-
The F-3980 is a wide band dual antenna with an 871F-70 on the base and a 792-70 on the top. The antenna offers for the 871F-70 a choice of radiation patterns that are determined by the dipole-to-mast spacing. The F-3980 has an internal cabling and is not field adjustable. The 871F-70 antenna is offered in a ¼, 3/8, or ½ wave pattern spacing versions. SPEC Sheet -
Ideal for compact high performance applications
- Designed for the combination of two frequencies that require extra isolation. Can also be used as efficient pre-selectors
- An eight cavity configuration is also available for a higher level of isolation and selectivity
- Can be retuned in the field
-
Designed and engineered to meet the fire protection codes (NFPA and IFC standards). Please, note that BDA380512 is a generic number. Actual order number will be assigned to a system design. Specific frequencies are required for this product design.
- Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
- Low noise figure, wide dynamic range
- Visual alarms and remote failure monitoring with Graphical User Interface
- FCC and IC certified
- FCC ID: WDM-BDA380512
- IC: 7755A-BDA380512
-
Designed and engineered to meet the fire protection codes (NFPA and IFC standards). Please, note that BDA138174 is a generic number. Actual order number will be assigned to a system design. Specific frequencies are required for this product design.
- Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
- Low noise figure, wide dynamic range
- Visual alarms and remote failure monitoring with Graphical User Interface
- FCC and IC certified
- FCC ID: WDM-BDA138174
- IC: 7755A-BDA138174
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building.
- Mounting on a ceiling or gyprock wall, without need of a ground plane
- An extra protection can be added to meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
- Frequency range of 138-174 MHz
- Unity gain achieved over its operating bandwidth
- Used for vehicles, such as ambulances, where vertical clearance is critical
- This antenna is ideal for a vehicle that enters areas with reduced headroom
- Combined with a matching circuit that is mounted inside the vehicle
- Each antenna assembly is individually calibrated on the roof of a vehicle
-
Constructed from high strength, corrosion resistant aluminum alloy and stainless steel
- Available in VHF, UHF, 800/900 MHz configurations
- Rugged design to withstand harsh environmental conditions
- Circular polarization
- DC ground for lightning protection
-
- Gain of unity over its operating bandwidth
- Manufactured using the best corrosion-resistant materials and finishes available
- Triple-plated chrome brass with a large insert molded low-loss coil form and spring-loaded, gold-plated contact
- Rubber boot to ensure a moisture-proof installation
- Standard TAD / NMO type mount
-
Designed for quick and easy installations
- Designed for the combination of two frequencies requiring extra isolation. Can also be used as efficient pre-selectors
- Available in 4 or 6 cavity configurations
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Adjustable loops: each cavity has a calibration index for easy field tuning
-
Individually calibrated to ensure the best performance in a disguised appearance
- Two or three separate frequency segments in a given mobile band
- Cross-channel operation in two mobile bands with one antenna
- Alternative antennas will be recommended, where required (e.g. Euro-style, or universal mount traditional whip)
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meets the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
- The F-3749B Antenna is available in custom colors for orders of 150 or more.
-
Ideal for compact high performance applications
- Designed for the combination of two frequencies that require extra isolation. Can also be used as efficient pre-selectors
- A six and an eight cavity configuration is also available for a higher level of isolation and selectivity
- Can be retuned in the field
