- Front and Rear Antenna for covert applications
- Easy field tunable
- Fits all vehicles
- Waterproof housing
- Flexible material for easy installation
-
Designed for covert operations which require an effectively invisible antenna hidden inside the bumper of a vehicle.
-
Designed for covert operations which require an effectively invisible antenna hidden inside the bumper of a vehicle.
- Antenna for covert applications
- Easy field tunable
- Fits all vehicles
- Waterproof housing
- Flexible material for easy installation
-
This compact bidirectional (2 way) RF over Fiber (RFoF) transceiver is designed for Transmit/Receive antenna interfaces- applications where both an uplink as well as a downlink are required. The module employs WDM technology to use only 1 fiber link and supports 50-2500, 3000, 4000 and 6000 MHz. The RFoF link has excellent gain flatness and can be configured to have 0.5dB gain tracking between different links.
- Noise Figure 6 dB with LNA
- Impedance of 50 Ohm. 75 Ohm is optional with similar VSWR, by using SMA/BNC adaptor.
- Gain variation S21 (fo) of ±1 dB for 90° C variation
- Better linearity, excellent gain flatness, and Tx, Rx and Link gain control
- Real-time diagnostic of deployed links through GUI installed on the PC
- LNA ‘ON’ or ‘OFF’ is selected by the RFoF user software
-
Designed and engineered to meet the fire protection codes (NFPA and IFC standards)
- Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
- Low noise figure, wide dynamic range
- Visual alarms and remote failure monitoring with Graphical User Interface
- FCC and IC certified
- FCC ID: WDM-BDA896941
- IC: 7755A-BDA896941
-
Designed and engineered to meet the fire protection codes (NFPA and IFC standards)
- Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
- Low noise figure, wide dynamic range
- Visual alarms and remote failure monitoring with Graphical User Interface
- FCC and IC certified
- FCC ID: WDM-BDA806870
- IC: 7755A-BDA806870
-
Designed and engineered to meet the fire protection codes (NFPA and IFC standards)
- Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
- Low noise figure, wide dynamic range
- Visual alarms and remote failure monitoring with Graphical User Interface
- FCC and IC certified
- FCC ID: WDM-BDA764806
- IC: 7755A-BDA764806
-
Designed and engineered to meet the fire protection codes (NFPA and IFC standards). Please, note that BDA380512 is a generic number. Actual order number will be assigned to a system design. Specific frequencies are required for this product design.
- Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
- Low noise figure, wide dynamic range
- Visual alarms and remote failure monitoring with Graphical User Interface
- FCC and IC certified
- FCC ID: WDM-BDA380512
- IC: 7755A-BDA380512
-
Designed and engineered to meet the fire protection codes (NFPA and IFC standards). Please, note that BDA138174 is a generic number. Actual order number will be assigned to a system design. Specific frequencies are required for this product design.
- Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
- Low noise figure, wide dynamic range
- Visual alarms and remote failure monitoring with Graphical User Interface
- FCC and IC certified
- FCC ID: WDM-BDA138174
- IC: 7755A-BDA138174
-
Permet la propagation à l’intérieur des bâtiments, de tunnels ou d'environnements publics de radiofréquences externes utilisées à des fins de sécurité publique
- Radôme en Kydex 6200
- Conforme aux normes de sécurité-incendie établies par la Federal Transit Administration (FTA) et la Federal Rail Administration (FRA) et testée en matière d’inflammabilité et d’émission de fumée selon les normes ASTM E-662 et ASTM E-162
-
Rugged design to withstand harsh environmental conditions
- Available in the 700/800/900 MHz configuration (4 frequency splits)
- Vertical or horizontal polarization
- Fully welded for added durability
- Black anodized versions available
-
Rugged design to withstand harsh environmental conditions
- Available in the 700/800/900 MHz configuration (4 frequency splits)
- Vertical or horizontal polarization
- Fully welded for added durability
- Black anodized versions available
-
Rugged design to withstand harsh environmental conditions
- Vertical or horizontal polarization
- Fully welded for added durability
- Black anodized versions available
-
Rugged design to withstand harsh environmental conditions
- Available in the 700/800/900 MHz configuration (5 frequency splits)
- Vertical or horizontal polarization
- Fully welded for added durability
- Black anodized version available
- Mounting hardware (127-85) supplied
- 980-70*5 is our dual band 700/800 MHz antenna: 764-870 MHz
