- Can easily support 250 kHz Tx-Tx spacing
- Flexible design: from 1-21 channel capacity
- Expandable: 1 or more additional channels at a time; re-configurable equipment
- 746-1000 MHz, 254 MHz of operating bandwidth
- Temperature compensation to ensure frequency stability
- High attenuation to minimize desense and interference
- Ultra-low insertion losses; low coupling and bridging losses
- Continuous high-power handling capability; 150 watts – 24/7
-
Incorporates expandability, close frequency spacing and some of the lowest insertion losses in the industry -
Ideal for combining multiple Rx frequencies onto the same antenna
- Available in 2, 4, 8, 12, 16 and 32
- Simple and cost-effective design
- Standard 19” Rack Mount (RM) or cavity-mounted (CM) versions
- Each unit consists of a power splitter and an RF amplifier.
- Plug-in Power Supply (PS) optional
-
Ideal for combining multiple Rx frequencies onto the same antenna
- Available in 2, 4, 8, 12, 16 and 32
- Simple and cost-effective design
- Standard 19” Rack Mount (RM) or cavity-mounted (CM) versions
- Each unit consists of a power splitter and an RF amplifier.
- Plug-in Power Supply (PS) optional
-
Combines multiple receiver frequencies onto the same antenna
- A low noise amplifier provides gain across the frequency band
- Low noise figure and low intermodulation generation
- Features up to 16 ports (24 and 32 port versions are available)
- -30 dB signal sampler port that can also be used to inject a signal
-
Designed for easy installation, reducing coaxial runs, and in-building applications with multi-band antennas
- Allows multiple bands to share the same transmission lines
- Available in VHF, UHF and 800/900 MHz bands
- Can be Tower-Mounted (TM), Rack-Mounted (RM) or stand alone
-
Designed for easy installation, reducing coaxial runs, and in-building applications with multi-band antennas
- Allows multiple bands to share the same transmission lines
- Available in VHF, UHF and 800/900 MHz bands
- Can be Tower-Mounted (TM), Rack-Mounted (RM) or stand alone
-
Fully expandable and reconfigurable
- Features X-Pass, plug-and-play technology
- Designed to offer engineers and technicians many options when designing or upgrading a site
-
Dielectric resonator technology resulting in higher performance than standard RF cavities in a much smaller package
- Available for the 764-776, 851-869 and 935-941 MHz bands
- Designed for tight channel spacing
- Lowest insertion loss, high isolation for maximum coverage and reduced interference
- Easy field expandability with X-Pass technology - one channel at a time
- Compact, robust design for rapid installations, increased mobility and ease of maintenance
-
Dielectric resonator technology resulting in higher performance than standard RF cavities in a much smaller package
- Available for the 764-776, 851-869 and 935-941 MHz bands
- Designed for tight channel spacing
- Lowest insertion loss, high isolation for maximum coverage and reduced interference
- Star configuration
- Compact, robust design for rapid installations, increased mobility and ease of maintenance
-
Designed for compact, close frequency installations. Ideal for very closely spaced frequency transmitters
- High isolation: minimizes intermodulation products
- Low loss: maximizes system performance
- Continuous power:
- Physical size and materials used maximizes the performance across the operating band
-
Designed for compact, close frequency installations. Ideal for very closely spaced frequency transmitters
- Ideal for intermodulation panels, providing extra protection with their second harmonic filters, when physical space is at a premium or is constrained, and for providing extra isolation between two very close transmitters
- High isolation: minimizes intermodulation products
- Low loss: maximizes system performance
- Continuous power:
- Physical size and materials used maximizes the performance across the operating band
-
Designed for compact, close frequency installations. Ideal for very closely spaced frequency transmitters
- Ideal for intermodulation panels, providing extra protection with their second harmonic filters, when physical space is at a premium or is constrained, and for providing extra isolation between two very close transmitters
- High isolation: minimizes intermodulation products
- Low loss: maximizes system performance
- Continuous power:
- Physical size and materials used maximizes the performance across the operating band
-
Designed for compact, close frequency installations. Ideal for very closely spaced frequency transmitters
