- Can easily support 250 kHz Tx-Tx spacing
- Flexible design: from 1-21 channel capacity
- Expandable: 1 or more additional channels at a time; re-configurable equipment
- 746-1000 MHz, 254 MHz of operating bandwidth
- Temperature compensation to ensure frequency stability
- High attenuation to minimize desense and interference
- Ultra-low insertion losses; low coupling and bridging losses
- Continuous high-power handling capability; 150 watts – 24/7
-
Incorporates expandability, close frequency spacing and some of the lowest insertion losses in the industry -
Ideal for combining multiple Rx frequencies onto the same antenna
- Available in 2, 4, 8, 12, 16 and 32
- Simple and cost-effective design
- Standard 19” Rack Mount (RM) or cavity-mounted (CM) versions
- Each unit consists of a power splitter and an RF amplifier.
- Plug-in Power Supply (PS) optional
-
Ideal for combining multiple Rx frequencies onto the same antenna
- Available in 2, 4, 8, 12, 16 and 32
- Simple and cost-effective design
- Standard 19” Rack Mount (RM) or cavity-mounted (CM) versions
- Each unit consists of a power splitter and an RF amplifier.
- Plug-in Power Supply (PS) optional
-
Combines multiple receiver frequencies onto the same antenna
- A low noise amplifier provides gain across the frequency band
- Low noise figure and low intermodulation generation
- Features up to 16 ports (24 and 32 port versions are available)
- -30 dB signal sampler port that can also be used to inject a signal
-
Designed for easy installation, reducing coaxial runs, and in-building applications with multi-band antennas
- Allows multiple bands to share the same transmission lines
- Available in VHF, UHF and 800/900 MHz bands
- Can be Tower-Mounted (TM), Rack-Mounted (RM) or stand alone
-
Designed for easy installation, reducing coaxial runs, and in-building applications with multi-band antennas
- Allows multiple bands to share the same transmission lines
- Available in VHF, UHF and 800/900 MHz bands
- Can be Tower-Mounted (TM), Rack-Mounted (RM) or stand alone
-
Fully expandable and reconfigurable
- Features X-Pass, plug-and-play technology
- Designed to offer engineers and technicians many options when designing or upgrading a site
-
Dielectric resonator technology resulting in higher performance than standard RF cavities in a much smaller package
- Available for the 764-776, 851-869 and 935-941 MHz bands
- Designed for tight channel spacing
- Lowest insertion loss, high isolation for maximum coverage and reduced interference
- Easy field expandability with X-Pass technology - one channel at a time
- Compact, robust design for rapid installations, increased mobility and ease of maintenance
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building.
- Mounting on a ceiling or gyprock wall, without need of a ground plane
-
Produc short description before changes Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building. The antenna’s main application includes usage for:
- Distributed Antenna Systems (DAS) for Public Safety
- LTE communication
- Cellular bands in multiple stories of a building
- Mounting on a ceiling or gyprock wall, without need of a ground plane
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building.
- Designed to be installed on hard surfaces such as concrete or metal structures.
- A layer of Kydex 6200 of 0.3’’ thickness is added to meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building.
- Mounting on a ceiling or gyprock wall, without need of a ground plane
- An extra protection can be added to meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Dielectric resonator technology resulting in higher performance than standard RF cavities in a much smaller package
- Available for the 764-776, 851-869 and 935-941 MHz bands
- Designed for tight channel spacing
- Lowest insertion loss, high isolation for maximum coverage and reduced interference
- Star configuration
- Compact, robust design for rapid installations, increased mobility and ease of maintenance
-
Designed for compact, close frequency installations. Ideal for very closely spaced frequency transmitters
- High isolation: minimizes intermodulation products
- Low loss: maximizes system performance
- Continuous power:
- Physical size and materials used maximizes the performance across the operating band
-
Designed for compact, close frequency installations. Ideal for very closely spaced frequency transmitters
- Ideal for intermodulation panels, providing extra protection with their second harmonic filters, when physical space is at a premium or is constrained, and for providing extra isolation between two very close transmitters
- High isolation: minimizes intermodulation products
- Low loss: maximizes system performance
- Continuous power:
- Physical size and materials used maximizes the performance across the operating band
-
Designed for compact, close frequency installations. Ideal for very closely spaced frequency transmitters
- Ideal for intermodulation panels, providing extra protection with their second harmonic filters, when physical space is at a premium or is constrained, and for providing extra isolation between two very close transmitters
- High isolation: minimizes intermodulation products
- Low loss: maximizes system performance
- Continuous power:
- Physical size and materials used maximizes the performance across the operating band
-
Designed for compact, close frequency installations. Ideal for very closely spaced frequency transmitters
- Ideal for intermodulation panels, providing extra protection with their second harmonic filters, when physical space is at a premium or is constrained, and for providing extra isolation between two very close transmitters
- High isolation: minimizes intermodulation products
- Low loss: maximizes system performance
- Continuous power:
- Physical size and materials used maximizes the performance across the operating band
-
Designed for compact, close frequency installations. Ideal for very closely spaced frequency transmitters
- Ideal for intermodulation panels, providing extra protection with their second harmonic filters, when physical space is at a premium or is constrained, and for providing extra isolation between two very close transmitters
- High isolation: minimizes intermodulation products
- Low loss: maximizes system performance
- Continuous power:
- Physical size and materials used maximizes the performance across the operating band
-
The F-3980 is a wide band dual antenna with an 871F-70 on the base and a 792-70 on the top. The antenna offers for the 871F-70 a choice of radiation patterns that are determined by the dipole-to-mast spacing. The F-3980 has an internal cabling and is not field adjustable. The 871F-70 antenna is offered in a ¼, 3/8, or ½ wave pattern spacing versions. SPEC Sheet
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meets the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
- The F-3749B Antenna is available in custom colors for orders of 150 or more.
