Signal Boosters (BDA)

  • BDA 806870 Bi-Directional Amplifier (Signal Booster)
    Designed and engineered to meet the fire protection codes (NFPA and IFC standards). Please, note that BDA138174 is a generic number. Actual order number will be assigned to a system design. Specific frequencies are required for this product design.
    • Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
    • Low noise figure, wide dynamic range
    • Visual alarms and remote failure monitoring with Graphical User Interface
    • FCC and IC certified
      • FCC ID: WDM-BDA138174
      • IC: 7755A-BDA138174
    This product is available in UDA version as well. DOWNLOAD PDF DOWNLOAD MANUALS
  • BDA 806870 Bi-Directional Amplifier (Signal Booster)
    Designed and engineered to meet the fire protection codes (NFPA and IFC standards). Please, note that BDA380512 is a generic number. Actual order number will be assigned to a system design. Specific frequencies are required for this product design.
    • Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
    • Low noise figure, wide dynamic range
    • Visual alarms and remote failure monitoring with Graphical User Interface
    • FCC and IC certified
      • FCC ID: WDM-BDA380512
      • IC: 7755A-BDA380512
    This product is available in UDA version as well. DOWNLOAD PDF DOWNLOAD MANUALS
  • BDA 764806 Bi-Directional Amplifier (Signal Booster)

    BDA 764806 Bi-Directional Amplifier (Signal Booster)

    Frequency Range: DL: 764-776 UL: 794-806 MHz
    Designed and engineered to meet the fire protection codes (NFPA and IFC standards)
    • Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
    • Low noise figure, wide dynamic range
    • Visual alarms and remote failure monitoring with Graphical User Interface
    • FCC and IC certified
      • FCC ID: WDM-BDA764806
      • IC: 7755A-BDA764806
    This product is available in UDA version as well. DOWNLOAD PDF DOWNLOAD MANUALS  
  • BDA 806870 Bi-Directional Amplifier (Signal Booster)

    BDA 806870 Bi-Directional Amplifier (Signal Booster)

    Frequency Range: DL: 851-869 UL: 806-824 MHz
    Designed and engineered to meet the fire protection codes (NFPA and IFC standards)
    • Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
    • Low noise figure, wide dynamic range
    • Visual alarms and remote failure monitoring with Graphical User Interface
    • FCC and IC certified
      • FCC ID: WDM-BDA806870
      • IC: 7755A-BDA806870
    This product is available in UDA version as well. DOWNLOAD PDF DOWNLOAD MANUALS
  • Bi-Directional Amplifier (896941)

    BDA 896941 Bi-Directional Amplifier (Signal Booster)

    Frequency Range: DL: 935-941 UL: 896-901 MHz
    Designed and engineered to meet the fire protection codes (NFPA and IFC standards)
    • Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
    • Low noise figure, wide dynamic range
    • Visual alarms and remote failure monitoring with Graphical User Interface
    • FCC and IC certified
      • FCC ID: WDM-BDA896941
      • IC: 7755A-BDA896941
    DOWNLOAD PDF DOWNLOAD MANUALS
  • Bidirectional Fiber Interface Module for BDA, RF over Fiber (RFoF)