- Ideal for intermodulation panels, providing extra protection with their second harmonic filters, when physical space is at a premium or is constrained, and for providing extra isolation between two very close transmitters
- High isolation: minimizes intermodulation products
- Low loss: maximizes system performance
- Continuous power:
- Physical size and materials used maximizes the performance across the operating band
-
Designed for compact, close frequency installations. Ideal for very closely spaced frequency transmitters
- Ideal for intermodulation panels, providing extra protection with their second harmonic filters, when physical space is at a premium or is constrained, and for providing extra isolation between two very close transmitters
- High isolation: minimizes intermodulation products
- Low loss: maximizes system performance
- Continuous power:
- Physical size and materials used maximizes the performance across the operating band
-
The Enclosed Dipoles with Black Anodized Reflector are available in 2-, 4-, or 8- dipole configurations. These antennas can be adjusted from 60º to 160º. All our antennas can be completely customized to your particular applications. • These antennas have 1/4 wave spacing to the reflector. • Broadband antennas are ideal for trunking or cellular applications. • Reflector is field adjustable and has 6 positions: 60º, 75º, 90º, 105º, 130º and 160º. • Weatherproof radome to ensure continuous service during severe environmental conditions. • Heavy-duty versions are available. Please, contact our Technical Support team for consultation. DOWNLOAD PDF
-
The Enclosed Dipoles with Black Anodized Reflector are available in 2-, 4-, or 8- dipole configurations. These antennas can be adjusted from 60º to 160º. All our antennas can be completely customized to your particular applications. • These antennas have 1/4 wave spacing to the reflector. • Broadband antennas are ideal for trunking or cellular applications. • Reflector is field adjustable and has 6 positions: 60º, 75º, 90º, 105º, 130º and 160º. • Weatherproof radome to ensure continuous service during severe environmental conditions. • Heavy-duty versions are available. Please, contact our Technical Support team for consultation. DOWNLOAD PDF
-
The Enclosed Dipoles with Black Anodized Reflector are available in 2-, 4-, or 8- dipole configurations. These antennas can be adjusted from 60º to 160º. All our antennas can be completely customized to your particular applications. • These antennas have 1/4 wave spacing to the reflector. • Broadband antennas are ideal for trunking or cellular applications. • Reflector is field adjustable and has 6 positions: 60º, 75º, 90º, 105º, 130º and 160º. • Weatherproof radome to ensure continuous service during severe environmental conditions. • Heavy-duty versions are available. Please, contact our Technical Support team for consultation. DOWNLOAD PDF
-
- Provides a dual band frequency range of 700/800 MHz or 800/900 MHz Public Safety bands.
- 2.0 dBd gain achieved over its operating bandwidth
- Manufactured using the best corrosion-resistant materials and finishes available
- Ultrasonically-welded brass insert and leaf spring-loaded contact for long-term reliability
- Standard NMO type mount providing an excellent moisture seal even when the antenna is removed
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Permet la propagation à l’intérieur des bâtiments, de tunnels ou d'environnements publics de radiofréquences externes utilisées à des fins de sécurité publique
- Radôme en Kydex 6200
- Conforme aux normes de sécurité-incendie établies par la Federal Transit Administration (FTA) et la Federal Rail Administration (FRA) et testée en matière d’inflammabilité et d’émission de fumée selon les normes ASTM E-662 et ASTM E-162
-
Rugged design to withstand harsh environmental conditions
- Available in the 700/800/900 MHz configuration (4 frequency splits)
- Vertical or horizontal polarization
- Fully welded for added durability
- Black anodized versions available
-
Rugged design to withstand harsh environmental conditions
- Available in the 700/800/900 MHz configuration (4 frequency splits)
- Vertical or horizontal polarization
- Fully welded for added durability
- Black anodized versions available
-
Rugged design to withstand harsh environmental conditions
- Available in the 700/800/900 MHz configuration (5 frequency splits)
- Vertical or horizontal polarization
- Fully welded for added durability
- Black anodized version available
- Mounting hardware (127-85) supplied
- 980-70*5 is our dual band 700/800 MHz antenna: 764-870 MHz
-
Available in three frequency splits: 746-806; 806-869 or 885-960 within the 746 to 960 MHz range.
