- Ideal for intermodulation panels, providing extra protection with their second harmonic filters, when physical space is at a premium or is constrained, and for providing extra isolation between two very close transmitters
- High isolation: minimizes intermodulation products
- Low loss: maximizes system performance
- Continuous power:
- Physical size and materials used maximizes the performance across the operating band
-
Designed for compact, close frequency installations. Ideal for very closely spaced frequency transmitters -
Designed for compact, close frequency installations. Ideal for very closely spaced frequency transmitters
- Ideal for intermodulation panels, providing extra protection with their second harmonic filters, when physical space is at a premium or is constrained, and for providing extra isolation between two very close transmitters
- High isolation: minimizes intermodulation products
- Low loss: maximizes system performance
- Continuous power:
- Physical size and materials used maximizes the performance across the operating band
-
Designed for compact, close frequency installations. Ideal for very closely spaced frequency transmitters
- Ideal for intermodulation panels, providing extra protection with their second harmonic filters, when physical space is at a premium or is constrained, and for providing extra isolation between two very close transmitters
- High isolation: minimizes intermodulation products
- Low loss: maximizes system performance
- Continuous power:
- Physical size and materials used maximizes the performance across the operating band
-
Designed for compact, close frequency installations. Ideal for very closely spaced frequency transmitters
- Ideal for intermodulation panels, providing extra protection with their second harmonic filters, when physical space is at a premium or is constrained, and for providing extra isolation between two very close transmitters
- High isolation: minimizes intermodulation products
- Low loss: maximizes system performance
- Continuous power:
- Physical size and materials used maximizes the performance across the operating band
-
Broadband, ideal for point-to-point applications where restrictions on beam width are present
- SRSP-507 Category A Compliant
- Very high front-to-back ratio
- Performance is constant throughout the band
- Mechanical resonance reducing design
- Rugged design to withstand harsh environmental conditions
- Highly-directive parabolic antenna consisting of a back-firing dipole reflector assembly for increased gain and directivity
- Ultra-low VSWR ratings
- Vertical or horizontal polarization
- DC ground for lightning protection
- Black anodized
-
Designed for compact, close frequency installations. Ideal for very closely spaced frequency transmitters
- Ideal for intermodulation panels, providing extra protection with their second harmonic filters, when physical space is at a premium or is constrained, and for providing extra isolation between two very close transmitters
- High isolation: minimizes intermodulation products
- Low loss: maximizes system performance
- Continuous power:
- Physical size and materials used maximizes the performance across the operating band
-
Designed for compact, close frequency installations. Ideal for very closely spaced frequency transmitters
- High isolation: minimizes intermodulation products
- Low loss: maximizes system performance
- Continuous power:
- Physical size and materials used maximizes the performance across the operating band
-
Designed for easy installation, reducing coaxial runs, and in-building applications with multi-band antennas
- Allows multiple bands to share the same transmission lines
- Available in VHF, UHF and 800/900 MHz bands
- Can be Tower-Mounted (TM), Rack-Mounted (RM) or stand alone
-
Broadband, ideal for point-to-point applications where restrictions on beam width are present
- SRSP-507 Category A Compliant
- Very high front-to-back ratio
- Performance is constant throughout the band
- Mechanical resonance reducing design
- Rugged design to withstand harsh environmental conditions
- Highly-directive parabolic antenna consisting of a back-firing dipole reflector assembly for increased gain and directivity
- Ultra-low VSWR ratings
- Vertical or horizontal polarization
- DC ground for lightning protection
- Black Anodized with a Radome
-
Designed for easy installation, reducing coaxial runs, and in-building applications with multi-band antennas
- Allows multiple bands to share the same transmission lines
- Available in VHF, UHF and 800/900 MHz bands
- Can be Tower-Mounted (TM), Rack-Mounted (RM) or stand alone
-
The Wide-band design series 26-13-0X-NF covers the range of 130-1000 MHz• Available in 2 way, 3-way or 4-way configuration. • 300 Watt power Handling • Airline design to achieve minimum insertion loss • Low PIM Available • Suitable for outdoor and indoor applications • RoHS 2.0 compliant DOWNLOAD PDF
-
- Low insertion loss
- Lower PIM versions available with DIN 7/16 Connector
- Compact dimensions: 5.5 x 1.0 x 1.7 in.
- 5, 6, 10, 15, 20, 30 dB values
- Average power of 200 Watts
- Mounting bracket supplied
-
- Low insertion loss
- Lower PIM versions available with DIN 7/16 Connector
- 5, 6, 10, 15, 20, 30 dB values
- Average power of 200 Watts
- Mounting bracket supplied
-
The Wide-band design series 26-13-0X-NF covers the range of 130-1000 MHz• Available in 2 way, 3-way or 4-way configuration. • 300 Watt power Handling • Airline design to achieve minimum insertion loss • Low PIM Available • Suitable for outdoor and indoor applications • RoHS 2.0 compliant DOWNLOAD PDF
-
- Low insertion loss
- Lower PIM versions available with DIN 7/16 Connector
- 3 dB values
- Average power of 300 Watts
- Mounting bracket supplied
-
- Low insertion loss
- Lower PIM versions available with DIN 7/16 Connector
- 5 dB values
- Average power of 300 Watts
- Mounting bracket supplied
-
We offer a full line of Power Splitters. The 47-02-XXN and 47-35-XXN series is a hybrid design which provides 20 dB or more of port-to-port isolation. They are typically used on receiver multicoupler applications. They provide low loss above the splitting loss and cover a very wide frequency range. N connectors are standard but other connectors are available. Standard finish is gold Alodine. DOWNLOAD PDF
-
Bi-directional coupler, ideally suited for two-way communications systems
- Low insertion loss
- High isolation between ports
- Excellent VSWR
- Tri-band and other models are available and customizable.
