IDEALLY SUITED FOR GOVERNMENT AND UTILITY APPLICATIONS
Our Mobile and Transit antennas feature stainless steel whips, high-impact ABS, and gold- plated, spring-loaded contacts when possible, ensuring long-term reliability and performance.
Our multi-band antennas have been developed for transmitting and receiving Data and Voice.
We have also customized many wideband and full band VHF, UHF, and 700/800/900 MHz antenna models for unique requirements.
-
F-3990 This VHF antenna is designed for applications that require peak performance in the 136-174 MHz while tolerating a VSWR around 2.0:1. This antenna has a loading coil between the radiating element and the base. This coil increases the electrical length and makes the antenna perform electrically as a 1/4 wave antenna, but shorter than a regular 1/4 wave antenna. Typical gain, when mounted on a ground plane, is comparable to a full 1/4 wave. Mounts on NMO. The upper element is made from a brass wound cable with a flexible shaft core, well sealed using rubber shrink material. This solution offers a high reliability and prevents breakage or brittleness. Other frequencies are available upon request. DOWNLOAD PDF -
Our line of radome transit antennas for operation in the 806-960 MHz band consists of compact, low profile antennas in weatherproof ABS radomes. When mounted on a horizontal surface, maximum radiation is omnidirectional and vertically polarized. These antennas are an excellent choice for low clearance applications such as those found on trains, mass transit vehicles, construction equipment and police and emergency vehicles. The F-3758 model is a standard, folded radiator housed in a sturdy high-impact ABS radome. To ensure a moisture proof installation, the F-3758 model is supplied with a mounting gasket. DOWNLOAD PDF
-
Our premium dual-band antennas feature heavy-duty design and excellent performance. Perfect for both voice and data transmission. These antennas are optimized for the band 138-145MHz and 810-860 MHz.
- Manufactured using the bestcorrosion resistant materials and finishes available
- Ideal for commercial applications in harsh environment
- Weatherproof rubber boot seals and overlap construction
- Standard Mounting TAD/NMO type mount
-
Our premium dual-band antennas feature heavy-duty design and excellent performance. Perfect for both voice and data transmission. These antennas are optimized for the band 138-145MHz and 810-860 MHz.
- Manufactured using the bestcorrosion resistant materials and finishes available
- Ideal for commercial applications in harsh environment
- Weatherproof rubber boot seals and overlap construction
- Standard Mounting TAD/NMO type mount
-
The F-33499 is a Covert Vehicle Antenna disguised in Shark Fin housing. This antenna provides 0 dBd of gain and less than 1.7:1 VSWR over 10 MHz bandwidth in the range of frequency of 406 to 470MHz. It has a radiation pattern nearly omnidirectional in azimuth. The shark fin style disguised antennas allow a public security organization to use a vehicle’s existing AM/FM antennas for both conventional radio receiver functions as well as allowing a two-way radio to communicate over the same antenna. This allows a covert vehicle to avoid the need for a long mobile antenna.
- 0 dBd of gain
- Less than 1.7:1 VSWR over its operating bandwidth
- A radiation pattern nearly omnidirectional in azimuth
- A broadcast coupler is optionally available
- Cross-band couplers when multi-band operation required on a single antenna
-
The F-33496 is a Covert Vehicle Antenna disguised in Shark Fin housing. The shark fin style disguised antennas allow a public security organization to use a vehicle’s existing AM/FM antennas for both conventional radio receiver functions as well as allowing a two-way radio to communicate over the same antenna. This allows a covert vehicle to avoid the need for a long mobile antenna. A broadcast coupler is optionally available, to allow the two- way radio transmit and receive frequencies to be shared with the vehicle’s AM/FM radio. The coupler prevents the transmit radio from damaging the AM/FM radio.
- 0 dBd of gain
- Less than 1.7:1 VSWR over its operating bandwidth
- A radiation pattern nearly omnidirectional in azimuth
- A broadcast coupler is optionally available
- Cross-band couplers when multi-band operation required on a single antenna
-
Ideal for low clearance applications such as those found on trains, public transit vehicles.
- Low-profile rugged alternative to a 1/4 wave whip mobile antenna
- When mounted on a horizontal surface, maximum radiation is omnidirectional and vertically polarized
- Impact-resistant ABS radome
-
For optimal performance two bumper antennas are installed in a vehicle: one at the front of the vehicle and one at the rear. The Comprod power splitter (SPLT-BUMP-400900) is designed to help to create an omnidirectional pattern around the vehicle and enable better network coverage. DOWNLOAD PDF
-
Designed for covert operations which require an effectively invisible antenna hidden inside the bumper of a vehicle. Installed at the front and rear of the vehicle, this dual kit will help you create an omnidirectional pattern around the vehicle allowing better network coverage and an optimal performance.
