-
Our new mounting solution UWB-MOUNT-KIT for UWB1301000-NF and UWB1304000-NF has been designed for applications where the antenna will be installed on a surface other than a ceiling or gyprock wall, such as: wood, metal or concrete. DOWNLOAD PDF -
This compact unidirectional (1 way) RF over Fiber (RFoF) transmitter is designed for conversion of RF signals to optical signals carried over long distances. The Tx unit using an optical transmitter, converts RF to Optical signal and the Rx unit converts back to RF signal. The two units are connected through customer’s single mode fiber.
- Noise Figure 6 dB with LNA with MDS ~-168 dB/Hz for very low incoming signals
- Impedance of 50 Ohm and 75 Ohm
- Gain variation S21 (fo) of ±1 dB for 90° C variation
- Better linearity,
- Excellent gain flatness
- Tx, Rx and Link gain control
- Real-time diagnostic of deployed links through GUI installed on the PC
-
Top-Tower Amplifier Our modular Tower-Top Amplifier (TTA) systems provide superior receiver system performance and excellent electrical reliability by improving base station Up Link (UL) sensitivity. TTA systems overcome link budget imbalance between the Up Link and Down Link (DL) by boosting received signal to overcome received path loss (feeder losses).
- Improved base station UL sensitivity
- Redundant LNA with automatic change over
- LNA bypass modes
- Monitoring & Control via GUI
- SNMP Alarms
- Remote Access
-
For optimal performance two bumper antennas are installed in a vehicle: one at the front of the vehicle and one at the rear. The Comprod power splitter (SPLT-BUMP-400900) is designed to help to create an omnidirectional pattern around the vehicle and enable better network coverage. DOWNLOAD PDF
-
PE-48V-480W-55AH-UL: Battery backup system compatible with our VHF/UHF BDA and any other 48V BDA. Features
- Certified to UL 924
- AC input: 115/230 VAC (factory wired for 120 V AC)
- Input protection: AC breaker
- Load protection: DC breaker
- Typical dimensions (H x W x D): 30” x 23” x 10.5”
- Shipping Weight: 114 lbs for 24V system, 230 lbs for 48 V system
- Batteries Included: maintenance free, valve regulated, sealed lead acid 55 AH capacity
- NFPA compliant Dry Contact Alarms for the following conditions:
- Charger Failure
- Battery Discharged to 30 % of capacity.
- AC Power or Rectifier failure
-
PE-24V-240W-55AH-UL: Battery backup system compatible with our VHF/UHF BDA and any other 24V BDA. Features
- Certified to UL 924
- AC input: 115/230 VAC (factory wired for 120 V AC)
- Input protection: AC breaker
- Load protection: DC breaker
- Typical dimensions (H x W x D): 30” x 23” x 10.5”
- Shipping Weight: 114 lbs for 24V system, 230 lbs for 48 V system
- Batteries Included: maintenance free, valve regulated, sealed lead acid 55 AH capacity
- NFPA compliant Dry Contact Alarms for the following conditions:
- Charger Failure
- Battery Discharged to 30 % of capacity.
- AC Power or Rectifier failure
-
The F-3980 is a wide band dual antenna with an 871F-70 on the base and a 792-70 on the top. The antenna offers for the 871F-70 a choice of radiation patterns that are determined by the dipole-to-mast spacing. The F-3980 has an internal cabling and is not field adjustable. The 871F-70 antenna is offered in a ¼, 3/8, or ½ wave pattern spacing versions. SPEC Sheet
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meets the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
- The F-3749B Antenna is available in custom colors for orders of 150 or more.
-
Individually calibrated to ensure the best performance in a disguised appearance
- Two or three separate frequency segments in a given mobile band
- Cross-channel operation in two mobile bands with one antenna
- Alternative antennas will be recommended, where required (e.g. Euro-style, or universal mount traditional whip)
-
Individually calibrated to ensure the best performance in a disguised appearance
- Two or three separate frequency segments in a given mobile band
- Cross-channel operation in two mobile bands with one antenna
- Alternative antennas will be recommended, where required (e.g. Euro-style, or universal mount traditional whip)
-
Constructed from high strength, corrosion resistant aluminum alloy and stainless steel
- Available in VHF, UHF, 800/900 MHz configurations
- Rugged design to withstand harsh environmental conditions
- Circular polarization
- DC ground for lightning protection
-
Designed for covert operations which require an effectively invisible antenna hidden inside the bumper of a vehicle. Installed at the front and rear of the vehicle, this dual kit will help you create an omnidirectional pattern around the vehicle allowing better network coverage and an optimal performance.
- Front and Rear Antenna for covert applications
- No tuning required
- Fits all vehicles
- Waterproof housing
- Flexible material for easy installation
- 25 feet RG-8X feed cable and connector included
