Products - Page 11 of 13

(2)987-70 Yagi Antenna Array

Frequency Range: 746-960 MHz

Gain: 15 dBd

The (2)987-70 Yagi Antenna is an array of two stacked 987-70 yagi antennas. All our antennas can be completely customized to your particular applications. Our antennas can be black anodized, vertically or horizontally polarized.

Each antenna has a rugged design to withstand harsh environmental conditions.
The mounting hardware supplied will permit either vertical or horizontal polarization.
Support pipe to hold the 2 antennas together is supplied.
All 980 Series Yagi antennas are fully welded.

DOWNLOAD PDF

Details

59-13-44 Iris Filter (VHF)

Frequency Range: 138-174 MHz

Our Bandpass preselector filters are designed to improve selectivity in a compact package. They represent an optimized solution for receiver and transmitter. This construction with solid welded cavities, gold Alodine finish, silver-plated loops, and silver-plated tuning rods offers a minimum insertion loss and good stability in temperature. These filters are the ideal solution to be used in crowded RF environment site where the noise is an important factor. DOWNLOAD PDF

Details

59-13-46 Iris Filter (VHF)

Frequency Range: 138-174 MHz

Our Bandpass preselector filters are designed to improve selectivity in a compact package. They represent an optimized solution for receiver and transmitter. This construction with solid welded cavities, gold Alodine finish, silver-plated loops, and silver-plated tuning rods offers a minimum insertion loss and good stability in temperature. These filters are the ideal solution to be used in crowded RF environment site where the noise is an important factor. DOWNLOAD PDF

Details

356-75-ABS VHF Antenna

Frequency Range: 138-174 MHz

Gain: Unity

Ideal for low clearance applications such as those found on trains, public transit vehicles.

Low-profile rugged alternative to a 1/4 wave whip mobile antenna
When mounted on a horizontal surface, maximum radiation is omnidirectional and vertically polarized
Impact-resistant ABS radome

DOWNLOAD PDF

Details

F-33496 Sharkfin Antenna

Frequency Range: 760-870 MHz

The F-33496 is a Covert Vehicle Antenna disguised in Shark Fin housing. The shark fin style disguised antennas allow a public security organization to use a vehicle’s existing AM/FM antennas for both conventional radio receiver functions as well as allowing a two-way radio to communicate over the same antenna. This allows a covert vehicle to avoid the need for a long mobile antenna. A broadcast coupler is optionally available, to allow the two- way radio transmit and receive frequencies to be shared with the vehicle’s AM/FM radio. The coupler prevents the transmit radio from damaging the AM/FM radio.

0 dBd of gain
Less than 1.7:1 VSWR over its operating bandwidth
A radiation pattern nearly omnidirectional in azimuth
A broadcast coupler is optionally available
Cross-band couplers when multi-band operation required on a single antenna

DOWNLOAD PDF

Details

F-33499 Sharkfin Antenna

Frequency Range: 406-470 MHz

The F-33499 is a Covert Vehicle Antenna disguised in Shark Fin housing. This antenna provides 0 dBd of gain and less than 1.7:1 VSWR over 10 MHz bandwidth in the range of frequency of 406 to 470MHz. It has a radiation pattern nearly omnidirectional in azimuth. The shark fin style disguised antennas allow a public security organization to use a vehicle’s existing AM/FM antennas for both conventional radio receiver functions as well as allowing a two-way radio to communicate over the same antenna. This allows a covert vehicle to avoid the need for a long mobile antenna.

0 dBd of gain
Less than 1.7:1 VSWR over its operating bandwidth
A radiation pattern nearly omnidirectional in azimuth
A broadcast coupler is optionally available
Cross-band couplers when multi-band operation required on a single antenna

DOWNLOAD PDF

Details

F-33486 Dual Band Antenna

Gain: 3 / 3 / 5 dBd

Our premium dual-band antennas feature heavy-duty design and excellent performance. Perfect for both voice and data transmission. These antennas are optimized for the band 138-145MHz and 810-860 MHz.

