- Available in 700/800/900 MHz configuration (2 frequency splits)
- Rugged design to withstand the most extreme environmental conditions
- The mounting hardware supplied will permit 0.75” to 2.3/8” O.D. pipe installation.
- DC ground for lightning protection
-
Very large bandwidth which make it ideal for emergency use or resale
-
Available in three frequency splits: 746-806; 806-869 or 885-960 within the 746 to 960 MHz range.
- Constructed with a high quality fiberglass light-grey radome
- Aluminum mounting hardware included with the antenna
-
Unity gain in a wideband design for heavy-duty service
- Manufactured using the best corrosion-resistant materials and finishes available
- Ultrasonically-welded brass insert and a gold-plated spring-loaded contact
- Shipped with a factory tuned whip cut to size based on the customer specified frequency range between 136 MHz and 960 MHz
- Standard Motorola NMO type mount providing an excellent moisture seal even when the antenna is removed
-
Permet la propagation à l’intérieur des bâtiments, de tunnels ou d'environnements publics de radiofréquences externes utilisées à des fins de sécurité publique
- Radôme en Kydex 6200
- Conforme aux normes de sécurité-incendie établies par la Federal Transit Administration (FTA) et la Federal Rail Administration (FRA) et testée en matière d’inflammabilité et d’émission de fumée selon les normes ASTM E-662 et ASTM E-162
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Designed to pass a frequency band and reject a narrow band of frequencies
- Can reject frequencies on either the high or low side of the pass frequency
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference
-
Unity gain in a wideband design for heavy-duty service
- Manufactured using the best corrosion-resistant materials and finishes available
- Ultrasonically-welded brass insert and a gold-plated spring-loaded contact
- Shipped with a 19” whip that can be cut by the customer to any frequency between 136 MHz and 960 MHz
- Standard Motorola NMO type mount providing an excellent moisture seal even when the antenna is removed
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Designed for mounting on a concrete surface to meet full bandwidth specifications
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
- Flame resistant and self-extinguishing polycarbonate tubing is used for the radome
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
- The F-3749 Antenna is available in custom colors for orders of 150 or more.
-
Designed for external Public Safety Radio Frequencies to propagate within buildings, tunnels or public use environments
- Offered with Fire Retardant 6200 Kydex
- Meet the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162
-
- 3.0 dBd gain achieved by featuring a 5/8-wave above a ¼ wave open coil design
- Manufactured using the best corrosion-resistant materials and finishes available
- Ultrasonically-welded brass insert and leaf spring-loaded contact for long-term reliability
- Standard NMO type mount providing an excellent moisture seal even when the antenna is removed
-
- 3.0 dBd gain achieved by featuring a 5/8-wave above a ¼ wave design
- Manufactured using the best corrosion-resistant materials and finishes available
- Ultrasonically-welded brass insert and leaf spring-loaded contact for long-term reliability
- Standard NMO type mount providing an excellent moisture seal even when the antenna is removed
-
- Provides a dual band frequency range of 700/800 MHz or 800/900 MHz Public Safety bands.
- 2.0 dBd gain achieved over its operating bandwidth
- Manufactured using the best corrosion-resistant materials and finishes available
- Ultrasonically-welded brass insert and leaf spring-loaded contact for long-term reliability
- Standard NMO type mount providing an excellent moisture seal even when the antenna is removed
-
- 3.0 dBd gain achieved by featuring a 5/8-wave above a 1/4 wave closed coil design
- Manufactured using the best corrosion-resistant materials and finishes available
- Magnetic Mounting: Features a powerful magnetic base with a protective Mylar to prevent damage to any mounting service. It is supplied with 12 feet of RG58U coax and your choice of connector. Available with Mini-UHF or TNC connector.
