- Can easily support 250 kHz Tx-Tx spacing
- Flexible design: from 1-21 channel capacity
- Expandable: 1 or more additional channels at a time; re-configurable equipment
- 746-1000 MHz, 254 MHz of operating bandwidth
- Temperature compensation to ensure frequency stability
- High attenuation to minimize desense and interference
- Ultra-low insertion losses; low coupling and bridging losses
- Continuous high-power handling capability; 150 watts – 24/7
-
Ideal for combining multiple Rx frequencies onto the same antenna
- Available in 2, 4, 8, 12, 16 and 32
- Simple and cost-effective design
- Standard 19” Rack Mount (RM) or cavity-mounted (CM) versions
- Each unit consists of a power splitter and an RF amplifier.
- Plug-in Power Supply (PS) optional
-
Ideal for combining multiple Rx frequencies onto the same antenna
- Available in 2, 4, 8, 12, 16 and 32
- Simple and cost-effective design
- Standard 19” Rack Mount (RM) or cavity-mounted (CM) versions
- Each unit consists of a power splitter and an RF amplifier.
- Plug-in Power Supply (PS) optional
-
Dielectric resonator technology resulting in higher performance than standard RF cavities in a much smaller package
- Available for the 764-776, 851-869 and 935-941 MHz bands
- Designed for tight channel spacing
- Lowest insertion loss, high isolation for maximum coverage and reduced interference
- Easy field expandability with X-Pass technology - one channel at a time
- Compact, robust design for rapid installations, increased mobility and ease of maintenance
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building.
- Mounting on a ceiling or gyprock wall, without need of a ground plane
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building. The antenna’s main application includes usage for:
- Distributed Antenna Systems (DAS) for Public Safety
- LTE communication
- Cellular bands in multiple stories of a building
- Mounting on a ceiling or gyprock wall, without need of a ground plane
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building.
- Designed to be installed on hard surfaces such as concrete or metal structures.
- A layer of Kydex 6200 of 0.3’’ thickness is added to meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building.
- Mounting on a ceiling or gyprock wall, without need of a ground plane
- An extra protection can be added to meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meets the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
- The F-3749B Antenna is available in custom colors for orders of 150 or more.
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
- The F-3749 Antenna is available in custom colors for orders of 150 or more.
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Designed for mounting on a concrete surface to meet full bandwidth specifications
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
- Flame resistant and self-extinguishing polycarbonate tubing is used for the radome
-
The Enclosed Dipoles with Black Anodized Reflector are available in 2-, 4-, or 8- dipole configurations. These antennas can be adjusted from 60º to 160º. All our antennas can be completely customized to your particular applications. • These antennas have 1/4 wave spacing to the reflector. • Broadband antennas are ideal for trunking or cellular applications. • Reflector is field adjustable and has 6 positions: 60º, 75º, 90º, 105º, 130º and 160º. • Weatherproof radome to ensure continuous service during severe environmental conditions. • Heavy-duty versions are available. Please, contact our Technical Support team for consultation. DOWNLOAD PDF
-
The Enclosed Dipoles with Black Anodized Reflector are available in 2-, 4-, or 8- dipole configurations. These antennas can be adjusted from 60º to 160º. All our antennas can be completely customized to your particular applications. • These antennas have 1/4 wave spacing to the reflector. • Broadband antennas are ideal for trunking or cellular applications. • Reflector is field adjustable and has 6 positions: 60º, 75º, 90º, 105º, 130º and 160º. • Weatherproof radome to ensure continuous service during severe environmental conditions. • Heavy-duty versions are available. Please, contact our Technical Support team for consultation. DOWNLOAD PDF
-
The Enclosed Dipoles with Black Anodized Reflector are available in 2-, 4-, or 8- dipole configurations. These antennas can be adjusted from 60º to 160º. All our antennas can be completely customized to your particular applications. • These antennas have 1/4 wave spacing to the reflector. • Broadband antennas are ideal for trunking or cellular applications. • Reflector is field adjustable and has 6 positions: 60º, 75º, 90º, 105º, 130º and 160º. • Weatherproof radome to ensure continuous service during severe environmental conditions. • Heavy-duty versions are available. Please, contact our Technical Support team for consultation. DOWNLOAD PDF
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Designed and engineered to meet the fire protection codes (NFPA and IFC standards)
- Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
- Low noise figure, wide dynamic range
- Visual alarms and remote failure monitoring with Graphical User Interface
- FCC and IC certified
- FCC ID: WDM-BDA896941
- IC: 7755A-BDA896941
-
Designed and engineered to meet the fire protection codes (NFPA and IFC standards)
- Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
- Low noise figure, wide dynamic range
- Visual alarms and remote failure monitoring with Graphical User Interface
- FCC and IC certified
- FCC ID: WDM-BDA806870
- IC: 7755A-BDA806870
-
Designed and engineered to meet the fire protection codes (NFPA and IFC standards)
- Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
- Low noise figure, wide dynamic range
- Visual alarms and remote failure monitoring with Graphical User Interface
- FCC and IC certified
- FCC ID: WDM-BDA764806
- IC: 7755A-BDA764806
-
Rugged design to withstand harsh environmental conditions
- Available in the 700/800/900 MHz configuration (4 frequency splits)
- Vertical or horizontal polarization
- Fully welded for added durability
- Black anodized versions available
-
Rugged design to withstand harsh environmental conditions
- Available in the 700/800/900 MHz configuration (4 frequency splits)
- Vertical or horizontal polarization
- Fully welded for added durability
- Black anodized versions available
-
Rugged design to withstand harsh environmental conditions
- Vertical or horizontal polarization
- Fully welded for added durability
- Black anodized versions available
-
Rugged design to withstand harsh environmental conditions
- Available in the 700/800/900 MHz configuration (5 frequency splits)
- Vertical or horizontal polarization
- Fully welded for added durability
- Black anodized version available
- Mounting hardware (127-85) supplied
- 980-70*5 is our dual band 700/800 MHz antenna: 764-870 MHz
-
Available in three frequency splits: 746-806; 806-869 or 885-960 within the 746 to 960 MHz range.