    Frequency Range: 50-2500, 3000, 4000 and 6000 MHz
    This compact bidirectional (2 way) RF over Fiber (RFoF) transceiver is designed for Transmit/Receive antenna interfaces- applications where both an uplink as well as a downlink are required. The module employs WDM technology to use only 1 fiber link and supports 50-2500, 3000, 4000 and 6000 MHz. The RFoF link has excellent gain flatness and can be configured to have 0.5dB gain tracking between different links.
    • Noise Figure 6 dB with LNA
    • Impedance of 50 Ohm. 75 Ohm is optional with similar VSWR, by using SMA/BNC adaptor.
    • Gain variation S21 (fo) of ±1 dB for 90° C variation
    • Better linearity, excellent gain flatness, and Tx, Rx and Link gain control
    • Real-time diagnostic of deployed links through GUI installed on the PC
    • LNA ‘ON’ or ‘OFF’ is selected by the RFoF user software
    For special applications that require temperature stability operation, a unique algorithm supporting 0.5 dB over -200C to +70C may be activated. The RFoF links operate from a flexible DC power from 5 to 12 Volts. The RF and Optical parameters: link gain, noise figure, P1dB, optical power can be remotely adjusted with help of internal microcontroller that allows for RF and Optical control. Optional control card for SNMP remote management can be added at a later stage. The built-in LNA is activated through the RFoF configuration software. DOWNLOAD PDF
  • PE-24V-240W-55AH-UL: Battery backup system compatible with our VHF/UHF BDA and any other 24V BDA. Features
    • Certified to UL 924
    • AC input: 115/230 VAC (factory wired for 120 V AC)
    • Input protection: AC breaker
    • Load protection: DC breaker
    • Typical dimensions (H x W x D): 30” x 23” x 10.5”
    • Shipping Weight: 114 lbs for 24V system, 230 lbs for 48 V system
    • Batteries Included: maintenance free, valve regulated, sealed lead acid 55 AH capacity
    • NFPA compliant Dry Contact Alarms for the following conditions:
      • Charger Failure
      • Battery Discharged to 30 % of capacity.
      • AC Power or Rectifier failure
    Cabinet Type NEMA-4, UL listed, welded aluminum with IP 65 battery vent and locking door, 4 each 1/2” knock-outs for cable entry on sides and bottom (16 total), IP-68 cable entries. Red powder coat wall mount. DOWNLOAD PDF
  • PE-48V-480W-55AH-UL: Battery backup system compatible with our VHF/UHF BDA and any other 48V BDA. Features
    • Certified to UL 924
    • AC input: 115/230 VAC (factory wired for 120 V AC)
    • Input protection: AC breaker
    • Load protection: DC breaker
    • Typical dimensions (H x W x D): 30” x 23” x 10.5”
    • Shipping Weight: 114 lbs for 24V system, 230 lbs for 48 V system
    • Batteries Included: maintenance free, valve regulated, sealed lead acid 55 AH capacity
    • NFPA compliant Dry Contact Alarms for the following conditions:
      • Charger Failure
      • Battery Discharged to 30 % of capacity.
      • AC Power or Rectifier failure
    Cabinet Type NEMA-4, UL listed, welded aluminum with IP 65 battery vent and locking door, 4 each 1/2” knock-outs for cable entry on sides and bottom (16 total), IP-68 cable entries. Red powder coat wall mount. DOWNLOAD PDF
  • This compact unidirectional (1 way) RF over Fiber (RFoF) transmitter is designed for conversion of RF signals to optical signals carried over long distances. The Tx unit using an optical transmitter, converts RF to Optical signal and the Rx unit converts back to RF signal. The two units are connected through customer’s single mode fiber.
    • Noise Figure 6 dB with LNA with MDS ~-168 dB/Hz for very low incoming signals
    • Impedance of 50 Ohm and 75 Ohm
    • Gain variation S21 (fo) of ±1 dB for 90° C variation
    • Better linearity,
    • Excellent gain flatness
    • Tx, Rx and Link gain control
    • Real-time diagnostic of deployed links through GUI installed on the PC
    The RFoF links operate from a flexible DC power from 5 to 12 Volts.  Both the Tx and Rx units includes LNAs and variable attenuators that enable customer to adjust the Noise Figure, Input P1dB, and IP3 with wide dynamic range values. The LNA can be operated through the RFoF software allowing RF input power in the range of -100 dBm/1MHz for wideband applications, with low Noise Figure of 6 dB. The RFoF link has excellent gain flatness with 0.5dB gain tracking between different links. For special applications requiring temperature stability operation, a unique algorithm supporting 0.5 dB over 1000C has been developed. The RF and Optical parameters: link gain, noise figure, P1dB, optical power can be remotely adjusted with help of internal microcontroller that allows for RF and Optical control, either locally or remotely. DOWNLOAD PDF