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
- The F-3749 Antenna is available in custom colors for orders of 150 or more.
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Designed for mounting on a concrete surface to meet full bandwidth specifications
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
- Flame resistant and self-extinguishing polycarbonate tubing is used for the radome
-
The Enclosed Dipoles with Black Anodized Reflector are available in 2-, 4-, or 8- dipole configurations. These antennas can be adjusted from 60º to 160º. All our antennas can be completely customized to your particular applications. • These antennas have 1/4 wave spacing to the reflector. • Broadband antennas are ideal for trunking or cellular applications. • Reflector is field adjustable and has 6 positions: 60º, 75º, 90º, 105º, 130º and 160º. • Weatherproof radome to ensure continuous service during severe environmental conditions. • Heavy-duty versions are available. Please, contact our Technical Support team for consultation. DOWNLOAD PDF
-
The Enclosed Dipoles with Black Anodized Reflector are available in 2-, 4-, or 8- dipole configurations. These antennas can be adjusted from 60º to 160º. All our antennas can be completely customized to your particular applications. • These antennas have 1/4 wave spacing to the reflector. • Broadband antennas are ideal for trunking or cellular applications. • Reflector is field adjustable and has 6 positions: 60º, 75º, 90º, 105º, 130º and 160º. • Weatherproof radome to ensure continuous service during severe environmental conditions. • Heavy-duty versions are available. Please, contact our Technical Support team for consultation. DOWNLOAD PDF
-
The Enclosed Dipoles with Black Anodized Reflector are available in 2-, 4-, or 8- dipole configurations. These antennas can be adjusted from 60º to 160º. All our antennas can be completely customized to your particular applications. • These antennas have 1/4 wave spacing to the reflector. • Broadband antennas are ideal for trunking or cellular applications. • Reflector is field adjustable and has 6 positions: 60º, 75º, 90º, 105º, 130º and 160º. • Weatherproof radome to ensure continuous service during severe environmental conditions. • Heavy-duty versions are available. Please, contact our Technical Support team for consultation. DOWNLOAD PDF
-
- Provides a dual band frequency range of 700/800 MHz or 800/900 MHz Public Safety bands.
- 2.0 dBd gain achieved over its operating bandwidth
- Manufactured using the best corrosion-resistant materials and finishes available
- Ultrasonically-welded brass insert and leaf spring-loaded contact for long-term reliability
- Standard NMO type mount providing an excellent moisture seal even when the antenna is removed
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Designed and engineered to meet the fire protection codes (NFPA and IFC standards)
- Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
- Low noise figure, wide dynamic range
- Visual alarms and remote failure monitoring with Graphical User Interface
- FCC and IC certified
- FCC ID: WDM-BDA896941
- IC: 7755A-BDA896941
-
Designed and engineered to meet the fire protection codes (NFPA and IFC standards)
- Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
- Low noise figure, wide dynamic range
- Visual alarms and remote failure monitoring with Graphical User Interface
- FCC and IC certified
- FCC ID: WDM-BDA806870
- IC: 7755A-BDA806870
-
Designed and engineered to meet the fire protection codes (NFPA and IFC standards)
- Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
- Low noise figure, wide dynamic range
- Visual alarms and remote failure monitoring with Graphical User Interface
- FCC and IC certified
- FCC ID: WDM-BDA764806
- IC: 7755A-BDA764806
-
Permet la propagation à l’intérieur des bâtiments, de tunnels ou d'environnements publics de radiofréquences externes utilisées à des fins de sécurité publique
- Radôme en Kydex 6200
- Conforme aux normes de sécurité-incendie établies par la Federal Transit Administration (FTA) et la Federal Rail Administration (FRA) et testée en matière d’inflammabilité et d’émission de fumée selon les normes ASTM E-662 et ASTM E-162
-
Rugged design to withstand harsh environmental conditions
- Available in the 700/800/900 MHz configuration (4 frequency splits)
- Vertical or horizontal polarization
- Fully welded for added durability
- Black anodized versions available
-
Rugged design to withstand harsh environmental conditions
- Available in the 700/800/900 MHz configuration (4 frequency splits)
- Vertical or horizontal polarization
- Fully welded for added durability
- Black anodized versions available