-
Multilayer bonded PCB for high performance and compact design
- Low insertion loss
- Excellent return loss
- Compact dimensions saving space
- 3, 4.8, 6, 7, 10, 15, 20 and 30 dB values
- 200 Watts maximum main line power
- Integrated mounting bracket
-
Multilayer bonded PCB for high performance and compact design
- Low insertion loss
- Excellent return loss
- Compact dimensions saving space
- 3, 4.8, 6, 7, 10, 15, 20 and 30 dB values
- 200 Watts maximum main line power
- Integrated mounting bracket
-
Dielectric resonator technology resulting in higher performance than standard RF cavities in a much smaller package
- Available for the 764-776, 851-869 and 935-941 MHz bands
- Designed for tight channel spacing
- Lowest insertion loss, high isolation for maximum coverage and reduced interference
- Easy field expandability with X-Pass technology - one channel at a time
- Compact, robust design for rapid installations, increased mobility and ease of maintenance
-
Dielectric resonator technology resulting in higher performance than standard RF cavities in a much smaller package
- Available for the 764-776, 851-869 and 935-941 MHz bands
- Designed for tight channel spacing
- Lowest insertion loss, high isolation for maximum coverage and reduced interference
- Star configuration
- Compact, robust design for rapid installations, increased mobility and ease of maintenance
-
Designed for minimizing interference from adjacent channels and outside systems
- Temperature-compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Silver-plated loops and tuning rods
-
Designed for minimizing interference from adjacent channels and outside systems
- Temperature-compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Silver-plated loops and tuning rods
-
Designed for minimizing interference from adjacent channels and outside systems
- Temperature-compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Silver-plated loops and tuning rods
-
High quality, high performance, utility-grade antenna
- Custom-designed
- Meets your specific needs
- Designed for any application as required by the customer
- Please contact a technical support technician for consultation.
-
Designed for minimizing interference from adjacent channels and outside systems
- Temperature-compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Silver-plated loops and tuning rods
-
Designed for minimizing interference from adjacent channels and outside systems
- Temperature-compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Silver-plated loops and tuning rods
-
Designed for flexible, space saving filter systems
- 4 types of racks:
- 19 inch standard racks
- X–racks
- Stack racks
- Wall-mount and cabinets
- 5 types of mounting hardware:
- Cabinet mount (CM)
- Wall mount (WM)
- Rack mount (RM)
- Tower mount (TM)
- Tray mount (TRM)
- Mounting hardware manufactured to your specifications available
- 4 types of racks:
-
Our standard offering of clamps has evolved over the last 40 years and is among the largest in the industry. We offer not only the standard clamp designs, but we offer many custom-designed examples for customers with unique installation requests. Most of our clamps are fabricated using hot-dipped galvanized high grade steel. They incorporate oversized U-bolts and fastening hardware. We also offer stainless steel versions as an alternative for use in extremely corrosive environments. DOWNLOAD PDF
-
Our standard offering of clamps has evolved over the last 40 years and is among the largest in the industry. We offer not only the standard clamp designs, but we offer many custom-designed examples for customers with unique installation requests. Most of our clamps are fabricated using hot-dipped galvanized high grade steel. They incorporate oversized U-bolts and fastening hardware. We also offer stainless steel versions as an alternative for use in extremely corrosive environments. DOWNLOAD PDF
-
Our standard offering of clamps has evolved over the last 40 years and is among the largest in the industry. We offer not only the standard clamp designs, but we offer many custom-designed examples for customers with unique installation requests. Most of our clamps are fabricated using hot-dipped galvanized high grade steel. They incorporate oversized U-bolts and fastening hardware. We also offer stainless steel versions as an alternative for use in extremely corrosive environments. DOWNLOAD PDF
-
Our standard offering of clamps has evolved over the last 40 years and is among the largest in the industry. We offer not only the standard clamp designs, but we offer many custom-designed examples for customers with unique installation requests. Most of our clamps are fabricated using hot-dipped galvanized high grade steel. They incorporate oversized U-bolts and fastening hardware. We also offer stainless steel versions as an alternative for use in extremely corrosive environments. DOWNLOAD PDF
-
Our standard offering of clamps has evolved over the last 40 years and is among the largest in the industry. We offer standard clamp designs as well as many custom-designed examples for customers with unique installation requests. Most of our clamps are fabricated using hot-dipped galvanized high grade steel. They incorporate oversized U-bolts and fastening hardware. We also offer stainless steel versions as an alternative for use in extremely corrosive environments. DOWNLOAD PDF
-
Our standard offering of clamps has evolved over the last 40 years and is among the largest in the industry. We offer standard clamp designs as well as many custom-designed examples for customers with unique installation requests. Most of our clamps are fabricated using hot-dipped galvanized high grade steel. They incorporate oversized U-bolts and fastening hardware. We also offer stainless steel versions as an alternative for use in extremely corrosive environments. DOWNLOAD PDF
-
Our standard offering of clamps has evolved over the last 40 years and is among the largest in the industry. We offer standard clamp designs as well as many custom-designed examples for customers with unique installation requests. Most of our clamps are fabricated using hot-dipped galvanized high grade steel. They incorporate oversized U-bolts and fastening hardware. We also offer stainless steel versions as an alternative for use in extremely corrosive environments. DOWNLOAD PDF