Manufactured using the bestcorrosion resistant materials and finishes available
Ideal for commercial applications in harsh environment
Weatherproof rubber boot seals and overlap construction
Standard Mounting TAD/NMO type mount

DOWNLOAD PDF

Details

F-33486-S Dual Band Antenna with Spring

Gain: 3 / 3 / 5 dBd

Our premium dual-band antennas feature heavy-duty design and excellent performance. Perfect for both voice and data transmission. These antennas are optimized for the band 138-145MHz and 810-860 MHz.

Manufactured using the bestcorrosion resistant materials and finishes available
Ideal for commercial applications in harsh environment
Weatherproof rubber boot seals and overlap construction
Standard Mounting TAD/NMO type mount

DOWNLOAD PDF

Details

UWB1304000-4310M Ultra-Wideband

Frequency Range: 130-4000 MHz

Gain: Unity

Usage for Distributed Antenna Systems (DAS) for Public Safety or LTE communication in multiple stories of a building. The antenna’s main application includes usage for:

Distributed Antenna Systems (DAS) for Public Safety
LTE communication
Cellular bands in multiple stories of a building
Mounting on a ceiling or gyprock wall, without need of a ground plane

DOWNLOAD PDF

Details

774-70-HDWBTM-1/2 UHF Exposed Dipole

Frequency Range: 406-512 MHz

Gain: 8.0-8.5 dBd

The 774-70-HDBWTM-1/2 is a Wide Band, Black Anodized, Heavy Duty Welded, UHF Antenna. It is an extremely rugged 4 dipole Antenna designed for multicoupled systems. All our antennas can be customized to your particular applications. Our antennas can be configured for side mount or top mount. This antenna is configured for top mount. The 774-70-HDBWTM-1/2 antenna has internal cabling and fixed dipole-mast spacing. The antenna has either 406-470 MHz or 450-512 MHz split.

Low VSWR version with maximum gain over specified frequency.
Heavy Duty and Black Anodized version.
This antenna is 1/2 wavelength spacing version offering bidirectional radiation pattern.
Standard connector is N-Male and optional 7/16 DIN or 4.3-10 is also available.

DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS

Details

F-33030-D Wideband Ultra Heavy Duty Omnidirectional Antenna

Frequency Range: 138-174 MHz

Gain: 6.0 dBd

The F-33030-D is a Wide Band Ultra Heavy Duty Omnidirectional Antenna specifically designed for trunked multicoupled and X-pass systems applications. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints.

The F-33030-D has internal cabling design and is not field adjustable.
Mast 4,5" (114.3 mm) O.D.
Passive Intermodulation Specification is measured in the third order intermodulation products, using two 20 watts (+43 dBm) Carriers.

DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS

Details

F-33031-D Wideband Heavy Duty Omnidirectional Antenna

Frequency Range: 138-174 MHz

Gain: 6.0 dBd

The F-33031-D is a Wide Band Heavy Duty Omnidirectional Antenna specifically designed for trunked multicoupled and X-pass systems applications. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints.

The F-33031-D has internal cabling design and is not field adjustable.
Mast 3,5" (88.9 mm) O.D.
Passive Intermodulation Specification is measured in the third order intermodulation products, using two 20 watts (+43 dBm) Carriers.

DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS

Details

298-70 VHF Yagi Antenna

Frequency Range: 138-174 MHz

Gain: 12.5 dBd

Rugged design to withstand harsh environmental conditions

Vertical or horizontal polarization
DC ground for lightning protection
Black anodized and heavy-duty versions available

DOWNLOAD PDF DOWNLOAD DIGITAL PATTERN

Details

F-33378 Low-Band Exposed Dipole Antenna

Frequency Range: 30-76 MHz

Gain: 2.5 dBd

The Low Band Exposed Dipole Antenna Series are available in our standard or heavy-duty construction. These exposed dipole antennas come in both single and dual configurations, depending on the gain required. They are constructed from high strength, corrosion resistant aluminum alloy, hot galvanized steel mounting hardware, and use unique PVC off-set support arms. Our heavy-duty versions have dual support braces and use a superior anti-torque support. All components are oversized.

