- This antenna is field adjustable for Omni or Bidirectional coverage.
- 30 dB isolation between antennas.
- Complete internal cabling, fixed dipole-mast spacing, and adjustable pattern control.
-
-
The 872/872F-70-2TM antenna is a wide band dual band antenna designed for multicoupled systems. The antenna covers the 138-174 MHz and 215-225 MHz band, and offers a choice of radiation patterns that are determined by the dipole-to-mast spacing. This antenna is very rugged. It has an internal cabling; it is not field adjustable. The 872/872F-70-2TM antenna is well suited for use in severe environmental conditions. The antenna is offered in a ¼, ⅜ or ½ wave pattern spacing versions. DOWNLOAD PDF DOWNLOAD DIGITAL PATTERNS FOR VHF band DOWNLOAD DIGITAL PATTERNS FOR 215-225 MHz
-
The 876F-70-HDWTM40-1/2 Dual Exposed Dipole is well suited for multicoupled systems due to its wide bandwidth. It has an extremely rugged design for use in severe environmental conditions. The 876F-70-HDWTM40-1/2 has internal cabling and a fix dipole-to-mast spacing. The 876F-70-HDWTM40-1/2 is a special version of the 876F-70 with increased spacing between the two antennas, giving an isolation of 40 dB. This antenna can be black anodized, please contact technical support for more information.
- The 1/4 wave and 3/8 wave versions of the antenna are also available.
- The Side Mount version is available.
-
The 876F-70-2HBSP40DF1/2 Black Anodized Heavy Duty Dual Exposed Dipole is well suited for multicoupled RF system. It has an extremely rugged design for use in severe environmental conditions. It has internal cabling and a fix dipole-to-mast spacing. This antenna is a special version of the 876F-70 with increased spacing between the two antennas, giving an isolation of 40 dB. It’s heavy duty and Low PIM design. Our antennas can be configured for side mount or top mount. This antenna is configured for side mount. The 1/2 wave pattern spacing version offer bidirectional pattern with more than 5 dBd Gain at 220 MHz. The 1/4 wave and 3/8 wave versions of the antenna are also available. DOWNLOAD PDF
-
The 774-70-HDBWTM-1/4 is a Wide Band, Black Anodized, Heavy Duty Welded, UHF Antenna. It is an extremely rugged 4 dipole Antenna designed for multicoupled systems. All our antennas can be customized to your particular applications. Our antennas can be configured for side mount or top mount. This antenna is configured for top mount. The 774-70-HDBWTM-1/4 antenna has internal cabling and fixed dipole-mast spacing. The antenna has either 406-470 MHz or 450-512 MHz split.
- Low VSWR version with maximum gain over specified frequency.
- Heavy Duty and Black Anodized version.
- This antenna is 1/4 wavelength spacing version offering offset radiation pattern.
- Standard connector is N-Male and optional 7/16 DIN or 4.3-10 is also available.
-
- IP 66 rated
-
- IP 66 rated
-
- IP 66 rated
-
- IP 66 rated
-
This compact unidirectional (1 way) RF over Fiber (RFoF) transmitter is designed for conversion of RF signals to optical signals carried over long distances. The Tx unit using an optical transmitter, converts RF to Optical signal and the Rx unit converts back to RF signal. The two units are connected through customer’s single mode fiber.
- Noise Figure 6 dB with LNA with MDS ~-168 dB/Hz for very low incoming signals
- Impedance of 50 Ohm and 75 Ohm
- Gain variation S21 (fo) of ±1 dB for 90° C variation
- Better linearity,
- Excellent gain flatness
- Tx, Rx and Link gain control
- Real-time diagnostic of deployed links through GUI installed on the PC
-
This compact bidirectional (2 way) RF over Fiber (RFoF) transceiver is designed for Transmit/Receive antenna interfaces- applications where both an uplink as well as a downlink are required. The module employs WDM technology to use only 1 fiber link and supports 50-2500, 3000, 4000 and 6000 MHz. The RFoF link has excellent gain flatness and can be configured to have 0.5dB gain tracking between different links.
- Noise Figure 6 dB with LNA
- Impedance of 50 Ohm. 75 Ohm is optional with similar VSWR, by using SMA/BNC adaptor.
- Gain variation S21 (fo) of ±1 dB for 90° C variation
- Better linearity, excellent gain flatness, and Tx, Rx and Link gain control
- Real-time diagnostic of deployed links through GUI installed on the PC
- LNA ‘ON’ or ‘OFF’ is selected by the RFoF user software
-
- IP 66 rated