- Noise Figure 6 dB with LNA with MDS ~-168 dB/Hz for very low incoming signals
- Impedance of 50 Ohm and 75 Ohm
- Gain variation S21 (fo) of ±1 dB for 90° C variation
- Better linearity,
- Excellent gain flatness
- Tx, Rx and Link gain control
- Real-time diagnostic of deployed links through GUI installed on the PC
DESIGNED FOR ENVIRONMENTS THAT REQUIRE INTERNAL PROPAGATION OF RF FOR PUBLIC SAFETY NEEDS
Comprod In-Building products have been deployed for Mission-Critical projects including subway transit in-tunnel or underground projects, high-rise In-Building systems, nuclear power plants, correctional facilities, shopping malls, parking garages, casinos and public sports arenas.
Our solutions
• incorporate single, dual, and tri-band frequency specifications
• are offered in a wide range of enclosures: radomes, low profile, 6200 Kydex fire-retardant material, ABS high-impact, polycarbonate
Comprod can complement antenna systems with other RF components to build out the network: splitters, couplers, taps, cables, connectors, signal boosters (Bi-Directional Amplifiers) required for complete RF needs for In-Building Public Safety requirements.
-
This compact unidirectional (1 way) RF over Fiber (RFoF) transmitter is designed for conversion of RF signals to optical signals carried over long distances. The Tx unit using an optical transmitter, converts RF to Optical signal and the Rx unit converts back to RF signal. The two units are connected through customer’s single mode fiber. -
This compact bidirectional (2 way) RF over Fiber (RFoF) transceiver is designed for Transmit/Receive antenna interfaces- applications where both an uplink as well as a downlink are required. The module employs WDM technology to use only 1 fiber link and supports 50-2500, 3000, 4000 and 6000 MHz. The RFoF link has excellent gain flatness and can be configured to have 0.5dB gain tracking between different links.
- Noise Figure 6 dB with LNA
- Impedance of 50 Ohm. 75 Ohm is optional with similar VSWR, by using SMA/BNC adaptor.
- Gain variation S21 (fo) of ±1 dB for 90° C variation
- Better linearity, excellent gain flatness, and Tx, Rx and Link gain control
- Real-time diagnostic of deployed links through GUI installed on the PC
- LNA ‘ON’ or ‘OFF’ is selected by the RFoF user software
-
PE-48V-480W-55AH-UL: Battery backup system compatible with our VHF/UHF BDA and any other 48V BDA. Features
- Certified to UL 924
- AC input: 115/230 VAC (factory wired for 120 V AC)
- Input protection: AC breaker
- Load protection: DC breaker
- Typical dimensions (H x W x D): 30” x 23” x 10.5”
- Shipping Weight: 114 lbs for 24V system, 230 lbs for 48 V system
- Batteries Included: maintenance free, valve regulated, sealed lead acid 55 AH capacity
- NFPA compliant Dry Contact Alarms for the following conditions:
- Charger Failure
- Battery Discharged to 30 % of capacity.
- AC Power or Rectifier failure
-
PE-24V-240W-55AH-UL: Battery backup system compatible with our VHF/UHF BDA and any other 24V BDA. Features
- Certified to UL 924
- AC input: 115/230 VAC (factory wired for 120 V AC)
- Input protection: AC breaker
- Load protection: DC breaker
- Typical dimensions (H x W x D): 30” x 23” x 10.5”
- Shipping Weight: 114 lbs for 24V system, 230 lbs for 48 V system
- Batteries Included: maintenance free, valve regulated, sealed lead acid 55 AH capacity
- NFPA compliant Dry Contact Alarms for the following conditions:
- Charger Failure
- Battery Discharged to 30 % of capacity.
- AC Power or Rectifier failure
-
Frequency Range: 580-6000 MHz Gain: 8-9 dBd
This antenna is a broadband antenna that can be used for public safety as well as in cellular bands. It makes an ideal solution for a donor antenna for a DAS system. Our In-building system antennas are designed to provide excellent coverage solutions in order for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments. Features:- Rugged design to withstand the most extreme environmental conditions.
- Extra wide bandwidth for use in multiple bands.
-
Frequency Range: 580-6000 MHz Gain: 8-9 dBd
This antenna is a broadband antenna that can be used for public safety as well as in cellular bands. It makes an ideal solution for a donor antenna for a DAS system. Our In-building system antennas are designed to provide excellent coverage solutions in order for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments. Features:- Rugged design to withstand the most extreme environmental conditions.
- Extra wide bandwidth for use in multiple bands.
-
Frequency Range: 580-6000 MHz Gain: 8-9 dBd
This antenna is a broadband antenna that can be used for public safety as well as in cellular bands. It makes an ideal solution for a donor antenna for a DAS system. Our In-building system antennas are designed to provide excellent coverage solutions in order for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments. Features:- Rugged design to withstand the most extreme environmental conditions.
- Extra wide bandwidth for use in multiple bands.
-
Wide band, ideal for Public Safety and Cellular applications:
- Provides excellent coverage solutions in order for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments.
- Rugged design to withstand the most extreme environmental conditions.
- Extra wide bandwidth for use in multiple bands.
-
Wide band, ideal for Public Safety and Cellular applications:
- Provides excellent coverage solutions in order for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments.
- Rugged design to withstand the most extreme environmental conditions.
- Extra wide bandwidth for use in multiple bands.
-
The Wide-band design series 27-13-0X-NF covers the range of 130-1000 MHz • Available in 2 way, 3-way or 4-way configuration. • 300 Watt power Handling • Airline design to achieve minimum insertion loss • Low PIM Available • Suitable for outdoor and indoor applications • RoHS 2.0 compliant DOWNLOAD PDF
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building. The antenna’s main application includes usage for:
- Distributed Antenna Systems (DAS) for Public Safety
- LTE communication
- Cellular bands in multiple stories of a building
- Mounting on a ceiling or gyprock wall, without need of a ground plane
-
Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building.
- Designed to be installed on hard surfaces such as concrete or metal structures.
- A layer of Kydex 6200 of 0.3’’ thickness is added to meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