-
Broadband, ideal for point-to-point applications where restrictions on beam width are present
- SRSP-507 Category A Compliant
- Very high front-to-back ratio
- Performance is constant throughout the band
- Mechanical resonance reducing design
- Rugged design to withstand harsh environmental conditions
- Highly-directive parabolic antenna consisting of a back-firing dipole reflector assembly for increased gain and directivity
- Ultra-low VSWR ratings
- Vertical or horizontal polarization
- DC ground for lightning protection
- Black Anodized with a Radome
-
Broadband, ideal for point-to-point applications where restrictions on beam width are present
- SRSP-507 Category A Compliant
- Very high front-to-back ratio
- Performance is constant throughout the band
- Mechanical resonance reducing design
- Rugged design to withstand harsh environmental conditions
- Highly-directive parabolic antenna consisting of a back-firing dipole reflector assembly for increased gain and directivity
- Ultra-low VSWR ratings
- Vertical or horizontal polarization
- DC ground for lightning protection
- Black anodized
-
Broadband, ideal for point-to-point applications where restrictions on beam width are present
- Available in 700/800/900 MHz configuration (3 frequency splits)
- SRSP-507 Category A Compliant
- Very high front-to-back ratio
- Performance is constant throughout the band
- Mechanical resonance reducing design
- Rugged design to withstand harsh environmental conditions
- Highly-directive parabolic antenna consisting of a back-firing dipole reflector assembly for increased gain and directivity
- Ultra-low VSWR ratings
- Vertical or horizontal polarization
- DC ground for lightning protection
-
Frequency Range: 580-6000 MHz Gain: 8-9 dBd
This antenna is a broadband antenna that can be used for public safety as well as in cellular bands. It makes an ideal solution for a donor antenna for a DAS system. Our In-building system antennas are designed to provide excellent coverage solutions in order for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments. Features:- Rugged design to withstand the most extreme environmental conditions.
- Extra wide bandwidth for use in multiple bands.
-
Frequency Range: 580-6000 MHz Gain: 8-9 dBd
This antenna is a broadband antenna that can be used for public safety as well as in cellular bands. It makes an ideal solution for a donor antenna for a DAS system. Our In-building system antennas are designed to provide excellent coverage solutions in order for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments. Features:- Rugged design to withstand the most extreme environmental conditions.
- Extra wide bandwidth for use in multiple bands.
-
Frequency Range: 580-6000 MHz Gain: 8-9 dBd
This antenna is a broadband antenna that can be used for public safety as well as in cellular bands. It makes an ideal solution for a donor antenna for a DAS system. Our In-building system antennas are designed to provide excellent coverage solutions in order for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments. Features:- Rugged design to withstand the most extreme environmental conditions.
- Extra wide bandwidth for use in multiple bands.
-
Frequency Range: 580-6000 MHz Gain: 8-9 dBd
This antenna is a broadband antenna that can be used for public safety as well as in cellular bands. It makes an ideal solution for a donor antenna for a DAS system. Our In-building system antennas are designed to provide excellent coverage solutions in order for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments. Features:- Rugged design to withstand the most extreme environmental conditions.
- Extra wide bandwidth for use in multiple bands.
-
Wide band, ideal for Public Safety and Cellular applications:
- Provides excellent coverage solutions in order for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments.
- Rugged design to withstand the most extreme environmental conditions.
- Extra wide bandwidth for use in multiple bands.
-
Wide band, ideal for Public Safety and Cellular applications:
- Provides excellent coverage solutions in order for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments.
- Rugged design to withstand the most extreme environmental conditions.
- Extra wide bandwidth for use in multiple bands.
-
Wide band, ideal for Public Safety and Cellular applications:
- Provides excellent coverage solutions in order for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments.
- Rugged design to withstand the most extreme environmental conditions.
- Extra wide bandwidth for use in multiple bands.
-
- IP 66 rated
7/16 DIN Female 7/16 DIN Male
DOWNLOAD DIGITAL PATTERNS