- Constructed with a high quality fiberglass light-grey radome
- Aluminum mounting hardware included with the antenna
-
Ideal for trunking or cellular applicationsDOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS
- Available in the 700/800/900 MHz configuration (2 frequency splits)
- These antennas have 1/4 wave spacing to the reflector.
- Reflector is field-adjustable and has 5 positions: 60º, 90º, 105º, 130º and 160º
- Weatherproof radome to ensure continuous service during severe environmental conditions
- Heavy-duty versions available
-
Ideal for trunking or cellular applications
- This antenna is offered in an offset pattern, 1/4 wave versions.
- This antenna is also available in an offset pattern, 1/2 wave versions.
- Broadband antennas are ideal for trunking or cellular applications.
- Weatherproof radome to ensure continuous service during severe environmental conditions.
- Versions with 3, 6, and 9-degree downtilt are also available.
-
Ideal for trunking or cellular applications
- This antenna is offered in an offset pattern, 1/2 wave versions.
- This antenna is also available in an offset pattern, 1/4 wave versions.
- Broadband antennas are ideal for trunking or cellular applications.
- Weatherproof radome to ensure continuous service during severe environmental conditions.
- Versions with 3, 6, and 9-degree downtilt are also available.
-
Ideal for trunking or cellular applications
- This antenna is offered in an offset pattern, 1/4 wave versions.
- Each antenna is also available in an offset pattern, 1/2 wave versions.
- Broadband antennas are ideal for trunking or cellular applications.
- Weatherproof radome to ensure continuous service during severe environmental conditions.
- Versions with 3, 6, and 9-degree downtilt are also available.
-
Ideal for trunking or cellular applications
- This antenna is offered in an offset pattern, 1/2 wave versions.
- Each antenna is also available in an offset pattern, 1/4 wave versions.
- Broadband antennas are ideal for trunking or cellular applications.
- Weatherproof radome to ensure continuous service during severe environmental conditions.
- Versions with 3, 6, and 9-degree downtilt are also available.
-
Ideal for trunking or cellular applications
- This antenna is offered in an offset pattern, 1/4 wave versions.
- This antenna is also available in an offset pattern, 1/2 versions.
- Broadband antennas are ideal for trunking or cellular applications.
- Weatherproof radome to ensure continuous service during severe environmental conditions.
- Versions with 3, 6, and 9-degree downtilt are also available.
- This antenna is Low-PIM (-150 dBc; two 20W carriers).
-
Ideal for trunking or cellular applications
- This antenna is offered in an offset pattern, 1/2 wave versions.
- This antenna is also available in an offset pattern, 1/4 versions.
- Broadband antennas are ideal for trunking or cellular applications.
- Weatherproof radome to ensure continuous service during severe environmental conditions.
- Versions with 3, 6, and 9-degree downtilt are also available.
- This antenna is Low-PIM (-150 dBc; two 20W carriers).
-
Ideal for trunking or cellular applications
- Available in the 700/800/900 MHz configuration (2 frequency splits)
- These antennas have 1/4 wave spacing to the reflector.
- Reflector is field-adjustable and has 5 positions: 60º, 90º, 105º, 130º and 160º
- Weatherproof radome to ensure continuous service during severe environmental conditions
- Heavy-duty versions available
-
Ideal for trunking or cellular applications.
- This antenna is offered in an offset pattern, 1/4 wave versions.
- Each antenna is also available in an offset pattern, 1/2 wave versions.
- Broadband antennas are ideal for trunking or cellular applications.
- Weatherproof radome to ensure continuous service during severe environmental conditions.
- Versions with 3, 6, and 9-degree downtilt are also available.
-
Ideal for trunking or cellular applications.
- This antenna is offered in an offset pattern, 1/2 wave versions.
- Each antenna is also available in an offset pattern, 1/4 wave versions.
- Broadband antennas are ideal for trunking or cellular applications.
- Weatherproof radome to ensure continuous service during severe environmental conditions.
- Versions with 3, 6, and 9-degree downtilt are also available.