Each antenna has a rugged design to withstand the most extreme environmental conditions.
Supplied with anti-torque supports.
DC ground for lightning protection.
Can be black anodized coating for enhanced anti-corrosion and de-icing properties

DOWNLOAD PDF DOWNLOAD DIGITAL PATTERN

Details

F-3647 Wideband Dual Antenna

Frequency Range: 138-174 (871F-70), 406-512 (771-70) MHz

Gain: 2.0-2.5 dBd

The F-3647 is a wideband dual antenna with an 871F-70 on the base and a 771-70 on the top. The antenna offers for the 871F-70 & 771-70 a choice of radiation patterns that are determined by the dipole-to-mast spacing. The F-3647 has an internal cabling and is not field adjustable. The 871F-70 & 771-70 antenna is offered in a ¼, 3/8, or ½ wave pattern spacing versions. The antenna can be black anodized. Heavy Duty version of the antenna is also available. DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS

Details

F-3647-HD Heavy Duty Wideband Dual Antenna

Frequency Range: 138-174 (871F-70), 406-512 (771-70) MHz

Gain: 2.0-2.5 dBd

The F-3647 is a heavy duty wideband dual antenna with an 871F-70 on the base and a 771-70 on the top. The antenna offers for the 871F-70 & 771-70 a choice of radiation patterns that are determined by the dipole-to-mast spacing. The F-3647 has an internal cabling and is not field adjustable. The 871F-70 & 771-70 antenna is offered in a ¼, 3/8, or ½ wave pattern spacing versions. The antenna can be black anodized. Heavy Duty version of the antenna is also available. DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS

Details

Dual, Triple and Quad Feed Exposed Dipole Array

Frequency Range: 138-174 MHz

Gain: 2.0-2.5 dBd

Dual, Triple, and Quad Feed Exposed Dipole Array The (2)871F-70, (3)871F-70, and (4)871F-70 are wide band multiple antennas designed for multicoupled systems. The antenna offers a choice of radiation patterns that are determined by the dipole-to-mast spacing. • These antennas have internal cabling and are not field adjustable. • Each antenna is offered in a 1/4, 3/8, or 1/2 wave pattern spacing versions. • Typical antenna to antenna isolation is 30dB, versions with 40 dB of isolation are also available. • Heavy duty versions are available. Please contact Comprod Inc. Technical support technician for consultation. DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS

Details

UHF Control Station Combiner – UHF CSC

Frequency Range: 380-512 MHz

Our Control Station Combiners (CSC) is an ideal solution to reduce the number of antennas required on a communications site by maintaining a high radio-to-radio isolation at all times. It can significantly reduce tower clutter and loading, and simplify cabling installation at control center facilities. This product provides frequency-agile operation across a frequency range from 380 up to 512 MHz. This combiner has the possibilities to be connected to two antennas TX and RX. In case of only one antenna is used for TX and RX, an external duplexer is required. DOWNLOAD PDF

Details

F-3758

Frequency Range: 806-960 MHz

Gain: Unity

Our line of radome transit antennas for operation in the 806-960 MHz band consists of compact, low profile antennas in weatherproof ABS radomes. When mounted on a horizontal surface, maximum radiation is omnidirectional and vertically polarized. These antennas are an excellent choice for low clearance applications such as those found on trains, mass transit vehicles, construction equipment and police and emergency vehicles. The F-3758 model is a standard, folded radiator housed in a sturdy high-impact ABS radome. To ensure a moisture proof installation, the F-3758 model is supplied with a mounting gasket. DOWNLOAD PDF

Details

440-70-HDBP*3 UHF Corner Reflector Antenna

Frequency Range: 380-430 MHz

Gain: 9.5 dBd

The 440-70-HDBP*3 is Heavy Duty, Black Anodized, Low PIM Corner Reflector Antenna. This antenna has a very high front-to-back ratio. It is broadband and is ideal for point-to-point applications. Performance is constant throughout the band. The antenna has a rugged design to withstand harsh environmental conditions.

