-
Performance: This antenna provides 0 dBd of gain over its operating bandwidth. It’s designed to fit perfectly in Jetta models (2006-2008), however it could be used for any other car. Our disguised antennas allow a public security organization to use a vehicle’s existing AM/FM antennas for both conventional radio receiver functions as well as allowing a two-way radio to communicate over the same antenna. This allows a covert vehicle to avoid the need for a long mobile antenna, and disguise the fact that it is equipped with a two-way radio communication device. Comprod supplies either the Original Equipment Manufacturers (OEM) antennas, or adjustable universal mounted antennas, based on customer needs. A broadcast coupler is optionally available, to allow the two- way radio transmit and receive frequencies to be shared with the vehicle’s AM/FM radio. The coupler prevents the transmit radio from damaging the AM/FM radio. When multi-band operation is required, Comprod provides the required Cross-band couplers, in order to support multiple frequency band operation on a single antenna. DOWNLOAD PDF -
- IP 66 rated
-
- IP 66 rated
-
- IP 66 rated
-
- IP 66 rated
-
- IP 66 rated
-
Our line of radome transit antennas for operation in the 806-960 MHz band consists of compact, low profile antennas in weatherproof ABS radomes. When mounted on a horizontal surface, maximum radiation is omnidirectional and vertically polarized. These antennas are an excellent choice for low clearance applications such as those found on trains, mass transit vehicles, construction equipment and police and emergency vehicles. The F-3758 model is a standard, folded radiator housed in a sturdy high-impact ABS radome. To ensure a moisture proof installation, the F-3758 model is supplied with a mounting gasket. DOWNLOAD PDF
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building. The antenna’s main application includes usage for:
- Distributed Antenna Systems (DAS) for Public Safety
- LTE communication
- Cellular bands in multiple stories of a building
- Mounting on a ceiling or gyprock wall, without need of a ground plane
-
Ideal for low clearance applications such as those found on trains, public transit vehicles.
- Low-profile rugged alternative to a 1/4 wave whip mobile antenna
- When mounted on a horizontal surface, maximum radiation is omnidirectional and vertically polarized
- Impact-resistant ABS radome
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building.
- Designed to be installed on hard surfaces such as concrete or metal structures.
- A layer of Kydex 6200 of 0.3’’ thickness is added to meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Designed for covert operations which require an effectively invisible antenna hidden inside the bumper of a vehicle. Installed at the front and rear of the vehicle, this dual kit will help you create an omnidirectional pattern around the vehicle allowing better network coverage and an optimal performance.
- Bumper Antenna for covert applications
- No tuning required
- Fits all vehicles
- Waterproof housing
- Flexible material for easy installation
- 17 feet RG-8X feed cable and connector included
-
Designed for covert operations which require an effectively invisible antenna hidden inside the bumper of a vehicle. Installed at the front and rear of the vehicle, this dual kit will help you create an omnidirectional pattern around the vehicle allowing better network coverage and an optimal performance.
- Front and Rear Antenna for covert applications
- No tuning required
- Fits all vehicles
- Waterproof housing
- Flexible material for easy installation
- 25 feet RG-8X feed cable and connector included
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building.
- Mounting on a ceiling or gyprock wall, without need of a ground plane
-
Designed for covert operations which require an effectively invisible antenna hidden inside the bumper of a vehicle.
- Antenna for covert applications
- Easy field tunable
- Fits all vehicles
- Waterproof housing
- Flexible material for easy installation
-
The F-3980 is a wide band dual antenna with an 871F-70 on the base and a 792-70 on the top. The antenna offers for the 871F-70 a choice of radiation patterns that are determined by the dipole-to-mast spacing. The F-3980 has an internal cabling and is not field adjustable. The 871F-70 antenna is offered in a ¼, 3/8, or ½ wave pattern spacing versions. SPEC Sheet
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building.
- Mounting on a ceiling or gyprock wall, without need of a ground plane
- An extra protection can be added to meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
- Frequency range of 138-174 MHz
- Unity gain achieved over its operating bandwidth
- Used for vehicles, such as ambulances, where vertical clearance is critical
- This antenna is ideal for a vehicle that enters areas with reduced headroom
- Combined with a matching circuit that is mounted inside the vehicle
- Each antenna assembly is individually calibrated on the roof of a vehicle
-
Constructed from high strength, corrosion resistant aluminum alloy and stainless steel
- Available in VHF, UHF, 800/900 MHz configurations
- Rugged design to withstand harsh environmental conditions
- Circular polarization
- DC ground for lightning protection
-
Permet la propagation à l’intérieur des bâtiments, de tunnels ou d'environnements publics de radiofréquences externes utilisées à des fins de sécurité publique
- Radôme en Kydex 6200
- Conforme aux normes de sécurité-incendie établies par la Federal Transit Administration (FTA) et la Federal Rail Administration (FRA) et testée en matière d’inflammabilité et d’émission de fumée selon les normes ASTM E-662 et ASTM E-162
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
- Gain of unity over its operating bandwidth
- Manufactured using the best corrosion-resistant materials and finishes available
- Triple-plated chrome brass with a large insert molded low-loss coil form and spring-loaded, gold-plated contact
- Rubber boot to ensure a moisture-proof installation
- Standard TAD / NMO type mount
-
Individually calibrated to ensure the best performance in a disguised appearance
- Two or three separate frequency segments in a given mobile band
- Cross-channel operation in two mobile bands with one antenna
- Alternative antennas will be recommended, where required (e.g. Euro-style, or universal mount traditional whip)
-
Ideal for low clearance applications such as those found on trains, public transit vehicles, construction equipment and police vehicles
-
- Low-profile rugged alternative to a ¼-wave whip mobile antenna
- When mounted on a horizontal surface, maximum radiation is omnidirectional and vertically polarized
- High strength cast aluminum design
-
-
DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNWide band, ideal for base station or in-building applications
- Available in UHF configuration (3 frequency splits)
- Very high front-to-back ratio
- Performance is constant throughout the band
- Rugged design to withstand harsh environmental conditions
- Vertical or horizontal polarization
- DC ground for lightning protection
