- Mounting on a ceiling or gyprock wall, without need of a ground plane
- An extra protection can be added to meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building. -
Constructed from high strength, corrosion resistant aluminum alloy and stainless steel
- Available in VHF, UHF, 800/900 MHz configurations
- Rugged design to withstand harsh environmental conditions
- Circular polarization
- DC ground for lightning protection
-
Multilayer bonded PCB for high performance and compact design
- Low insertion loss
- Excellent return loss
- Compact dimensions saving space
- 3, 4.8, 6, 7, 10, 15, 20 and 30 dB values
- 200 Watts maximum main line power
- Integrated mounting bracket
-
Broadband, ideal for point-to-point applications
- Available in VHF, UHF, 700/800/900 MHz configurations
- Good directivity, very high front-to-back ratio
- Performance is constant throughout the band
- Rugged design to withstand harsh environmental conditions
- Ultra-low VSWR ratings
- Vertical or horizontal polarization
- DC ground for lightning protection
- Heavy-duty versions available
-
Bi-directional coupler, ideally suited for two-way communications systems
- Low insertion loss
- High isolation between ports
- Excellent VSWR
- Tri-band and other models are available and customizable.
-
Ideal for combining multiple Rx frequencies onto the same antenna
- Available in 2, 4, 8, 12 , 16 and 32 port configurations
- Simple and cost-effective design
- Standard 19” Rack Mount (RM) or cavity-mounted (CM) versions
- Each unit consists of a power splitter and an RF amplifier.
- Plug-in Power Supply (PS) optional
-
Incorporates expandability, close frequency spacing and some of the lowest insertion losses in the industry
- Can easily support 125 kHz Tx-Tx spacing or 75 kHz spacing while using 10” cavities
- Flexible design: from 1-21 channel capacity
- Expandable: 1 or more additional channels at a time; re-configurable equipment
- 380-512 MHz, 132 MHz of operating bandwidth
- Temperature compensation to ensure frequency stability
- High attenuation to minimize desense and interference
- Ultra-low insertion losses; low coupling and bridging losses
- Continuous high-power handling capability; 150 watts – 24/7
-
Incorporates expandability, close frequency spacing and some of the lowest insertion losses in the industry
- Can easily support 125 kHz Tx-Tx spacing or 75 kHz spacing while using 10” cavities
- Flexible design: from 1-21 channel capacity
- Expandable: 1 or more additional channels at a time; re-configurable equipment
- 380-512 MHz, 132 MHz of operating bandwidth
- Temperature compensation to ensure frequency stability
- High attenuation to minimize desense and interference
- Ultra-low insertion losses; low coupling and bridging losses
- Continuous high-power handling capability; 150 watts – 24/7
-
Features compact size, low loss and temperature compensation over the range of -40ºC to +60ºC
- Extruded aluminum cavities and solid- shield copper-jacketed inter-cabling that ensures excellent mechanical and electrical stability
- All units are adjustable in the field and rated at 50 watts continuous duty with a maximum VSWR of 1.5: 1 over the entire tuning range.
- BNC connectors are standard.
-
Features compact size, low loss and temperature compensation over the range of -40ºC to +60ºC
- Extruded aluminum cavities and solid- shield copper-jacketed inter-cabling that ensures excellent mechanical and electrical stability
- All units are adjustable in the field and rated at 50 Watts maximum with a maximum VSWR of 1.5: 1 over the entire tuning range.
- BNC connectors are standard.
-
Designed for minimizing interference from adjacent channels and outside systems
- Available in single, dual, triple or additional units
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Adjustable loops: each cavity has a calibration index for easy field tuning
-
Designed for minimizing interference from adjacent channels and outside systems
- Available in single, dual, triple or additional units
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Adjustable loops: each cavity has a calibration index for easy field tuning
-
Designed for minimizing interference from adjacent channels and outside systems
- Available in single, dual, triple or additional units
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Adjustable loops: each cavity has a calibration index for easy field tuning
-
Designed to reject one narrow band of frequencies, while letting all others pass in the operating band
- Can be cascaded or added to one another in order to sharpen the attenuation of the rejection curve
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Adjustable loops: each cavity has a calibration index
-
Designed to pass a frequency band and reject a narrow band of frequencies
- Can reject frequencies on either the high or low side of the pass frequency
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference
-
Designed to minimize interference from adjacent channels and outside systems
- Available in single, dual or triple units
- Temperature compensated to ensure frequency stability
- High attenuation
- Adjustable loops: each cavity has a calibration index to reference insertion loss
-
Wide band, ideal for base station or in-building applications
- Very high front-to-back ratio
- Performance is constant throughout the band
- Rugged design to withstand harsh environmental conditions
- Vertical or horizontal polarization
- DC ground for lightning protection
-
DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNWide band, ideal for base station or in-building applications
- Available in UHF configuration (3 frequency splits)
- Very high front-to-back ratio
- Performance is constant throughout the band
- Rugged design to withstand harsh environmental conditions
- Vertical or horizontal polarization
- DC ground for lightning protection
-
DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNSBroadband, ideal for point-to-point applications
- Available in VHF, UHF, 700/800/900 MHz configurations
- Very high front-to-back ratio
- Highly directive parabolic antennas consisting of a back-firing dipole reflector assembly for increased gain and directivity.