The mounting hardware supplied will permit either vertical or horizontal polarization
DC ground for lightning protection

DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS

Details

F-3990 VHF Peak Performance Antenna

Frequency Range: Available for 136-174 MHz

F-3990 This VHF antenna is designed for applications that require peak performance in the 136-174 MHz while tolerating a VSWR around 2.0:1. This antenna has a loading coil between the radiating element and the base. This coil increases the electrical length and makes the antenna perform electrically as a 1/4 wave antenna, but shorter than a regular 1/4 wave antenna. Typical gain, when mounted on a ground plane, is comparable to a full 1/4 wave. Mounts on NMO. The upper element is made from a brass wound cable with a flexible shaft core, well sealed using rubber shrink material. This solution offers a high reliability and prevents breakage or brittleness. Other frequencies are available upon request. DOWNLOAD PDF

Details

290-70-EB VHF Yagi Antenna

Frequency Range: 138-174 MHz

Gain: 9.5 dBd

The 290-70-EB is a VHF Yagi Antenna with extended boom.

Each antenna has a rugged design to withstand harsh environmental conditions.
The mounting hardware supplied will permit either vertical or horizontal polarization.
DC ground for lightning protection.
Heavy Duty and Black Anodized versions available.

DOWNLOAD PDF DOWNLOAD DIGITAL PATTERN

Details

290-70-HDEB VHF Yagi Antenna

Frequency Range: 138-174 MHz

Gain: 9.5 dBd

The 290-70-HDEB is a VHF Yagi Antenna with extended boom.

Each antenna has a rugged design to withstand harsh environmental conditions.
The mounting hardware supplied will permit either vertical or horizontal polarization.
DC ground for lightning protection.
Black Anodized versions available.

DOWNLOAD PDF DOWNLOAD DIGITAL PATTERN

Details

F-33029D-SM-1/4 Wideband Antenna with Black Anodized Boom and Dipoles

Frequency Range: 138-174 MHz

Gain: 8.0 - 8.5 dBd

The F-33029D-SM-1/4 is is a Wide Band Antenna with Black Anodized boom and dipoles. It is specifically designed for trunked Multicoupler such as X-pass systems. The 1/4 Wavelength dipole to mast spacing offers an offset radiation pattern. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-SM-1/4 has internal cabling design and is not field adjustable.

1/2 wavelength dipole-to-mast spacing is also available for the bidirectional radiation pattern.

3/8 wavelength dipole-to-mast spacing is also available for a radiation pattern between the elliptic and the offset.

DOWNLOAD PDF

Details

F-33029D-SM-1/2 Wideband Antenna with Black Anodized Boom and Dipoles

Frequency Range: 138-174 MHz

Gain: 8.0 - 8.5 dBd

The F-33029D-SM-1/2 is is a Wide Band Antenna with Black Anodized boom and dipoles. It is specifically designed for trunked Multicoupler such as X-pass systems. The 1/2 Wavelength dipole to mast spacing offers a bidirectional radiation pattern. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-SM-1/2 has internal cabling design and is not field adjustable.

1/4 wavelength dipole-to-mast spacing is also available for the offset radiation pattern.

3/8 wavelength dipole-to-mast spacing is also available for a radiation pattern between the elliptic and the offset.

DOWNLOAD PDF

Details

F-33029D-SM-3/8 Wideband Antenna with Black Anodized Boom and Dipoles

Frequency Range: 138-174 MHz

Gain: 8.0 - 8.5 dBd

The F-33029D-SM-3/8 is is a Wide Band Antenna with Black Anodized boom and dipoles. It is specifically designed for trunked Multicoupler such as X-pass systems. The 3/8 Wavelength dipole to mast spacing offers a radiation pattern between the elliptic and the offset. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-SM-3/8 has internal cabling design and is not field adjustable.

