The 876F-70-2HBSP40DF1/2 Black Anodized Heavy Duty Dual Exposed Dipole is well suited for multicoupled RF system. It has an extremely rugged design for use in severe environmental conditions. It has internal cabling and a fix dipole-to-mast spacing. This antenna is a special version of the 876F-70 with increased spacing between the two antennas, giving an isolation of 40 dB. It’s heavy duty and Low PIM design. Our antennas can be configured for side mount or top mount. This antenna is configured for side mount.
The 1/2 wave pattern spacing version offer bidirectional pattern with more than 5 dBd Gain at 220 MHz.
The 1/4 wave and 3/8 wave versions of the antenna are also available.
DOWNLOAD PDF
-
-
The 774-70-HDBWTM-1/4 is a Wide Band, Black Anodized, Heavy Duty Welded, UHF Antenna. It is an extremely rugged 4 dipole Antenna designed for multicoupled systems. All our antennas can be customized to your particular applications. Our antennas can be configured for side mount or top mount. This antenna is configured for top mount. The 774-70-HDBWTM-1/4 antenna has internal cabling and fixed dipole-mast spacing. The antenna has either 406-470 MHz or 450-512 MHz split.
- Low VSWR version with maximum gain over specified frequency.
- Heavy Duty and Black Anodized version.
- This antenna is 1/4 wavelength spacing version offering offset radiation pattern.
- Standard connector is N-Male and optional 7/16 DIN or 4.3-10 is also available.
-
- IP 66 rated
-
- IP 66 rated
-
- IP 66 rated
-
- IP 66 rated
-
This compact unidirectional (1 way) RF over Fiber (RFoF) transmitter is designed for conversion of RF signals to optical signals carried over long distances. The Tx unit using an optical transmitter, converts RF to Optical signal and the Rx unit converts back to RF signal. The two units are connected through customer’s single mode fiber.
- Noise Figure 6 dB with LNA with MDS ~-168 dB/Hz for very low incoming signals
- Impedance of 50 Ohm and 75 Ohm
- Gain variation S21 (fo) of ±1 dB for 90° C variation
- Better linearity,
- Excellent gain flatness
- Tx, Rx and Link gain control
- Real-time diagnostic of deployed links through GUI installed on the PC
-
This compact bidirectional (2 way) RF over Fiber (RFoF) transceiver is designed for Transmit/Receive antenna interfaces- applications where both an uplink as well as a downlink are required. The module employs WDM technology to use only 1 fiber link and supports 50-2500, 3000, 4000 and 6000 MHz. The RFoF link has excellent gain flatness and can be configured to have 0.5dB gain tracking between different links.
- Noise Figure 6 dB with LNA
- Impedance of 50 Ohm. 75 Ohm is optional with similar VSWR, by using SMA/BNC adaptor.
- Gain variation S21 (fo) of ±1 dB for 90° C variation
- Better linearity, excellent gain flatness, and Tx, Rx and Link gain control
- Real-time diagnostic of deployed links through GUI installed on the PC
- LNA ‘ON’ or ‘OFF’ is selected by the RFoF user software
-
- IP 66 rated
DOWNLOAD DIGITAL PATTERNS -
- IP 66 rated
DOWNLOAD DIGITAL PATTERNS -
- IP 66 rated
DOWNLOAD DIGITAL PATTERNS -
- IP 66 rated
-
- IP 66 rated
-
- IP 66 rated
7/16 DIN Female 7/16 DIN Male
DOWNLOAD DIGITAL PATTERNS -
- IP 66 rated
7/16 DIN Female 7/16 DIN Male
DOWNLOAD DIGITAL PATTERNS -
- IP 66 rated
-
- IP 66 rated
7/16 DIN Female 7/16 DIN Male
DOWNLOAD DIGITAL PATTERNS -
- IP 66 rated
-
- IP 66 rated
7/16 DIN Female 7/16 DIN Male
DOWNLOAD DIGITAL PATTERNS -
- IP 66 rated
7/16 DIN Female 7/16 DIN Male
DOWNLOAD DIGITAL PATTERNS -
- IP 66 rated
7/16 DIN Female 7/16 DIN Male DOWNLOAD DIGITAL PATTERNS -
- IP 66 rated
DOWNLOAD DIGITAL PATTERNS -
- IP 66 rated
-
- IP 66 rated
-
- IP 66 rated
-
- IP 66 rated
-
- IP 66 rated
-
- IP 66 rated
-
- IP 66 rated
-
- IP 66 rated
-
- IP 66 rated
-
- IP 66 rated
-
- IP 66 rated
-
- IP 66 rated
- Electrical downtilt options: 1-10 degrees
-
- IP 66 rated
- Electrical downtilt options: 1-10 degrees
-
- IP 66 rated
- Electrical downtilt options: 1-10 degrees