- Performance is constant throughout the band
- Rugged design to withstand harsh environmental conditions
- Ultra-low VSWR ratings
- Vertical or horizontal polarization
- DC ground for lightning protection
- Heavy-duty versions available
-
Broadband, ideal for point-to-point applications
- Available in VHF, UHF, 700/800/900 MHz configurations
- Good directivity, very high front-to-back ratio
- Performance is constant throughout the band
- Rugged design to withstand harsh environmental conditions
- Ultra-low VSWR ratings
- Vertical or horizontal polarization
- DC ground for lightning protection
- Heavy-duty versions available
-
Broadband, ideal for point-to-point applications
- Available in VHF, UHF, 700/800/900 MHz configurations
- Good directivity, very high front-to-back ratio
- Performance is constant throughout the band
- Rugged design to withstand harsh environmental conditions
- Ultra-low VSWR ratings
- Vertical or horizontal polarization
- DC ground for lightning protection
- Heavy-duty versions available
-
Heavy-duty versions, part of our “Avalanche Series
- Rugged design to withstand harsh environmental conditions
- Available in UHF configuration (3 frequency splits)
- Vertical or horizontal polarization
- DC ground for lightning protection
-
DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNHeavy-duty versions, part of our “Avalanche Series
- Rugged design to withstand harsh environmental conditions
- Available in UHF configuration (3 frequency splits)
- Vertical or horizontal polarization
- DC ground for lightning protection
- The PVC enclosure is ½ inch-thick water main.
-
Rugged design to withstand harsh environmental conditions
- Available in 2, 3, 7 element and 70 MHz wideband configurations
- Vertical or horizontal polarization
- DC ground for lightning protection
- Fully welded for added durability
- Black anodized and heavy-duty versions available
-
Rugged design to withstand harsh environmental conditions
- Available in the UHF configuration (3 frequency splits)
- Available in 2, 3, 7 element and 70 MHz wideband configurations
- Vertical or horizontal polarization
- DC ground for lightning protection
- Fully welded for added durability
- Black anodized and heavy-duty versions available
-
Ideal for applications where costs are calculated per antenna
- Available in many configurations
- VHF, UHF or 700/800/900 MHz antennas can be combined onto one mast
- Mix and match with our 770, 790 and 870 series antennas
- Can be configured for side or top mount
- Low VSWR version with maximum gain over the specified frequencies
- Heavy-duty versions available
-
Ideal for applications where costs are calculated per antenna
- Available in many configurations
- VHF, UHF or 700/800/900 MHz antennas can be combined onto one mast
- Mix and match with our 770, 790 and 870 series antennas
- Can be configured for side or top mount
- Low VSWR version with maximum gain over the specified frequencies
- Heavy-duty versions available
-
Ideal for applications where costs are calculated per antenna
- Available in many configurations
- VHF, UHF or 700/800/900 MHz antennas can be combined onto one mast
- Mix and match with our 770, 790 and 870 series antennas
- Can be configured for side or top mount
- Low VSWR version with maximum gain over the specified frequencies
- Heavy-duty versions available
-
Offered in Omni or bi-directional versions
- Available in 2 and 4 dipole set configurations
- Complete internal cabling, fixed dipole-mast spacing, and adjustable pattern control
- Heavy-duty, black anodized and top mount configuration only versions available
-
DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNSOffered in Omni or bi-directional versions
- Available in 2 and 4 dipole set configurations
- Complete internal cabling, fixed dipole-mast spacing, and adjustable pattern control
- Heavy-duty, black anodized and top mount configuration only versions available
-
Adjustable or fixed, side mount or top mount antenna
- Available in 1, 2, 4, 8 and dual dipole configurations
- Offered in a 1/4, 3/8, or 1/2 wave versions
- Internal cabling and fixed dipole-mast spacing
- Heavy-duty and black anodized versions available
-
Adjustable or fixed, side mount or top mount antenna
- Available in 1, 2, 4, 8 and dual dipole configurations
- Offered in a 1/4, 3/8, or 1/2 wave versions
- Internal cabling and fixed dipole-mast spacing
- Heavy-duty and black anodized versions available
-
Adjustable or fixed, side mount or top mount antenna
- Available in 1, 2, 4, 8 and dual dipole configurations
- Offered in a 1/4, 3/8, or 1/2 wave versions
- Internal cabling and fixed dipole-mast spacing
- Heavy-duty and black anodized versions available
-
Adjustable or fixed, side mount or top mount antenna
- Available in 1, 2, 4, 8 and dual dipole configurations
- Offered in a 1/4, 3/8, or 1/2 wave versions
- Internal cabling and fixed dipole-mast spacing
- Heavy-duty and black anodized versions available
-
DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNSIdeal for applications where costs are calculated per antenna
- Available in many configurations
- VHF, UHF or 700/800/900 MHz antennas can be combined onto one mast
- Mix and match with our 770, 790, 840, 870 and 880 series antennas
- Can be configured for side or top mount
- Low VSWR version with maximum gain over specified frequency
- Certain versions of antennas have an adjustable pattern for 3 dBd omnidirectional or 6 dBd offset coverage
- Heavy-duty versions available
-
Very large bandwidth which make it ideal for emergency use or resale
- Available in UHF configuration (3 frequency splits)
- Rugged design to withstand the most extreme environmental conditions
- The mounting hardware supplied will permit 0.75” to 2.3/8” O.D. pipe installation.
- DC ground for lightning protection