-
- Addresses First Responder requirements
- 3.0 dBd gain achieved by featuring a 5/8-wave above a 1/4 wave closed coil design
- Manufactured using the best corrosion-resistant materials and finishes available
- Ultrasonically-welded brass insert and leaf spring-loaded contact for long-term reliability
- Standard NMO type mount providing an excellent moisture seal even when the antenna is removed
-
- 3.0 dBd gain achieved by featuring a 5/8-wave above a 1/2 wave closed coil design
- Manufactured using the best corrosion-resistant materials and finishes available
- Ultrasonically-welded brass insert and leaf spring-loaded contact for long-term reliability
- Standard NMO type mount providing an excellent moisture seal even when the antenna is removed
-
Designed and engineered to meet the fire protection codes (NFPA and IFC standards)
- Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
- Low noise figure, wide dynamic range
- Visual alarms and remote failure monitoring with Graphical User Interface
- FCC and IC certified
- FCC ID: WDM-BDA764806
- IC: 7755A-BDA764806
-
- 3.5 dBd gain achieved by featuring a 5/8-wave above a ¼ wave design
- Manufactured using the best corrosion-resistant materials and finishes available
- Features an integrated shock spring and a heavy-duty stainless steel whip that is designed to withstand severe shock
- Ultrasonically-welded brass insert and gold-plated, spring-loaded contact
- O-ring seals and overlap construction to ensure a moisture-proof installation
- Standard Motorola NMO type connector
-
Designed and engineered to meet the fire protection codes (NFPA and IFC standards)
- Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
- Low noise figure, wide dynamic range
- Visual alarms and remote failure monitoring with Graphical User Interface
- FCC and IC certified
- FCC ID: WDM-BDA806870
- IC: 7755A-BDA806870
-
No ground plane antenna – Collinear design
- 3.0 dBd gain achieved by featuring a 5/8-wave above a ¼ wave design
- Elevated feed point that is ideal for the RF signal to clear any nearby obstructions
- Keeps the signals above and away from the passenger compartment
- Features a built-in shock spring and a spring-loaded contact for long-term dependability
- Standard NMO type mount providing an excellent moisture seal even when the antenna is removed
-
Designed and engineered to meet the fire protection codes (NFPA and IFC standards)
- Rack mounted or in NEMA 4/4x waterproof, stainless steel enclosures
- Low noise figure, wide dynamic range
- Visual alarms and remote failure monitoring with Graphical User Interface
- FCC and IC certified
- FCC ID: WDM-BDA896941
- IC: 7755A-BDA896941
-
Perfect for both voice and data transmissions
- Very wide in bandwidth
- Low profile, extremely rugged and ideal for commercial applications
- Manufactured using the best corrosion-resistant materials and finishes available
- O-ring seals and overlap construction to ensure a moisture-proof installation
- Standard Motorola NMO type mount
-
Perfect for both voice and data transmissions
- Very wide in bandwidth
- Low profile, extremely rugged and ideal for commercial applications
- Manufactured using the best corrosion-resistant materials and finishes available
- O-ring seals and overlap construction to ensure a moisture-proof installation
- Standard Motorola NMO type mount
-
Perfect for both voice and data transmissions
- Very wide in bandwidth
- Low profile, extremely rugged and ideal for commercial applications
- Manufactured using the best corrosion-resistant materials and finishes available
- O-ring seals and overlap construction to ensure a moisture-proof installation
- Standard Motorola NMO type mount
-
Perfect for both voice and data transmissions
- Very wide in bandwidth
- Low profile, extremely rugged and ideal for commercial applications
- Manufactured using the best corrosion-resistant materials and finishes available
- O-ring seals and overlap construction to ensure a moisture-proof installation
- Standard Motorola NMO type mount
-
Ideal for high power, close frequency separation installations
- Designed for combining two frequencies that require extra isolation. Can also be used as efficient pre-selectors
- Temperature compensated to ensure frequency stability
- High attenuation to minimize desense and interference from adjacent systems
- Adjustable loops
-
Ideal for low clearance applications such as those found on trains, mass transit vehicles, construction equipment and police and emergency vehicles
- When mounted on a horizontal surface, maximum radiation is omnidirectional and vertically polarized
- Standard, folded radiator housed in a sturdy high impact ABS radome
- Supplied with a mounting gasket to ensure a moisture-proof installation
-
Ideal for low clearance applications such as those found on trains, mass transit vehicles, construction equipment and police and emergency vehicles
- Compact, low profile antennas in weatherproof ABS radomes
- When mounted on a horizontal surface, maximum radiation is omnidirectional and vertically polarized
- Space diversity design that provides greater communication reliability in a fading environment
- Supplied with an O-ring to ensure a moisture-proof installation
-
Ideal for combining multiple Rx frequencies onto the same antenna
- Available in 2, 4, 8, 12, 16 and 32
- Simple and cost-effective design
- Standard 19” Rack Mount (RM) or cavity-mounted (CM) versions
- Each unit consists of a power splitter and an RF amplifier.
- Plug-in Power Supply (PS) optional
-
Ideal for combining multiple Rx frequencies onto the same antenna
- Available in 2, 4, 8, 12, 16 and 32
- Simple and cost-effective design
- Standard 19” Rack Mount (RM) or cavity-mounted (CM) versions
- Each unit consists of a power splitter and an RF amplifier.
- Plug-in Power Supply (PS) optional
-
Combines multiple receiver frequencies onto the same antenna
- A low noise amplifier provides gain across the frequency band
- Low noise figure and low intermodulation generation
- Features up to 16 ports (24 and 32 port versions are available)
- -30 dB signal sampler port that can also be used to inject a signal