- Constructed with a high quality fiberglass light-grey radome
- Aluminum mounting hardware included with the antenna
-
Ideal for trunking or cellular applicationsDOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
- Available in the 700/800/900 MHz configuration (2 frequency splits)
- These antennas have 1/4 wave spacing to the reflector.
- Reflector is field-adjustable and has 5 positions: 60º, 90º, 105º, 130º and 160º
- Weatherproof radome to ensure continuous service during severe environmental conditions
- Heavy-duty versions available
-
Ideal for trunking or cellular applications
- This antenna is offered in an offset pattern, 1/4 wave versions.
- This antenna is also available in an offset pattern, 1/2 wave versions.
- Broadband antennas are ideal for trunking or cellular applications.
- Weatherproof radome to ensure continuous service during severe environmental conditions.
- Versions with 3, 6, and 9-degree downtilt are also available.
-
Ideal for trunking or cellular applications
- This antenna is offered in an offset pattern, 1/2 wave versions.
- This antenna is also available in an offset pattern, 1/4 wave versions.
- Broadband antennas are ideal for trunking or cellular applications.
- Weatherproof radome to ensure continuous service during severe environmental conditions.
- Versions with 3, 6, and 9-degree downtilt are also available.
-
Ideal for trunking or cellular applications
- This antenna is offered in an offset pattern, 1/4 wave versions.
- Each antenna is also available in an offset pattern, 1/2 wave versions.
- Broadband antennas are ideal for trunking or cellular applications.
- Weatherproof radome to ensure continuous service during severe environmental conditions.
- Versions with 3, 6, and 9-degree downtilt are also available.
-
Ideal for trunking or cellular applications
- This antenna is offered in an offset pattern, 1/2 wave versions.
- Each antenna is also available in an offset pattern, 1/4 wave versions.
- Broadband antennas are ideal for trunking or cellular applications.
- Weatherproof radome to ensure continuous service during severe environmental conditions.
- Versions with 3, 6, and 9-degree downtilt are also available.
-
Ideal for trunking or cellular applications
- This antenna is offered in an offset pattern, 1/4 wave versions.
- This antenna is also available in an offset pattern, 1/2 versions.
- Broadband antennas are ideal for trunking or cellular applications.
- Weatherproof radome to ensure continuous service during severe environmental conditions.
- Versions with 3, 6, and 9-degree downtilt are also available.
- This antenna is Low-PIM (-150 dBc; two 20W carriers).
-
Ideal for trunking or cellular applications
- This antenna is offered in an offset pattern, 1/2 wave versions.
- This antenna is also available in an offset pattern, 1/4 versions.
- Broadband antennas are ideal for trunking or cellular applications.
- Weatherproof radome to ensure continuous service during severe environmental conditions.
- Versions with 3, 6, and 9-degree downtilt are also available.
- This antenna is Low-PIM (-150 dBc; two 20W carriers).
-
Ideal for trunking or cellular applications
- Available in the 700/800/900 MHz configuration (2 frequency splits)
- These antennas have 1/4 wave spacing to the reflector.
- Reflector is field-adjustable and has 5 positions: 60º, 90º, 105º, 130º and 160º
- Weatherproof radome to ensure continuous service during severe environmental conditions
- Heavy-duty versions available
-
Ideal for trunking or cellular applications.
- This antenna is offered in an offset pattern, 1/4 wave versions.
- Each antenna is also available in an offset pattern, 1/2 wave versions.
- Broadband antennas are ideal for trunking or cellular applications.
- Weatherproof radome to ensure continuous service during severe environmental conditions.
- Versions with 3, 6, and 9-degree downtilt are also available.
-
Ideal for trunking or cellular applications.
- This antenna is offered in an offset pattern, 1/2 wave versions.
- Each antenna is also available in an offset pattern, 1/4 wave versions.
- Broadband antennas are ideal for trunking or cellular applications.
- Weatherproof radome to ensure continuous service during severe environmental conditions.
- Versions with 3, 6, and 9-degree downtilt are also available.
-
Ideal for trunking or cellular applications
- This antenna is offered in an offset pattern, 1/4 wave versions.
- Each antenna is also available in an offset pattern, 1/2 wave versions.
- Broadband antennas are ideal for trunking or cellular applications.
- Weatherproof radome to ensure continuous service during severe environmental conditions.
- Versions with 3, 6, and 9-degree downtilt are also available.