- Bumper Antenna for covert applications
- No tuning required
- Fits all vehicles
- Waterproof housing
- Flexible material for easy installation
- 17 feet RG-8X feed cable and connector included
-
Designed for covert operations which require an effectively invisible antenna hidden inside the bumper of a vehicle. Installed at the front and rear of the vehicle, this dual kit will help you create an omnidirectional pattern around the vehicle allowing better network coverage and an optimal performance.
- Front and Rear Antenna for covert applications
- No tuning required
- Fits all vehicles
- Waterproof housing
- Flexible material for easy installation
- 25 feet RG-8X feed cable and connector included
-
Designed for covert operations which require an effectively invisible antenna hidden inside the bumper of a vehicle.
- Front and Rear Antenna for covert applications
- Easy field tunable
- Fits all vehicles
- Waterproof housing
- Flexible material for easy installation
-
Designed for covert operations which require an effectively invisible antenna hidden inside the bumper of a vehicle.
- Antenna for covert applications
- Easy field tunable
- Fits all vehicles
- Waterproof housing
- Flexible material for easy installation
-
- Frequency range of 138-174 MHz
- Unity gain achieved over its operating bandwidth
- Used for vehicles, such as ambulances, where vertical clearance is critical
- This antenna is ideal for a vehicle that enters areas with reduced headroom
- Combined with a matching circuit that is mounted inside the vehicle
- Each antenna assembly is individually calibrated on the roof of a vehicle
-
Individually calibrated to ensure the best performance in a disguised appearance
- Two or three separate frequency segments in a given mobile band
- Cross-channel operation in two mobile bands with one antenna
- Alternative antennas will be recommended, where required (e.g. Euro-style, or universal mount traditional whip)
-
- Provides a dual band frequency range of 700/800 MHz or 800/900 MHz Public Safety bands.
- 2.0 dBd gain achieved over its operating bandwidth
- Manufactured using the best corrosion-resistant materials and finishes available
- Ultrasonically-welded brass insert and leaf spring-loaded contact for long-term reliability
- Standard NMO type mount providing an excellent moisture seal even when the antenna is removed
-
- Gain of unity over its operating bandwidth
- Manufactured using the best corrosion-resistant materials and finishes available
- Triple-plated chrome brass with a large insert molded low-loss coil form and spring-loaded, gold-plated contact
- Rubber boot to ensure a moisture-proof installation
- Standard TAD / NMO type mount
-
Individually calibrated to ensure the best performance in a disguised appearance
- Two or three separate frequency segments in a given mobile band
- Cross-channel operation in two mobile bands with one antenna
- Alternative antennas will be recommended, where required (e.g. Euro-style, or universal mount traditional whip)
-
Broadband 1/2-wave antenna - no ground plane needed
- Manufactured using the best corrosion-resistant materials and finishes available
- Triple-plated chrome brass with a large insert, molded low-loss coil form and spring-loaded gold-plated contact
- Rubber boot ensures a moisture-proof installation/avoid scratching or rusting of the vehicle
-
Broadband 1/2-wave antenna - no ground plane needed
- Manufactured using the best corrosion-resistant materials and finishes available
- Triple-plated chrome brass with a large insert, molded low-loss coil form and spring-loaded gold-plated contact
- Rubber boot to ensure a moisture-proof installation/avoid scratching or rusting of the vehicle
-
Ideal for low clearance applications such as those found on trains, public transit vehicles, construction equipment and police vehicles
-
- Low-profile rugged alternative to a ¼-wave whip mobile antenna
- When mounted on a horizontal surface, maximum radiation is omnidirectional and vertically polarized
- High strength cast aluminum design
-
-
- 3.0 dBd gain achieved by featuring a 5/8-wave above a 1/4 wave closed coil design
- Manufactured using the best corrosion-resistant materials and finishes available
- Magnetic Mounting: Features a powerful magnetic base with a protective Mylar to prevent damage to any mounting service. It is supplied with 12 feet of RG58U coax and your choice of connector. Available with Mini-UHF or TNC connector.
-
- Addresses First Responder requirements
- 3.0 dBd gain achieved by featuring a 5/8-wave above a 1/4 wave closed coil design
- Manufactured using the best corrosion-resistant materials and finishes available
- Ultrasonically-welded brass insert and leaf spring-loaded contact for long-term reliability
- Standard NMO type mount providing an excellent moisture seal even when the antenna is removed
-
Comprod is a leader in the design of RF filtering and coupling devices. The following are the specifications for couplers and tuners required as part of a disguised antenna solution.
- Broadcast couplers - allow AM-FM broadcast receiver operation along with normal two-way mobile radio operation.
- Crossband couplers - allow mobile radios on two different bands to operate with a single disguised antenna.
- Antenna tuners - provide impedance matching and partly retuning the existing antenna to new frequencies.
-
Designed to meet customers' special requirements
- Two or three separate frequency segments in a given mobile band
- Cross-channel operation in two mobile bands with one antenna
