- Low insertion loss
- Lower PIM versions available with DIN 7/16 Connector
- Compact dimensions: 5.5 x 1.0 x 1.7 in.
- 5, 6, 10, 15, 20, 30 dB values
- Average power of 200 Watts
- Mounting bracket supplied
-
-
Omnidirectional antenna for wide frequency band applications. Ideal for mounting on buildings
- Available in UHF configuration (3 frequency splits)
- Rugged design to withstand the most extreme environmental conditions.
- The mounting hardware supplied will permit 0.75” to 2.38” O.D. pipe installation.
- DC ground for lightning protection
-
- Low insertion loss
- Lower PIM versions available with DIN 7/16 Connector
- 3 dB values
- Average power of 300 Watts
- Mounting bracket supplied
-
- Low insertion loss
- Lower PIM versions available with DIN 7/16 Connector
- 5 dB values
- Average power of 300 Watts
- Mounting bracket supplied
-
Very large bandwidth which make it ideal for emergency use or resale
- Available in UHF configuration (3 frequency splits)
- Rugged design to withstand the most extreme environmental conditions
- The mounting hardware supplied will permit 0.75” to 2.3/8” O.D. pipe installation.
- DC ground for lightning protection
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environmentsDOWNLOAD PDF INSTALLATION PDF
- Offered with Fire Retardant 6200 Kydex or ABS radomes
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Ideal for low clearance applications such as those found on trains, public transit vehicles, construction equipment and police vehicles
- Low-profile rugged alternative to a ¼-wave whip mobile antenna
- When mounted on a horizontal surface, maximum radiation is omnidirectional and vertically polarized
- Impact-resistant ABS radome
- Supplied with a mounting gasket to ensure a moisture-proof installation
-
DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNSBroadband, ideal for point-to-point applications
- Available in VHF, UHF, 700/800/900 MHz configurations
- Very high front-to-back ratio
- Highly directive parabolic antennas consisting of a back-firing dipole reflector assembly for increased gain and directivity.
- Performance is constant throughout the band
- Rugged design to withstand harsh environmental conditions
- Ultra-low VSWR ratings
- Vertical or horizontal polarization
- DC ground for lightning protection
- Heavy-duty versions available
-
DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNWide band, ideal for base station or in-building applications
- Available in UHF configuration (3 frequency splits)
- Very high front-to-back ratio
- Performance is constant throughout the band
- Rugged design to withstand harsh environmental conditions
- Vertical or horizontal polarization
- DC ground for lightning protection
-
DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNHeavy-duty versions, part of our “Avalanche Series
- Rugged design to withstand harsh environmental conditions
- Available in UHF configuration (3 frequency splits)
- Vertical or horizontal polarization
- DC ground for lightning protection
- The PVC enclosure is ½ inch-thick water main.
-
Heavy-duty versions, part of our “Avalanche Series
- Rugged design to withstand harsh environmental conditions
- Available in UHF configuration (3 frequency splits)
- Vertical or horizontal polarization
- DC ground for lightning protection
-
Broadband, ideal for point-to-point applications
- Available in VHF, UHF, 700/800/900 MHz configurations
- Good directivity, very high front-to-back ratio
- Performance is constant throughout the band
- Rugged design to withstand harsh environmental conditions
- Ultra-low VSWR ratings
- Vertical or horizontal polarization
- DC ground for lightning protection
- Heavy-duty versions available
-
Broadband, ideal for point-to-point applications
- Available in VHF, UHF, 700/800/900 MHz configurations
- Good directivity, very high front-to-back ratio
- Performance is constant throughout the band
- Rugged design to withstand harsh environmental conditions
- Ultra-low VSWR ratings
- Vertical or horizontal polarization
- DC ground for lightning protection
- Heavy-duty versions available
-
Broadband, ideal for point-to-point applications
- Available in VHF, UHF, 700/800/900 MHz configurations
- Good directivity, very high front-to-back ratio
- Performance is constant throughout the band
- Rugged design to withstand harsh environmental conditions
- Ultra-low VSWR ratings
- Vertical or horizontal polarization
- DC ground for lightning protection
- Heavy-duty versions available
-
Wide band, ideal for base station or in-building applications
- Very high front-to-back ratio
- Performance is constant throughout the band
- Rugged design to withstand harsh environmental conditions
- Vertical or horizontal polarization
- DC ground for lightning protection
-
Rugged design to withstand harsh environmental conditions
- Available in 2, 3, 7 element and 70 MHz wideband configurations
- Vertical or horizontal polarization
- DC ground for lightning protection
- Fully welded for added durability
- Black anodized and heavy-duty versions available
-
Bi-directional coupler, ideally suited for two-way communications systems
- Low insertion loss
- High isolation between ports
- Excellent VSWR
- Tri-band and other models are available and customizable.
-
Multilayer bonded PCB for high performance and compact design
- Low insertion loss
- Excellent return loss
- Compact dimensions saving space
- 3, 4.8, 6, 7, 10, 15, 20 and 30 dB values
- 200 Watts maximum main line power
- Integrated mounting bracket
-
Features compact size, low loss and temperature compensation over the range of -40ºC to +60ºC
- Extruded aluminum cavities and solid- shield copper-jacketed inter-cabling that ensures excellent mechanical and electrical stability
- All units are adjustable in the field and rated at 50 Watts maximum with a maximum VSWR of 1.5: 1 over the entire tuning range.
- BNC connectors are standard.
-
Features compact size, low loss and temperature compensation over the range of -40ºC to +60ºC
- Extruded aluminum cavities and solid- shield copper-jacketed inter-cabling that ensures excellent mechanical and electrical stability
- All units are adjustable in the field and rated at 50 watts continuous duty with a maximum VSWR of 1.5: 1 over the entire tuning range.
- BNC connectors are standard.
-
Designed for minimizing interference from adjacent channels and outside systems
- Available in single, dual, triple or additional units
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Adjustable loops: each cavity has a calibration index for easy field tuning
-
Designed for minimizing interference from adjacent channels and outside systems
- Available in single, dual, triple or additional units
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Adjustable loops: each cavity has a calibration index for easy field tuning
-
Designed for minimizing interference from adjacent channels and outside systems
- Available in single, dual, triple or additional units
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Adjustable loops: each cavity has a calibration index for easy field tuning
-
Designed to minimize interference from adjacent channels and outside systems
- Available in single, dual or triple units
- Temperature compensated to ensure frequency stability
- High attenuation
- Adjustable loops: each cavity has a calibration index to reference insertion loss