1/4 wavelength dipole-to-mast spacing is also available for the offset radiation pattern.

1/2 wavelength dipole-to-mast spacing is also available for a bidirectional radiation pattern.

DOWNLOAD PDF

Details

F-33029D-TM-3/8 Wideband Black Anodized Antenna

Frequency Range: 138-174 MHz

Gain: 8.0 - 8.5 dBd

The F-33029D-TM-3/8 is is a Wideband Black Anodized Antenna. It is specifically designed for trunked Multicoupler such as X-pass systems. The 3/8 Wavelength dipole to mast spacing offers a radiation pattern between the elliptic and the offset. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-TM-3/8 has internal cabling design and is not field adjustable.

1/4 wavelength dipole-to-mast spacing is also available for the offset radiation pattern.

1/2 wavelength dipole-to-mast spacing is also available for a bidirectional radiation pattern.

DOWNLOAD PDF

Details

F-33029D-TM-1/2 Wideband Black Anodized Antenna

Frequency Range: 138-174 MHz

Gain: 8.0 - 8.5 dBd

The F-33029D-TM-1/2 is is a Wideband Black Anodized Antenna. It is specifically designed for trunked Multicoupler such as X-pass systems. The 1/2 Wavelength dipole to mast spacing offers a bidirectional radiation pattern. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-TM-1/2 has internal cabling design and is not field adjustable.

1/4 wavelength dipole-to-mast spacing is also available for the offset radiation pattern.

3/8 wavelength dipole-to-mast spacing is also available for a radiation pattern between the elliptic and the offset.

DOWNLOAD PDF

Details

F-33029D-TM-1/4 Wideband Black Anodized Antenna

Frequency Range: 138-174 MHz

Gain: 8.0 - 8.5 dBd

The F-33029D-TM-1/4 is is a Wideband Black Anodized Antenna. It is specifically designed for trunked Multicoupler such as X-pass systems. The 1/4 Wavelength dipole to mast spacing offers an offset radiation pattern. The antenna is made of Aluminium 6061-T6. This antenna is extremely rugged and is well suited for use in severe environmental conditions. This antenna is a Low Intermod design that incorporates a minimum of moveable joints in its construction and replaces standard castings with heavy duty welded joints. The F-33029D-TM-1/4 has internal cabling design and is not field adjustable.

1/2 wavelength dipole-to-mast spacing is also available for the bidirectional radiation pattern.

3/8 wavelength dipole-to-mast spacing is also available for a radiation pattern between the elliptic and the offset.

DOWNLOAD PDF

Details

290-70-2HDEBNF Yagi Antenna (220 MHz)

Frequency Range: 215-225 MHz

Gain: 9.5 dBd

The 290-70-2HDEBNF is Heavy Duty Yagi Antenna with Extended Boom.

Each antenna has a rugged design to withstand harsh environmental conditions.
The mounting hardware supplied will permit either vertical or horizontal polarization.
The Center Boom (CB) variant is available.
DC ground for lightning protection.

DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS

Details

27-13-0X-NF UWB Public Safety Splitter

Frequency Range: 130-1000 MHz

The Wide-band design series 26-13-0X-NF covers the range of 130-1000 MHz• Available in 2 way, 3-way or 4-way configuration. • 300 Watt power Handling • Airline design to achieve minimum insertion loss • Low PIM Available • Suitable for outdoor and indoor applications • RoHS 2.0 compliant DOWNLOAD PDF

Details

TTA-79-NN-CC Top Tower Amplifier

Frequency Range: 794-824 MHz

Top-Tower Amplifier Our modular Tower-Top Amplifier (TTA) systems provide superior receiver system performance and excellent electrical reliability by improving base station Up Link (UL) sensitivity. TTA systems overcome link budget imbalance between the Up Link and Down Link (DL) by boosting received signal to overcome received path loss (feeder losses).