized mast separated into two sections for easier handling inside elevators, etc.).
KEY FEATURES AND OPTIONS:
• Heavy-duty – Oversized, hyper-strengthened and designed to exceed specifications
• Welded – Ideal for high winds and icing conditions
• Black Anodized – An electrically-plated protective coating particularly good for heavy icing and corrosive environments
• Cable Lengths – Usually 2 feet is standard but the feed line length can be adapted to your needs (up to 125ft.)
• Connectors – Type N is our usual standard connector, but this can be factory-altered as required
• Custom Mounting Configurations
• Custom Antennas
• Low PIM – Our new line of low PIM antennas dramatically reduces mechanical junctions. They also use double-shielded coaxial cable (multiple versions are available).
-
Omnidirectional antenna for wide frequency band applications. Ideal for mounting on buildings
-
Omnidirectional antenna for wide frequency band applications. Ideal for mounting on buildings
- Available in VHF configuration (2 frequency splits)
- Rugged design to withstand the most extreme environmental conditions.
- The mounting hardware supplied will permit 0.75” to 2.38” O.D. pipe installation.
- DC ground for lightning protection
-
Very large bandwidth which make it ideal for emergency use or resale
- Rugged design to withstand the most extreme environmental conditions
- The mounting hardware supplied will permit 0.75” to 2.3/8” O.D. pipe installation.
- DC ground for lightning protection
-
Adjustable, fixed, side or top mount antenna
- Offered in a 1/4, 3/8 or 1/2 wave spacing version
- The 871A-70 has external cabling and a field-adjustable pattern.
- The 871F-70 has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
Adjustable, fixed, side or top mount antenna
- Offered in a 1/4, 3/8 or 1/2 wave spacing version
- The 872A-70 has external cabling and a field-adjustable pattern.
- The 872F-70 has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
Adjustable, fixed, side or top mount antenna
- Offered in a 1/4, 3/8 or 1/2 wave spacing version
- The 874A-70 has external cabling and a field-adjustable pattern.
- The 874F-70 has internal cabling and fixed dipole-mast spacing.
- Heavy-duty and black anodized versions available
-
Adjustable-only, side mount or top mount antenna
- External cabling and field adjustable pattern
- Heavy-duty and black anodized versions available
-
Adjustable-only, side mount or top mount antenna
- External cabling and field adjustable pattern
- Heavy-duty and black anodized versions available
-
Adjustable-only, side mount or top mount antenna
- External cabling and field adjustable pattern
- Heavy-duty and black anodized versions available
-
Ideal for state or country borders
- Offered in a 3/8 wave version
- Fully welded
- The reflectors provide more directivity and greater front-to-back ratios.
- The exposed dipoles have internal cabling and fixed dipole- mast spacing.
- Side or top mount, heavy-duty and black anodized versions available
-
Ideal for state or country borders
- Offered in a 3/8 wave version
- Fully welded
- The reflectors provide more directivity and greater front-to-back ratios.
- The exposed dipoles have internal cabling and fixed dipole- mast spacing.
- Side or top mount, heavy-duty and black anodized versions available
-
Ideal for state or country borders
- Offered in a 3/8 wave version
- Fully welded
- The reflectors provide more directivity and greater front-to-back ratios.
- The exposed dipoles have internal cabling and fixed dipole- mast spacing.
- Side or top mount, heavy-duty and black anodized versions available
-
Ideal for applications where costs are calculated per antenna
- Available in many configurations
- VHF, UHF or 700/800/900 MHz antennas can be combined onto one mast
- Mix and match with our 770, 790, 840, 870 and 880 series antennas
- Can be configured for side or top mount
- Low VSWR version with maximum gain over specified frequency
- Certain versions of antennas have an adjustable pattern for 3 dBd omnidirectional or 6 dBd offset coverage
- Heavy-duty versions available
-
Offered in omnidirectional or bi-directional versions
- Internal cabling, fixed dipole-mast spacing and adjustable pattern control
- Heavy-duty, black anodized and top mount only versions available
-
Offered in Omnidirectional or Bi-directional versions
- Internal cabling, fixed dipole-mast spacing and adjustable pattern control
- Heavy-duty, black anodized and top mount only versions available
-
Ideal for applications where costs are calculated per antenna
- Available in many configurations
- VHF, UHF or 700/800/900 MHz antennas can be combined onto one mast
- Mix and match with our 770, 790 and 870 series antennas
- Can be configured for side or top mount
- Low VSWR version with maximum gain over the specified frequencies
- Heavy-duty versions available
-
Ideal for applications where costs are calculated per antenna
- Available in many configurations
- VHF, UHF or 700/800/900 MHz antennas can be combined onto one mast
- Mix and match with our 770, 790 and 870 series antennas
- Can be configured for side or top mount
- Low VSWR version with maximum gain over the specified frequencies
- Heavy-duty versions available
-
Ideal for applications where costs are calculated per antenna
- Available in many configurations
- VHF, UHF or 700/800/900 MHz antennas can be combined onto one mast
- Mix and match with our 770, 790 and 870 series antennas
- Can be configured for side or top mount
- Low VSWR version with maximum gain over the specified frequencies
- Heavy-duty versions available
-
The 290 Series VHF Yagi antennas are available in 2, 3, and 6 element configurations. All of our antennas can be completely customized to your applications. Our antennas can be black anodized, vertically or horizontally polarized, and heavy-duty versions are available. This antenna is extended boom. A center mount model is also available. Rugged design to withstand harsh environmental conditions
- Vertical or horizontal polarization
- DC ground for lightning protection
- Black anodized and heavy-duty versions available
-
Broadband, ideal for point-to-point applications
- Available in VHF, UHF, 700/800/900 MHz configurations
- Good directivity, very high front-to-back ratio
- Performance is constant throughout the band
- Rugged design to withstand harsh environmental conditions
- Ultra-low VSWR ratings
- Vertical or horizontal polarization
- DC ground for lightning protection
- Heavy-duty versions available
-
Broadband, ideal for point-to-point applications
- Available in VHF, UHF, 700/800/900 MHz configurations
- Good directivity, very high front-to-back ratio
- Performance is constant throughout the band
- Rugged design to withstand harsh environmental conditions
- Ultra-low VSWR ratings
- Vertical or horizontal polarization
- DC ground for lightning protection
- Heavy-duty versions available
-
Light duty VHF exposed dipole
- Available in a VHF configuration (2 frequency splits)
- Low VSWR version with maximum gain over specified frequency
- External cabling and fixed dipole-mast spacing
- Adjustable pattern for omnidirectional or offset coverage
-
Light duty VHF exposed dipole
- Available in a VHF configuration (2 frequency splits)
- Low VSWR version with maximum gain over specified frequency
- External cabling and fixed dipole-mast spacing
- Adjustable pattern for omnidirectional or offset coverage
- The 834-70 antenna is shipped in two sections to be assembled on site.
-
Constructed from high strength, corrosion resistant aluminum alloy and stainless steel
- Available in VHF, UHF, 800/900 MHz configurations
- Rugged design to withstand harsh environmental conditions
- Circular polarization
- DC ground for lightning protection