Products

  • Our 2" base station duplexers are ideal for compact high isolation installations. These filters are designed for the combination of two frequencies that require extra isolation, or they can be used as efficient preselectors. Selectivity can be determined by the field adjustable capacitors. Each cavity is temperature compensated for operation between -40ºC to +60 ºC. Each cavity has a gold Alodine finish, silver-plated loops, and silver-plated tuning rods.
    • Temperature Compensation
      • Ensures Frequency Stability
    • High Attenuation
      • Minimizes desense and interference from adjacent systems
    DOWNLOAD PDF
  • F-33329 Flexible Antenna

    Frequency Range: 138-174 MHz
    Gain: Unity
    • Frequency range of 138-174 MHz
    • Unity gain achieved over its operating bandwidth
    • Used for vehicles, such as ambulances, where vertical clearance is critical
    • This antenna is ideal for a vehicle that enters areas with reduced headroom
    • Combined with a matching circuit that is mounted inside the vehicle
    • Each antenna assembly is individually calibrated on the roof of a vehicle
    DOWNLOAD PDF
  • Heavy-duty wide band dual dipole array well suited for multicoupled systems due to its wide bandwidth. Fully welded and black anodized design for use in extreme environmental conditions. The F-33068 has internal cabling and a fixed dipole to mast spacing. DOWNLOAD PDF  
  • F-33048-A Multi-Band Antenna

    Frequency Range: 760-960 MHz
    Gain: Unity
    Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
    • Offered with Fire Retardant 6200 Kydex
    • Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
    DOWNLOAD PDF
  • F-33048 Multi-Band Antenna

    Frequency Range: 760-960 MHz
    Gain: Unity
    Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
    • Offered with Fire Retardant 6200 Kydex
    • Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
    DOWNLOAD PDF
  • F-33031-D Wideband Heavy Duty Omnidirectional Antenna

    Frequency Range: 138-174 MHz
    Gain: 6.0 dBd
    The F-33031-D is a Wide Band Heavy Duty Omnidirectional Antenna specifically designed for trunked multicoupled and X-pass systems applications. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints.
    • The F-33031-D has internal cabling design and is not field adjustable.
    • Mast 3,5" (88.9 mm) O.D.
    • Passive Intermodulation Specification is measured in the third order intermodulation products, using two 20 watts (+43 dBm) Carriers.
    DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
  • F-33030-D Wideband Ultra Heavy Duty Omni Antenna

    Frequency Range: 138-174 MHz
    Gain: 6.0 dBd
    The F-33030-D is a Wide Band Ultra Heavy Duty Omnidirectional Antenna specifically designed for trunked multicoupled and X-pass systems applications. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints.
    • The F-33030-D has internal cabling design and is not field adjustable.
    • Mast 4,5" (114.3 mm) O.D.
    • Passive Intermodulation Specification is measured in the third order intermodulation products, using two 20 watts (+43 dBm) Carriers.
    DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
  • F-33029D-TM-3/8 Wideband Black Anodized Antenna

    Frequency Range: 138-174 MHz
    Gain: 8.0 - 8.5 dBd
    The F-33029D-TM-3/8 is is a Wideband Black Anodized Antenna. It is specifically designed for trunked Multicoupler such as X-pass systems. The 3/8 Wavelength dipole to mast spacing offers a radiation pattern between the elliptic and the offset. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-TM-3/8 has internal cabling design and is not field adjustable.
    • 1/4 wavelength dipole-to-mast spacing is also available for the offset radiation pattern.
    • 1/2 wavelength dipole-to-mast spacing is also available for a bidirectional radiation pattern.
    DOWNLOAD PDF  
  • F-33029D-TM-1/4 Wideband Black Anodized Antenna

    Frequency Range: 138-174 MHz
    Gain: 8.0 - 8.5 dBd
    The F-33029D-TM-1/4 is is a Wideband Black Anodized Antenna. It is specifically designed for trunked Multicoupler such as X-pass systems. The 1/4 Wavelength dipole to mast spacing offers an offset radiation pattern. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-TM-1/4 has internal cabling design and is not field adjustable.
    • 1/2 wavelength dipole-to-mast spacing is also available for the bidirectional radiation pattern.
    • 3/8 wavelength dipole-to-mast spacing is also available for a radiation pattern between the elliptic and the offset.
    DOWNLOAD PDF  
  • F-33029D-TM-1/2 Wideband Black Anodized Antenna

    Frequency Range: 138-174 MHz
    Gain: 8.0 - 8.5 dBd
    The F-33029D-TM-1/2 is is a Wideband Black Anodized Antenna. It is specifically designed for trunked Multicoupler such as X-pass systems. The 1/2 Wavelength dipole to mast spacing offers a bidirectional radiation pattern. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-TM-1/2 has internal cabling design and is not field adjustable.
    • 1/4 wavelength dipole-to-mast spacing is also available for the offset radiation pattern.
    • 3/8 wavelength dipole-to-mast spacing is also available for a radiation pattern between the elliptic and the offset.
    DOWNLOAD PDF  
  • F-33029D-SM-3/8 Wideband Antenna with Black Anodized Boom and Dipoles

    Frequency Range: 138-174 MHz
    Gain: 8.0 - 8.5 dBd
    The F-33029D-SM-3/8 is is a Wide Band Antenna with Black Anodized boom and dipoles. It is specifically designed for trunked Multicoupler such as X-pass systems. The 3/8 Wavelength dipole to mast spacing offers a radiation pattern between the elliptic and the offset. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-SM-3/8 has internal cabling design and is not field adjustable.
    • 1/4 wavelength dipole-to-mast spacing is also available for the offset radiation pattern.
    • 1/2 wavelength dipole-to-mast spacing is also available for a bidirectional radiation pattern.
    DOWNLOAD PDF  
  • F-33029D-SM-1/4 Wideband Antenna with Black Anodized Boom and Dipoles

    Frequency Range: 138-174 MHz
    Gain: 8.0 - 8.5 dBd
    The F-33029D-SM-1/4 is is a Wide Band Antenna with Black Anodized boom and dipoles. It is specifically designed for trunked Multicoupler such as X-pass systems. The 1/4 Wavelength dipole to mast spacing offers an offset radiation pattern. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-SM-1/4 has internal cabling design and is not field adjustable.
    • 1/2 wavelength dipole-to-mast spacing is also available for the bidirectional radiation pattern.
    • 3/8 wavelength dipole-to-mast spacing is also available for a radiation pattern between the elliptic and the offset.
    DOWNLOAD PDF